RE: [PATCH 03/14] arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon

[James Tai]

> Group the non-iso reset controller nodes into a CRT syscon mfd node.
> Group reset controller, watchdog and UART0 into an Isolation mfd node.
> Group UART1 and UART2 into a Miscellaneous syscon mfd node.
> 
> Cc: James Tai <james.tai@xxxxxxxxxxx>
> Signed-off-by: Andreas FÃrber <afaerber@xxxxxxx>
> ---
>  arch/arm64/boot/dts/realtek/rtd139x.dtsi | 147
> +++++++++++++++++++------------
>  1 file changed, 90 insertions(+), 57 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> index c11a505e43e2..3a571f3b7e38 100644
> --- a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> @@ -61,70 +61,31 @@
>  			#size-cells = <1>;
>  			ranges = <0x0 0x98000000 0x200000>;
> 
> -			reset1: reset-controller@0 {
> -				compatible = "snps,dw-low-reset";
> -				reg = <0x0 0x4>;
> -				#reset-cells = <1>;
> -			};
> -
> -			reset2: reset-controller@4 {
> -				compatible = "snps,dw-low-reset";
> -				reg = <0x4 0x4>;
> -				#reset-cells = <1>;
> -			};
> -
> -			reset3: reset-controller@8 {
> -				compatible = "snps,dw-low-reset";
> -				reg = <0x8 0x4>;
> -				#reset-cells = <1>;
> -			};
> -
> -			reset4: reset-controller@50 {
> -				compatible = "snps,dw-low-reset";
> -				reg = <0x50 0x4>;
> -				#reset-cells = <1>;
> -			};
> -
> -			iso_reset: reset-controller@7088 {
> -				compatible = "snps,dw-low-reset";
> -				reg = <0x7088 0x4>;
> -				#reset-cells = <1>;
> -			};
> -
> -			wdt: watchdog@7680 {
> -				compatible = "realtek,rtd1295-watchdog";
> -				reg = <0x7680 0x100>;
> -				clocks = <&osc27M>;
> -			};
> -
> -			uart0: serial@7800 {
> -				compatible = "snps,dw-apb-uart";
> -				reg = <0x7800 0x400>;
> -				reg-shift = <2>;
> +			crt: syscon@0 {
> +				compatible = "syscon", "simple-mfd";
> +				reg = <0x0 0x1000>;
>  				reg-io-width = <4>;
> -				clock-frequency = <27000000>;
> -				resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
> -				status = "disabled";
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0x0 0x0 0x1000>;
>  			};
> 
> -			uart1: serial@1b200 {
> -				compatible = "snps,dw-apb-uart";
> -				reg = <0x1b200 0x100>;
> -				reg-shift = <2>;
> +			iso: syscon@7000 {
> +				compatible = "syscon", "simple-mfd";
> +				reg = <0x7000 0x1000>;
>  				reg-io-width = <4>;
> -				clock-frequency = <432000000>;
> -				resets = <&reset2 RTD1295_RSTN_UR1>;
> -				status = "disabled";
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0x0 0x7000 0x1000>;
>  			};
> 
> -			uart2: serial@1b400 {
> -				compatible = "snps,dw-apb-uart";
> -				reg = <0x1b400 0x100>;
> -				reg-shift = <2>;
> +			misc: syscon@1b000 {
> +				compatible = "syscon", "simple-mfd";
> +				reg = <0x1b000 0x1000>;
>  				reg-io-width = <4>;
> -				clock-frequency = <432000000>;
> -				resets = <&reset2 RTD1295_RSTN_UR2>;
> -				status = "disabled";
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0x0 0x1b000 0x1000>;
>  			};
>  		};
> 
> @@ -140,3 +101,75 @@
>  		};
>  	};
>  };
> +
> +&crt {
> +	reset1: reset-controller@0 {
> +		compatible = "snps,dw-low-reset";
> +		reg = <0x0 0x4>;
> +		#reset-cells = <1>;
> +	};
> +
> +	reset2: reset-controller@4 {
> +		compatible = "snps,dw-low-reset";
> +		reg = <0x4 0x4>;
> +		#reset-cells = <1>;
> +	};
> +
> +	reset3: reset-controller@8 {
> +		compatible = "snps,dw-low-reset";
> +		reg = <0x8 0x4>;
> +		#reset-cells = <1>;
> +	};
> +
> +	reset4: reset-controller@50 {
> +		compatible = "snps,dw-low-reset";
> +		reg = <0x50 0x4>;
> +		#reset-cells = <1>;
> +	};
> +};
> +
> +&iso {
> +	iso_reset: reset-controller@88 {
> +		compatible = "snps,dw-low-reset";
> +		reg = <0x88 0x4>;
> +		#reset-cells = <1>;
> +	};
> +
> +	wdt: watchdog@680 {
> +		compatible = "realtek,rtd1295-watchdog";
> +		reg = <0x680 0x100>;
> +		clocks = <&osc27M>;
> +	};
> +
> +	uart0: serial@800 {
> +		compatible = "snps,dw-apb-uart";
> +		reg = <0x800 0x400>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clock-frequency = <27000000>;
> +		resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
> +		status = "disabled";
> +	};
> +};
> +
> +&misc {
> +	uart1: serial@200 {
> +		compatible = "snps,dw-apb-uart";
> +		reg = <0x200 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clock-frequency = <432000000>;
> +		resets = <&reset2 RTD1295_RSTN_UR1>;
> +		status = "disabled";
> +	};
> +
> +	uart2: serial@400 {
> +		compatible = "snps,dw-apb-uart";
> +		reg = <0x400 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clock-frequency = <432000000>;
> +		resets = <&reset2 RTD1295_RSTN_UR2>;
> +		status = "disabled";
> +	};
> +};
> --
> 2.16.4
> 
> 

Acked-by: James Tai <james.tai@xxxxxxxxxxx>