Re: [PATCH v3 2/2] PCI: qcom: Add support for SDM845 PCIe controller

[Philipp Zabel]

On Wed, 2019-11-06 at 16:16 -0800, Bjorn Andersson wrote:
> The SDM845 has one Gen2 and one Gen3 controller, add support for these.
> 
> Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> 
> Changes since v1:
> - Don't assert the reset in the failure path
> 
>  drivers/pci/controller/dwc/pcie-qcom.c | 150 +++++++++++++++++++++++++
>  1 file changed, 150 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 7e581748ee9f..5ea527a6bd9f 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
[...]
> @@ -139,12 +142,20 @@ struct qcom_pcie_resources_2_3_3 {
>  	struct reset_control *rst[7];
>  };
>  
> +struct qcom_pcie_resources_2_7_0 {
> +	struct clk_bulk_data clks[6];
> +	struct regulator_bulk_data supplies[2];
> +	struct reset_control *pci_reset;
> +	struct clk *pipe_clk;
> +};
> +
>  union qcom_pcie_resources {
>  	struct qcom_pcie_resources_1_0_0 v1_0_0;
>  	struct qcom_pcie_resources_2_1_0 v2_1_0;
>  	struct qcom_pcie_resources_2_3_2 v2_3_2;
>  	struct qcom_pcie_resources_2_3_3 v2_3_3;
>  	struct qcom_pcie_resources_2_4_0 v2_4_0;
> +	struct qcom_pcie_resources_2_7_0 v2_7_0;
>  };
>  
>  struct qcom_pcie;
> @@ -1068,6 +1079,134 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
>  	return ret;
>  }
>  
> +static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
> +{
> +	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
> +	struct dw_pcie *pci = pcie->pci;
> +	struct device *dev = pci->dev;
> +	int ret;
> +
> +	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
> +	if (IS_ERR(res->pci_reset))
> +		return PTR_ERR(res->pci_reset);
> +
> +	res->supplies[0].supply = "vdda";
> +	res->supplies[1].supply = "vddpe-3v3";
> +	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies),
> +				      res->supplies);
> +	if (ret)
> +		return ret;
> +
> +	res->clks[0].id = "aux";
> +	res->clks[1].id = "cfg";
> +	res->clks[2].id = "bus_master";
> +	res->clks[3].id = "bus_slave";
> +	res->clks[4].id = "slave_q2a";
> +	res->clks[5].id = "tbu";
> +
> +	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks);
> +	if (ret < 0)
> +		return ret;
> +
> +	res->pipe_clk = devm_clk_get(dev, "pipe");
> +	return PTR_ERR_OR_ZERO(res->pipe_clk);
> +}
> +
> +static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
> +{
> +	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
> +	struct dw_pcie *pci = pcie->pci;
> +	struct device *dev = pci->dev;
> +	u32 val;
> +	int ret;
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "cannot enable regulators\n");
> +		return ret;
> +	}
> +
> +	ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
> +	if (ret < 0)
> +		goto err_disable_regulators;
> +
> +	ret = reset_control_assert(res->pci_reset);
> +	if (ret < 0) {
> +		dev_err(dev, "cannot deassert pci reset\n");

s/deassert/assert/

in the error message. Apart from that,

Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>

regards
Philipp