[PATCH v4 0/6] leds: lm3692x: Allow to set ovp and brigthness mode

[Guido GÃnther]

Overvoltage protection and brightness mode are currently hardcoded
as 29V and disabled in the driver. Make these configurable via DT.

This v4 moves the exponential brightness mode to the back of the series
as per Pavel's request:

  20200106103233.GA32426@amd/T/#m93270a9bf10b88e060f4e4cf5701c527476de985">https://lore.kernel.org/linux-next/20200106103233.GA32426@amd/T/#m93270a9bf10b88e060f4e4cf5701c527476de985

The end result is identical and i've tested everything still works when
dropping the last to patches and checked compiltion via

  git rebase -i ... -exec 'make ... Image dtbs'

Patches are against linux-leds-next.

Changes from v3
- Move exponential mode patches to the back of the series
  20200106103233.GA32426@amd/T/#m93270a9bf10b88e060f4e4cf5701c527476de985">https://lore.kernel.org/linux-next/20200106103233.GA32426@amd/T/#m93270a9bf10b88e060f4e4cf5701c527476de985
- Add Rob's Reviewed-by:, thanks!

Changes from v2
- As per review comment from Pavel Machek
  https://lore.kernel.org/linux-leds/20191226100615.GA4033@amd/T/#u
  - Use default value in DT example
  https://lore.kernel.org/linux-leds/20191226100842.GC4033@amd/T/#u
  - Use uppercase LED in commit message
  https://lore.kernel.org/linux-leds/20191226101336.GD4033@amd/T/#u
  - Fix typo in commit message
  - Use correct return value when checking if property is present
  - Fold in
    https://lore.kernel.org/linux-leds/20191226101419.GE4033@amd/T/#t
- Add Acked-By's from Pavel Machek, thanks!

Changes from v1
- As per review comments by Dan Murphy
  https://lore.kernel.org/linux-leds/3d66b07d-b4c5-43e6-4378-d63cc84b8d43@xxxxxx/
  - Split commits per propoerty
  - Add new properties to DT example too
  - Drop dev_dbg() statements
  - ovp: fix 21V value parsing
  - ovp: Set correct default value if DT parsing fails
- As per review comments by Pavel Machek
  https://lore.kernel.org/linux-leds/20191221191515.GF32732@amd/
  - Fix defaults (which is 29V)
  - Use uV as Unit for ovp property
- Change property name to 'ti,ovp-microvolt' to make it shorter
- Honor led-max-microamp to not exceed the maximum led current

Guido GÃnther (6):
  leds: lm3692x: Make sure we don't exceed the maximum led current
  leds: lm3692x: Move lm3692x_init and rename to lm3692x_leds_enable
  leds: lm3692x: Split out lm3692x_leds_disable
  leds: lm3692x: Disable chip on brightness 0
  dt: bindings: lm3692x: Add ti,brightness-mapping-exponential property
  leds: lm3692x: Allow to configure brigthness mode

 .../devicetree/bindings/leds/leds-lm3692x.txt |   3 +
 drivers/leds/leds-lm3692x.c                   | 165 ++++++++++++------
 2 files changed, 113 insertions(+), 55 deletions(-)

-- 
2.23.0