[PATCH v3 2/2] ARM: dts: Add omap3-echo

From: AndrÃ Hentschel
Date: Thu Jan 02 2020 - 16:43:21 EST

Next message: Pavel Machek: "leds: lm3642: remove warnings for bad strtol, cleanup gotos"
Previous message: AndrÃ Hentschel: "[PATCH v3 1/2] ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725"
In reply to: AndrÃ Hentschel: "[PATCH v3 1/2] ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This is the first generation Amazon Echo from 2016.
Audio support is not yet implemented.

Signed-off-by: AndrÃ Hentschel <nerv@xxxxxxxxxxx>
---

v2: Don't disable sgx, as the previous patch changes dtsi files accordingly
v3: Include dm3725.dtsi

I have local patches for the microphone array, but cleaning that up will take some time.
Audio output seems to be even harder work...
You can find a tutorial on how to boot the Echo here:
https://labs.f-secure.com/archive/alexa-are-you-listening/

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap3-echo.dts | 462 +++++++++++++++++++++++++++++++
2 files changed, 463 insertions(+)
create mode 100644 arch/arm/boot/dts/omap3-echo.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b21b3a64641a..923dabc09203 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -685,6 +685,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-devkit8000.dtb \
omap3-devkit8000-lcd43.dtb \
omap3-devkit8000-lcd70.dtb \
+ omap3-echo.dtb \
omap3-evm.dtb \
omap3-evm-37xx.dtb \
omap3-gta04a3.dtb \
diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
new file mode 100644
index 000000000000..f892e85d0ffc
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -0,0 +1,462 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 AndrÃ Hentschel <nerv@xxxxxxxxxxx>
+ */
+/dts-v1/;
+
+#include "dm3725.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Amazon Echo (first generation)";
+ compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0xc600000>; /* 198 MB */
+ };
+
+ vcc5v: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc3v3: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc1v8: fixedregulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <40>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+
+ mute-button {
+ label = "mute";
+ linux,code = <KEY_MUTE>;
+ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; /* GPIO_70 */
+ wakeup-source;
+ };
+
+ help-button {
+ label = "help";
+ linux,code = <KEY_HELP>;
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; /* GPIO_72 */
+ wakeup-source;
+ };
+ };
+
+ rotary: rotary-encoder {
+ compatible = "rotary-encoder";
+ gpios = <
+ &gpio3 5 GPIO_ACTIVE_HIGH /* GPIO_69 */
+ &gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */
+ >;
+ linux,axis = <REL_X>;
+ rotary-encoder,relative-axis;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ lp5523A: lp5523A@32 {
+ compatible = "national,lp5523";
+ label = "q1";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+ enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+
+ chan0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ };
+
+ lp5523B: lp5523B@33 {
+ compatible = "national,lp5523";
+ label = "q3";
+ reg = <0x33>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+ chan0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ };
+
+ lp5523C: lp5523C@34 {
+ compatible = "national,lp5523";
+ label = "q4";
+ reg = <0x34>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+ chan0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ };
+
+ lp5523D: lp552D@35 {
+ compatible = "national,lp5523";
+ label = "q2";
+ reg = <0x35>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+ chan0 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan3 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan4 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan5 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan6 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan7 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ chan8 {
+ led-cur = /bits/ 8 <12>;
+ max-cur = /bits/ 8 <15>;
+ };
+ };
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+ tps_pins: pinmux_tps_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ >;
+ };
+};
+
+&mmc1 {
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc2 {
+ status = "okay";
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc3 {
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ non-removable;
+ disable-wp;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ vmmc-supply = <&vcc3v3>;
+ vqmmc-supply = <&vcc1v8>;
+};
+
+
+&tps {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps_pins>;
+
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ ti,en-ck32k-xtal;
+ ti,system-power-controller;
+
+ vcc1-supply = <&vcc5v>;
+ vcc2-supply = <&vcc5v>;
+ vcc3-supply = <&vcc5v>;
+ vcc4-supply = <&vcc5v>;
+ vcc5-supply = <&vcc5v>;
+ vcc6-supply = <&vcc5v>;
+ vcc7-supply = <&vcc5v>;
+ vccio-supply = <&vcc5v>;
+
+ regulators {
+
+ vio_reg: regulator@1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ regulator-name = "vdd_dsp";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+};
--
2.17.1

Next message: Pavel Machek: "leds: lm3642: remove warnings for bad strtol, cleanup gotos"
Previous message: AndrÃ Hentschel: "[PATCH v3 1/2] ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725"
In reply to: AndrÃ Hentschel: "[PATCH v3 1/2] ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]