Re: [PATCH v6 00/19] Move PMC clocks into Tegra PMC driver

[Dmitry Osipenko]

Hello Sowjanya,

07.01.2020 07:13, Sowjanya Komatineni ÐÐÑÐÑ:
> This patch series moves Tegra PMC clocks from clock driver to pmc driver
> along with the device trees changes and audio driver which uses one of
> the pmc clock for audio mclk.
> 
> Tegra PMC has clk_out_1, clk_out_2, clk_out_3 and blink controls which
> are currently registered by Tegra clock driver using clk_regiser_mux and
> clk_register_gate which performs direct Tegra PMC register access.
> 
> When Tegra PMC is in secure mode, any access from non-secure world will
> not go through.
> 
> This patch series adds these Tegra PMC clocks and blink controls to Tegra
> PMC driver with PMC as clock provider and removes them from Tegra clock
> driver.
> 
> PMC clock clk_out_1 is dedicated for audio mclk from Tegra30 thru Tegra210
> and clock driver does inital parent configuration for it and enables them.
> But this clock should be taken care by audio driver as there is no need
> to have this clock pre enabled.
> 
> So, this series also includes patch that updates ASoC driver to take
> care of parent configuration for mclk if device tree don't specify
> initial parent configuration using assigned-clock-parents and controls
> audio mclk enable/disable during ASoC machine startup and shutdown.
> 
> DTs are also updated to use clk_out_1 as audio mclk rather than extern1.
> 
> This series also includes a patch for mclk fallback to extern1 when
> retrieving mclk fails to have this backward compatible of new DT with
> old kernels.
> 
> [v6]:	Changes between v5 and v6 are
> 	- v5 feedback
> 	- Added ASoC machine startup and shutdown callbacks to control audio
> 	  mclk enable/disable and removed default mclk enable from clock driver.
> 	- Updated tegra_asoc_utils_set_rate to disable mclk only during PLLA
> 	  rate change and removed disabling PLLA as its already taken care by
> 	  pll clock driver.
> 	- Removed tegra_asoc_utils_set_rate call from utils_init as set_rate
> 	  is set during machine hw_params and during utils_init mclk is
> 	  already in disabled state and this causes warning during mclk disable
> 	  in utils_set_rate.
> 
> [v5]:	Changes between v4 and v5 are
> 	- v4 feedback
> 	- updated dt-binding pmc YAML schema with more description on power
> 	  gate nodes and pad configuration state nodes.
> 	- update tegra_asoc_utils_set_rate to disable audio mclk only if
> 	  its in enable state.
> 
> [v4]:	Changes between v3 and v4 are
> 	- v3 Feedback
> 	- Updated clocks clk_m_div2 and clk_m_div4 as osc_div2 and osc_div4.
> 	  Tegra don't have clk_m_div2, clk_m_div4 and they should actually
> 	  be osc_div2 and osc_div4 clocks from osc pads.
> 	- Fixed PMC clock parents to use osc, osc_div2, osc_div4.
> 	- Register each PMC clock as single clock rather than separate
> 	  mux and gate clocks.
> 	- Update ASoC utils to use resource managed APIs rather than
> 	  using clk_get and clk_put.
> 	- Updated device tree and ASoC driver to use clk_out_1 instead of
> 	  clk_out_1_mux as PMC clocks are registered as single clock.
> 	- Update clock driver init_table to not enable audio related clocks
> 	  as ASoC utils will do audio clock enables.
> 
> [v3]:	Changes between v2 and v3 are
> 	- Removes set parent of clk_out_1_mux to extern1 and enabling
> 	  extern1 from the clock driver.
> 	- Doesn't enable clk_out_1 and blink by default in pmc driver
> 	- Updates ASoC driver to take care of audio mclk parent
> 	  configuration incase if device tree don't specify assigned
> 	  clock parent properties and enables mclk using both clk_out_1
> 	  and extern1.
> 	- updates all device trees using extern1 as mclk in sound node
> 	  to use clk_out_1 from pmc.
> 	- patch for YAML format pmc dt-binding
> 	- Includes v2 feedback
> 
> [v2]:	Changes between v1 and v2 are
> 	- v2 includes patches for adding clk_out_1, clk_out_2, clk_out_3,
> 	  blink controls to Tegra PMC driver and removing clk-tegra-pmc.
> 	- feedback related to pmc clocks in Tegra PMC driver from v1
> 	- Removed patches for WB0 PLLM overrides and PLLE IDDQ PMC programming
> 	  by the clock driver using helper functions from Tegra PMC.
> 
>  	  Note:
> 	  To use helper functions from PMC driver, PMC early init need to
> 	  happen prior to using helper functions and these helper functions are
> 	  for PLLM Override and PLLE IDDQ programming in PMC during PLLM/PLLE
> 	  clock registration which happen in clock_init prior to Tegra PMC
> 	  probe.
> 	  Moving PLLM/PLLE clocks registration to happen after Tegra PMC
> 	  impacts other clocks EMC, MC and corresponding tegra_emc_init and
> 	  tegra_mc_init.
> 	  This implementation of configuring PMC registers thru helper
> 	  functions in clock driver needs proper changes across PMC, Clock,
> 	  EMC and MC inits to have it work across all Tegra platforms.
> 
> 	  Currently PLLM Override is not enabled in the bootloader so proper
> 	  patches for this fix will be taken care separately.
> 
> [v1]:	v1 includes patches for below fixes.
> 	- adding clk_out_1, clk_out_2, clk_out_3, blink controls to Tegra PMC
> 	  driver and removing clk-tegra-pmc.
> 	- updated clock provider from tegra_car to pmc in the device tree
> 	  tegra210-smaug.dts that uses clk_out_2.
> 	- Added helper functions in PMC driver for WB0 PLLM overrides and PLLE
> 	  IDDQ programming to use by clock driver and updated clock driver to
> 	  use these helper functions and removed direct PMC access from clock
> 	  driver and all pmc base address references in clock driver.
> 
> 
> 
> 
> Sowjanya Komatineni (19):
>   dt-bindings: clock: tegra: Change CLK_M_DIV to OSC_DIV clocks
>   clk: tegra: Change CLK_M_DIV clocks to OSC_DIV clocks
>   clk: tegra: Fix Tegra PMC clock out parents
>   dt-bindings: tegra: Convert Tegra PMC bindings to YAML
>   dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings
>   soc: tegra: Add Tegra PMC clocks registration into PMC driver
>   dt-bindings: soc: tegra-pmc: Add id for Tegra PMC 32KHz blink clock
>   soc: tegra: Add support for 32KHz blink clock
>   clk: tegra: Remove tegra_pmc_clk_init along with clk ids
>   dt-bindings: clock: tegra: Remove pmc clock ids from clock dt-bindings
>   ASoC: tegra: Use device managed resource APIs to get the clock
>   ASoC: tegra: Add audio mclk configuration
>   ASoC: tegra: Add fallback implementation for audio mclk
>   clk: tegra: Remove audio related clock enables from init_table
>   ARM: dts: tegra: Add clock-cells property to pmc
>   arm64: tegra: Add clock-cells property to Tegra PMC node
>   ARM: tegra: Update sound node clocks in device tree
>   arm64: tegra: smaug: Change clk_out_2 provider to pmc
>   ASoC: nau8825: change Tegra clk_out_2 provider from tegra_car to pmc
> 
>  .../bindings/arm/tegra/nvidia,tegra20-pmc.txt      | 300 -----------------
>  .../bindings/arm/tegra/nvidia,tegra20-pmc.yaml     | 354 +++++++++++++++++++++
>  .../devicetree/bindings/sound/nau8825.txt          |   2 +-
>  arch/arm/boot/dts/tegra114-dalmore.dts             |   8 +-
>  arch/arm/boot/dts/tegra114.dtsi                    |   4 +-
>  arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi        |   8 +-
>  arch/arm/boot/dts/tegra124-apalis.dtsi             |   8 +-
>  arch/arm/boot/dts/tegra124-jetson-tk1.dts          |   8 +-
>  arch/arm/boot/dts/tegra124-nyan.dtsi               |   8 +-
>  arch/arm/boot/dts/tegra124-venice2.dts             |   8 +-
>  arch/arm/boot/dts/tegra124.dtsi                    |   4 +-
>  arch/arm/boot/dts/tegra20.dtsi                     |   4 +-
>  arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi         |   8 +-
>  arch/arm/boot/dts/tegra30-apalis.dtsi              |   8 +-
>  arch/arm/boot/dts/tegra30-beaver.dts               |   8 +-
>  arch/arm/boot/dts/tegra30-cardhu.dtsi              |   8 +-
>  arch/arm/boot/dts/tegra30-colibri.dtsi             |   8 +-
>  arch/arm/boot/dts/tegra30.dtsi                     |   4 +-
>  arch/arm64/boot/dts/nvidia/tegra132.dtsi           |   4 +-
>  arch/arm64/boot/dts/nvidia/tegra210-smaug.dts      |   2 +-
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi           |   6 +-
>  drivers/clk/tegra/Makefile                         |   1 -
>  drivers/clk/tegra/clk-id.h                         |  11 +-
>  drivers/clk/tegra/clk-tegra-fixed.c                |  32 +-
>  drivers/clk/tegra/clk-tegra-pmc.c                  | 122 -------
>  drivers/clk/tegra/clk-tegra114.c                   |  41 +--
>  drivers/clk/tegra/clk-tegra124.c                   |  46 +--
>  drivers/clk/tegra/clk-tegra20.c                    |   9 +-
>  drivers/clk/tegra/clk-tegra210.c                   |  30 +-
>  drivers/clk/tegra/clk-tegra30.c                    |  31 +-
>  drivers/clk/tegra/clk.h                            |   1 -
>  drivers/soc/tegra/pmc.c                            | 352 ++++++++++++++++++++
>  include/dt-bindings/clock/tegra114-car.h           |  18 +-
>  include/dt-bindings/clock/tegra124-car-common.h    |  18 +-
>  include/dt-bindings/clock/tegra20-car.h            |   2 +-
>  include/dt-bindings/clock/tegra210-car.h           |  18 +-
>  include/dt-bindings/clock/tegra30-car.h            |  18 +-
>  include/dt-bindings/soc/tegra-pmc.h                |  16 +
>  sound/soc/tegra/tegra_alc5632.c                    |  28 +-
>  sound/soc/tegra/tegra_asoc_utils.c                 | 125 ++++----
>  sound/soc/tegra/tegra_asoc_utils.h                 |   3 +-
>  sound/soc/tegra/tegra_max98090.c                   |  43 ++-
>  sound/soc/tegra/tegra_rt5640.c                     |  43 ++-
>  sound/soc/tegra/tegra_rt5677.c                     |  28 +-
>  sound/soc/tegra/tegra_sgtl5000.c                   |  28 +-
>  sound/soc/tegra/tegra_wm8753.c                     |  43 ++-
>  sound/soc/tegra/tegra_wm8903.c                     |  43 ++-
>  sound/soc/tegra/tegra_wm9712.c                     |   8 +-
>  sound/soc/tegra/trimslice.c                        |  39 ++-
>  49 files changed, 1192 insertions(+), 777 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
>  create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
>  delete mode 100644 drivers/clk/tegra/clk-tegra-pmc.c
>  create mode 100644 include/dt-bindings/soc/tegra-pmc.h
> 

I briefly looked through the patches and tested them in all possible
configurations. For now everything looks and works well.

You could add this to all patches:

Tested-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Reviewed-by: Dmitry Osipenko <digetx@xxxxxxxxx>