[PATCH] arm64: dts: imx8mm: Add UART1 UART1_DCE_RTS/CTS pin's mux option #4

From: Michael Trimarchi
Date: Wed Jan 01 2020 - 11:34:49 EST

According to i.MX8MM reference manual Rev.2, 08/2019. According
to the manual the two pins has associated daisy chain so input
register and input value should be set too

Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index cffa8991880d..62d16b1d7c5b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -438,10 +438,12 @@
#define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1 0x1B4 0x41C 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x1B8 0x420 0x4F0 0x4 0x2
#define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2 0x1B8 0x420 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x1BC 0x424 0x4F0 0x4 0x2
#define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE 0x1BC 0x424 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0