Re: [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()

From: Fabrice Gasnier
Date: Thu Jan 09 2020 - 04:13:24 EST


On 1/7/20 12:45 PM, Peter Ujfalusi wrote:
> dma_request_slave_channel() is a wrapper on top of dma_request_chan()
> eating up the error code.
>
> By using dma_request_chan() directly the driver can support deferred
> probing against DMA.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> ---
> Hi,
>
> Changes since v1:
> - Fall back to IRQ mode for ADC only in case of ENODEV

Hi Peter,

Thanks for the patch,

Please find a minor comment here after. Apart from that, you can add my:

Acked-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>


>
> Regards,
> Peter
>
> drivers/iio/adc/stm32-dfsdm-adc.c | 21 +++++++++++++++++----
> 1 file changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
> index e493242c266e..74a2211bdff4 100644
> --- a/drivers/iio/adc/stm32-dfsdm-adc.c
> +++ b/drivers/iio/adc/stm32-dfsdm-adc.c
> @@ -1383,9 +1383,13 @@ static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
> {
> struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
>
> - adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
> - if (!adc->dma_chan)
> - return -EINVAL;
> + adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
> + if (IS_ERR(adc->dma_chan)) {
> + int ret = PTR_ERR(adc->dma_chan);
> +
> + adc->dma_chan = NULL;
> + return ret;

You may "return PTR_ERR(adc->dma_chan);" directly here.

Best Regards,
Fabrice

> + }
>
> adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev,
> DFSDM_DMA_BUFFER_SIZE,
> @@ -1509,7 +1513,16 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
> init_completion(&adc->completion);
>
> /* Optionally request DMA */
> - if (stm32_dfsdm_dma_request(indio_dev)) {
> + ret = stm32_dfsdm_dma_request(indio_dev);
> + if (ret) {
> + if (ret != -ENODEV) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(&indio_dev->dev,
> + "DMA channel request failed with %d\n",
> + ret);
> + return ret;
> + }
> +
> dev_dbg(&indio_dev->dev, "No DMA support\n");
> return 0;
> }
>