Re: [RESEND PATCH v6 01/17] dt-bindings: mediatek: add rdma_fifo_size description for mt8183 display

[CK Hu]

Hi, Yongqiang:

On Fri, 2020-01-03 at 11:12 +0800, Yongqiang Niu wrote:
> Update device tree binding documention for rdma_fifo_size
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/display/mediatek/mediatek,disp.txt  | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> index 681502e..34bef44 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> @@ -70,6 +70,10 @@ Required properties (DMA function blocks):
>    argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
>    for details.
>  
> +Required properties (DMA function blocks):
> +- mediatek,rdma_fifo_size: rdma fifo size may be different even in same SOC, add this
> +  property to the corresponding rdma

I think "mediatek,rdma_fifo_size" is not a 'required' property. In
mt8173.dtsi [1], there is no mediatek,rdma_fifo_size in rdma0, rdma1,
and rdma2. So I think you should move this to 'optional' property.

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/mediatek/mt8173.dtsi?h=v5.5-rc4

Regards,
CK

> +
>  Examples:
>  
>  mmsys: clock-controller@14000000 {
> @@ -211,3 +215,12 @@ od@14023000 {
>  	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>  	clocks = <&mmsys CLK_MM_DISP_OD>;
>  };
> +
> +rdma1: rdma@1400c000 {
> +	compatible = "mediatek,mt8183-disp-rdma";
> +	reg = <0 0x1400c000 0 0x1000>;
> +	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
> +	power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> +	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> +	mediatek,rdma_fifo_size = <2048>;
> +};
> \ No newline at end of file