[PATCH] regulator: bd70528: Remove .set_ramp_delay for bd70528_ldo_ops
From: Axel Lin
Date: Tue Dec 31 2019 - 21:24:42 EST
The .set_ramp_delay should be for bd70528_buck_ops only.
Setting .set_ramp_delay for for bd70528_ldo_ops causes problem because
BD70528_MASK_BUCK_RAMP (0x10) overlaps with BD70528_MASK_LDO_VOLT (0x1f).
So setting ramp_delay for LDOs may change the voltage output, fix it.
Fixes: 99ea37bd1e7d ("regulator: bd70528: Support ROHM BD70528 regulator block")
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
drivers/regulator/bd70528-regulator.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c
index ec764022621f..5bf8a2dc5fe7 100644
--- a/drivers/regulator/bd70528-regulator.c
+++ b/drivers/regulator/bd70528-regulator.c
@@ -101,7 +101,6 @@ static const struct regulator_ops bd70528_ldo_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_ramp_delay = bd70528_set_ramp_delay,
};
static const struct regulator_ops bd70528_led_ops = {
--
2.20.1