Re: [PATCH v2 1/4] drm/sun4i: Reimplement plane z position setting logic

From: Jernej Åkrabec
Date: Tue Dec 31 2019 - 08:52:47 EST

Next message: Namjae Jeon: "Re: [PATCH v8 08/13] exfat: add exfat cache"
Previous message: Namjae Jeon: "Re: [PATCH v8 01/13] exfat: add in-memory and on-disk structures and headers"
In reply to: Roman Stratiienko: "Re: [PATCH v2 1/4] drm/sun4i: Reimplement plane z position setting logic"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi!

Dne nedelja, 29. december 2019 ob 17:28:25 CET je
roman.stratiienko@xxxxxxxxxxxxxxx napisal(a):
> From: Roman Stratiienko <roman.stratiienko@xxxxxxxxxxxxxxx>
>
> To set blending channel order register software needs to know state and
> position of each channel, which impossible at plane commit stage.
>
> Move this procedure to atomic_flush stage, where all necessary information
> is available.
>
> Fixes: f88c5ee77496 ("drm/sun4i: Implement zpos for DE2")
> Signed-off-by: Roman Stratiienko <roman.stratiienko@xxxxxxxxxxxxxxx>
> ---
> v2:
> - Use SUN8I_MIXER_MAX_LAYERS macro
> - Use plane_cnt instead of hard-coded number
> - Put initialization of channel_zpos into for loop
> - Add 'Fixes' line to the commit message
> - Minor clean-ups
> - Comments added
> ---
> drivers/gpu/drm/sun4i/sun8i_mixer.c | 52 +++++++++++++++++++++++++-
> drivers/gpu/drm/sun4i/sun8i_mixer.h | 5 +++
> drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 42 +++------------------
> drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 39 +++----------------
> 4 files changed, 66 insertions(+), 72 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> b/drivers/gpu/drm/sun4i/sun8i_mixer.c index 8b803eb903b8..d306ad5dc093
> 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> @@ -259,8 +259,54 @@ const struct de2_fmt_info *sun8i_mixer_format_info(u32
> format)
>
> static void sun8i_mixer_commit(struct sunxi_engine *engine)
> {
> - DRM_DEBUG_DRIVER("Committing changes\n");
> + struct sun8i_mixer *mixer = engine_to_sun8i_mixer(engine);
> + u32 base = sun8i_blender_base(mixer);
> + int i, j = 0;
> + int channel_by_zpos[SUN8I_MIXER_MAX_LAYERS];
> + u32 route = 0, pipe_ctl = 0;
> + int plane_cnt = mixer->cfg->vi_num + mixer->cfg->ui_num;

Can you please sort above lines by size (longest to shortest) as much as
possible?

> +
> + DRM_DEBUG_DRIVER("Update blender routing\n");
> + /* Assume that values in mixer->channel_zpos[] are unique except -1
*/

I would remove "Assume that" because it's guaranteed by zpos normalization in
DRM core.

> +
> + for (i = 0; i < plane_cnt; i++)
> + channel_by_zpos[i] = -1;
>
> + /* Sort by zpos */
> + for (i = 0; i < plane_cnt; i++) {
> + int zpos = mixer->channel_zpos[i];
> +
> + if (zpos >= 0 && zpos < plane_cnt)
> + channel_by_zpos[zpos] = i;
> + }
> +
> + /* Route enabled blending channels first */
> + for (i = 0; i < plane_cnt; i++) {
> + int ch = channel_by_zpos[i];
> +
> + if (ch >= 0) {
> + pipe_ctl |= SUN8I_MIXER_BLEND_PIPE_CTL_EN(j);
> + route |= ch <<
SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(j);
> + j++;
> + }
> + }
> +
> + /* Set remaining routing fields to match disabled channel indices */
> + for (i = 0; i < SUN8I_MIXER_MAX_LAYERS && j <
SUN8I_MIXER_MAX_LAYERS;
> + i++) {
> + if (mixer->channel_zpos[i] < 0) {
> + route |= i <<
SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(j);
> + j++;
> + }
> + }

Is above for loop really necessary? If pipe is not enabled I don't think you
need to set a route.

> +
> + regmap_update_bits(mixer->engine.regs,
SUN8I_MIXER_BLEND_PIPE_CTL(base),
> + SUN8I_MIXER_BLEND_PIPE_CTL_EN_MSK,
pipe_ctl);
> +
> + regmap_write(mixer->engine.regs,
> + SUN8I_MIXER_BLEND_ROUTE(base), route);
> +
> + DRM_DEBUG_DRIVER("Committing changes\n");
> regmap_write(engine->regs, SUN8I_MIXER_GLOBAL_DBUFF,
> SUN8I_MIXER_GLOBAL_DBUFF_ENABLE);
> }
> @@ -485,10 +531,12 @@ static int sun8i_mixer_bind(struct device *dev, struct
> device *master, SUN8I_MIXER_BLEND_COLOR_BLACK);
>
> plane_cnt = mixer->cfg->vi_num + mixer->cfg->ui_num;
> - for (i = 0; i < plane_cnt; i++)
> + for (i = 0; i < plane_cnt; i++) {
> + mixer->channel_zpos[i] = -1;
> regmap_write(mixer->engine.regs,
> SUN8I_MIXER_BLEND_MODE(base, i),
> SUN8I_MIXER_BLEND_MODE_DEF);
> + }
>
> regmap_update_bits(mixer->engine.regs,
SUN8I_MIXER_BLEND_PIPE_CTL(base),
> SUN8I_MIXER_BLEND_PIPE_CTL_EN_MSK, 0);
> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.h
> b/drivers/gpu/drm/sun4i/sun8i_mixer.h index c6cc94057faf..b193d9d1db66
> 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_mixer.h
> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.h
> @@ -13,6 +13,8 @@
> #include "sun8i_csc.h"
> #include "sunxi_engine.h"
>
> +#define SUN8I_MIXER_MAX_LAYERS 5
> +
> #define SUN8I_MIXER_SIZE(w, h) (((h) - 1) << 16 |
((w) - 1))
> #define SUN8I_MIXER_COORD(x, y) ((y) << 16 | (x))
>
> @@ -176,6 +178,9 @@ struct sun8i_mixer {
>
> struct clk *bus_clk;
> struct clk *mod_clk;
> +
> + /* -1 means that layer is disabled */
> + int channel_zpos[SUN8I_MIXER_MAX_LAYERS];
> };
>
> static inline struct sun8i_mixer *
> diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c index c87fd842918e..ee7c13d8710f
> 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> @@ -24,12 +24,10 @@
> #include "sun8i_ui_scaler.h"
>
> static void sun8i_ui_layer_enable(struct sun8i_mixer *mixer, int channel,
> - int overlay, bool enable,
unsigned int zpos,
> - unsigned int old_zpos)
> + int overlay, bool enable,
unsigned int zpos)
> {
> - u32 val, bld_base, ch_base;
> + u32 val, ch_base;
>
> - bld_base = sun8i_blender_base(mixer);
> ch_base = sun8i_channel_base(mixer, channel);
>
> DRM_DEBUG_DRIVER("%sabling channel %d overlay %d\n",
> @@ -44,32 +42,7 @@ static void sun8i_ui_layer_enable(struct sun8i_mixer
> *mixer, int channel, SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch_base, overlay),
> SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN, val);
>
> - if (!enable || zpos != old_zpos) {
> - regmap_update_bits(mixer->engine.regs,
> -
SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> -
SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
> - 0);
> -
> - regmap_update_bits(mixer->engine.regs,
> -
SUN8I_MIXER_BLEND_ROUTE(bld_base),
> -
SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
> - 0);
> - }
> -
> - if (enable) {
> - val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
> -
> - regmap_update_bits(mixer->engine.regs,
> -
SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> - val, val);
> -
> - val = channel <<
SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(zpos);
> -
> - regmap_update_bits(mixer->engine.regs,
> -
SUN8I_MIXER_BLEND_ROUTE(bld_base),
> -
SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(zpos),
> - val);
> - }
> + mixer->channel_zpos[channel] = enable ? zpos : -1;
> }
>
> static int sun8i_ui_layer_update_coord(struct sun8i_mixer *mixer, int
> channel, @@ -265,11 +238,9 @@ static void
> sun8i_ui_layer_atomic_disable(struct drm_plane *plane, struct
> drm_plane_state *old_state)
> {
> struct sun8i_ui_layer *layer = plane_to_sun8i_ui_layer(plane);
> - unsigned int old_zpos = old_state->normalized_zpos;
> struct sun8i_mixer *mixer = layer->mixer;
>
> - sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
false, 0,
> - old_zpos);
> + sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay, false,
0);
> }
>
> static void sun8i_ui_layer_atomic_update(struct drm_plane *plane,
> @@ -277,12 +248,11 @@ static void sun8i_ui_layer_atomic_update(struct
> drm_plane *plane, {
> struct sun8i_ui_layer *layer = plane_to_sun8i_ui_layer(plane);
> unsigned int zpos = plane->state->normalized_zpos;
> - unsigned int old_zpos = old_state->normalized_zpos;
> struct sun8i_mixer *mixer = layer->mixer;
>
> if (!plane->state->visible) {
> sun8i_ui_layer_enable(mixer, layer->channel,
> - layer->overlay, false, 0,
old_zpos);
> + layer->overlay, false, 0);
> return;
> }
>
> @@ -293,7 +263,7 @@ static void sun8i_ui_layer_atomic_update(struct
> drm_plane *plane, sun8i_ui_layer_update_buffer(mixer, layer->channel,
> layer->overlay, plane);
> sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> - true, zpos, old_zpos);
> + true, zpos);
> }
>
> static struct drm_plane_helper_funcs sun8i_ui_layer_helper_funcs = {
> diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c index 42d445d23773..97cbc98bf781
> 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> @@ -17,8 +17,7 @@
> #include "sun8i_vi_scaler.h"
>
> static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int channel,
> - int overlay, bool enable,
unsigned int zpos,
> - unsigned int old_zpos)
> + int overlay, bool enable,
unsigned int zpos)
> {
> u32 val, bld_base, ch_base;
>
> @@ -37,32 +36,7 @@ static void sun8i_vi_layer_enable(struct sun8i_mixer

You should remove bld_base in this function too, now that it's not used
anymore.

Best regards,
Jernej

> *mixer, int channel, SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base, overlay),
> SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN, val);
>
> - if (!enable || zpos != old_zpos) {
> - regmap_update_bits(mixer->engine.regs,
> -
SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> -
SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
> - 0);
> -
> - regmap_update_bits(mixer->engine.regs,
> -
SUN8I_MIXER_BLEND_ROUTE(bld_base),
> -
SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
> - 0);
> - }
> -
> - if (enable) {
> - val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
> -
> - regmap_update_bits(mixer->engine.regs,
> -
SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> - val, val);
> -
> - val = channel <<
SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(zpos);
> -
> - regmap_update_bits(mixer->engine.regs,
> -
SUN8I_MIXER_BLEND_ROUTE(bld_base),
> -
SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(zpos),
> - val);
> - }
> + mixer->channel_zpos[channel] = enable ? zpos : -1;
> }
>
> static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int
> channel, @@ -350,11 +324,9 @@ static void
> sun8i_vi_layer_atomic_disable(struct drm_plane *plane, struct
> drm_plane_state *old_state)
> {
> struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane);
> - unsigned int old_zpos = old_state->normalized_zpos;
> struct sun8i_mixer *mixer = layer->mixer;
>
> - sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
false, 0,
> - old_zpos);
> + sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay, false,
0);
> }
>
> static void sun8i_vi_layer_atomic_update(struct drm_plane *plane,
> @@ -362,12 +334,11 @@ static void sun8i_vi_layer_atomic_update(struct
> drm_plane *plane, {
> struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane);
> unsigned int zpos = plane->state->normalized_zpos;
> - unsigned int old_zpos = old_state->normalized_zpos;
> struct sun8i_mixer *mixer = layer->mixer;
>
> if (!plane->state->visible) {
> sun8i_vi_layer_enable(mixer, layer->channel,
> - layer->overlay, false, 0,
old_zpos);
> + layer->overlay, false, 0);
> return;
> }
>
> @@ -378,7 +349,7 @@ static void sun8i_vi_layer_atomic_update(struct
> drm_plane *plane, sun8i_vi_layer_update_buffer(mixer, layer->channel,
> layer->overlay, plane);
> sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> - true, zpos, old_zpos);
> + true, zpos);
> }
>
> static struct drm_plane_helper_funcs sun8i_vi_layer_helper_funcs = {

Next message: Namjae Jeon: "Re: [PATCH v8 08/13] exfat: add exfat cache"
Previous message: Namjae Jeon: "Re: [PATCH v8 01/13] exfat: add in-memory and on-disk structures and headers"
In reply to: Roman Stratiienko: "Re: [PATCH v2 1/4] drm/sun4i: Reimplement plane z position setting logic"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]