Re: [PATCH 3/3] dt-bindings: PCI: Convert generic host binding to DT schema

[Geert Uytterhoeven]

Hi Rob,

On Tue, Dec 31, 2019 at 12:30 AM Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, Dec 12, 2019 at 7:41 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> > On Sat, Nov 16, 2019 at 1:53 AM Rob Herring <robh@xxxxxxxxxx> wrote:
> > > Convert the generic PCI host binding to DT schema. The derivative Juno,
> > > PLDA XpressRICH3-AXI, and Designware ECAM bindings all just vary in
> > > their compatible strings. The simplest way to convert those to
> > > schema is just add them into the common generic PCI host schema.
> > >
> > > Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> > > Cc: Andrew Murray <andrew.murray@xxxxxxx>
> > > Cc: Zhou Wang <wangzhou1@xxxxxxxxxxxxx>
> > > Cc: Will Deacon <will@xxxxxxxxxx>
> > > Cc: David Daney <david.daney@xxxxxxxxxx>
> > > Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> >
> > > index 515b2f9542e5..000000000000
> > > --- a/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt
> > > +++ /dev/null
> >
> > > -Example:
> > > -
> > > -    pcie1: pcie@7f000000 {
> > > -        compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam";
> > > -        device_type = "pci";
> > > -        reg = <0x0 0x7f000000 0x0 0xf00000>;
> > > -        bus-range = <0x0 0xe>;
> > > -        #address-cells = <3>;
> > > -        #size-cells = <2>;
> > > -        ranges = <0x1000000 0x00 0x00010000 0x00 0x7ff00000 0x0 0x00010000>,
> > > -                 <0x2000000 0x00 0x70000000 0x00 0x70000000 0x0 0x0f000000>,
> > > -                 <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>;
> > > -
> > > -        #interrupt-cells = <0x1>;
> > > -        interrupt-map-mask = <0x0 0x0 0x0 0x0>;
> >
> > An all-zeroes interrupt-map-mask seems to be very common on embedded
> > SoCs, where all devices are mapped to a single interrupt.
>
> Indeed.
>
> > However, schemas/pci/pci-bus.yaml says:
> >
> >   interrupt-map-mask:
> >     items:
> >       - description: PCI high address cell
> >         minimum: 0
> >         maximum: 0xf800
> >       - description: PCI mid address cell
> >         const: 0
> >       - description: PCI low address cell
> >         const: 0
> >       - description: PCI IRQ cell
> >         minimum: 1
> >         maximum: 7
> >
> > and thus complains about an all-zeroes mask, e.g.
> >
> >     arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dt.yaml:
> > pcie@fe000000: interrupt-map-mask:0:3: 0 is less than the minimum of 1
>
> Now fixed.

Thank you, confirmed.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds