[PATCH v3 3/9] ARM: dts: sun8i: r40: Use tcon top clock index macros

[Jagan Teki]

tcon_tv0, tcon_tv1 nodes have a clock names of tcon-ch0,
tcon-ch1 which are referring tcon_top clocks via index
numbers like 0, 1 with CLK_TCON_TV0 and CLK_TCON_TV1
respectively.

Use the macro in place of index numbers, for more code
readability.

Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
Changes for v3:
- none

 arch/arm/boot/dts/sun8i-r40.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index c9c2688db66d..3faa35d43afa 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -44,6 +44,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
 #include <dt-bindings/reset/sun8i-r40-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 
@@ -709,7 +710,7 @@
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c73000 0x1000>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
 			clock-names = "ahb", "tcon-ch1";
 			resets = <&ccu RST_BUS_TCON_TV0>;
 			reset-names = "lcd";
@@ -752,7 +753,7 @@
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c74000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
 			clock-names = "ahb", "tcon-ch1";
 			resets = <&ccu RST_BUS_TCON_TV1>;
 			reset-names = "lcd";
-- 
2.18.0.321.gffc6fa0e3