Re: [PATCH v3 5/6] drm: atmel-hlcdc: prefer a lower pixel-clock than requested

From: Sam Ravnborg
Date: Mon Jan 06 2020 - 14:02:43 EST


Hi Claudiu.
On Mon, Jan 06, 2020 at 09:25:40AM +0000, Claudiu.Beznea@xxxxxxxxxxxxx wrote:
>
>
> On 04.01.2020 19:12, Sam Ravnborg wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> >
> > Hi Claudiu
> >
> > On Thu, Jan 02, 2020 at 10:08:48AM +0100, Sam Ravnborg wrote:
> >> On Wed, Dec 18, 2019 at 02:28:28PM +0200, Claudiu Beznea wrote:
> >>> From: Peter Rosin <peda@xxxxxxxxxx>
> >>>
> >>> The intention was to only select a higher pixel-clock rate than the
> >>> requested, if a slight overclocking would result in a rate significantly
> >>> closer to the requested rate than if the conservative lower pixel-clock
> >>> rate is selected. The fixed patch has the logic the other way around and
> >>> actually prefers the higher frequency. Fix that.
> >>>
> >>> Fixes: f6f7ad323461 ("drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested")
> >> The id is wrong here - the right one is: 9946a3a9dbedaaacef8b7e94f6ac144f1daaf1de
> >> The wrong id above was used before - so I think it is a copy'n'paste
> >> thing.
> >>
> >> Hint: try "dim fixes 9946a3a9dbedaaacef8b7e94f6ac144f1daaf1de"
> >>
> >> If I get a quick response from Lee I can fix it up while applying.
> >>
> >> Sam
> >>
> >>> Reported-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> >>> Tested-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> >>> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
> >
> > One other detail.
> > The patch has passed through your hands, so you have to add your s-o-b
> > to document this.
> > The chain of s-o-b shall document the path the patch has taken towards
> > the kernel.
> >
> > In this case:
> > Peter => Claudiu => Sam => Applied.
> >
> > Please resend or reply where you say OK that I add your s-o-b.
>
> Sure! Please add my Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

Thanks - all four DRM patches pushed to drm-misc-next.
I used "dim fixes" so we could Cc relevant stable versions.

Sam