Re: [PATCH v3] Bluetooth: hci_qca: Add qca_power_on() API to support both wcn399x and Rome power up

[Matthias Kaehlcke]

Hi Rocky,

On Thu, Jan 09, 2020 at 01:14:27PM +0800, Rocky Liao wrote:
> This patch adds a unified API qca_power_on() to support both wcn399x and
> Rome power on. For wcn399x it calls the qca_wcn3990_init() to init the
> regulators, and for Rome it pulls up the bt_en GPIO to power up the btsoc.
> It also moves all the power up operation from hdev->open() to
> hdev->setup().
> 
> Signed-off-by: Rocky Liao <rjliao@xxxxxxxxxxxxxx>
> ---
> 
> Changes in v2: None
> Changes in v3:
>   -combined the changes of patch 2 and 3 into this patch

it would be better to actually describe what was done, "patch 2 and 3"
doesn't provide much useful information.

>   -updated the commit message
> 
>  drivers/bluetooth/hci_qca.c | 46 ++++++++++++++++++++++++-------------
>  1 file changed, 30 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 82e4cd4b6663..427e381a08b4 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -541,7 +541,6 @@ static int qca_open(struct hci_uart *hu)
>  {
>  	struct qca_serdev *qcadev;
>  	struct qca_data *qca;
> -	int ret;
>  
>  	BT_DBG("hu %p qca_open", hu);
>  
> @@ -582,23 +581,10 @@ static int qca_open(struct hci_uart *hu)
>  	hu->priv = qca;
>  
>  	if (hu->serdev) {
> -
>  		qcadev = serdev_device_get_drvdata(hu->serdev);
> -		if (!qca_is_wcn399x(qcadev->btsoc_type)) {
> -			gpiod_set_value_cansleep(qcadev->bt_en, 1);
> -			/* Controller needs time to bootup. */
> -			msleep(150);
> -		} else {
> +		if (qca_is_wcn399x(qcadev->btsoc_type)) {
>  			hu->init_speed = qcadev->init_speed;
>  			hu->oper_speed = qcadev->oper_speed;
> -			ret = qca_regulator_enable(qcadev);
> -			if (ret) {
> -				destroy_workqueue(qca->workqueue);
> -				kfree_skb(qca->rx_skb);
> -				hu->priv = NULL;
> -				kfree(qca);
> -				return ret;
> -			}
>  		}
>  	}
>  
> @@ -1531,6 +1517,31 @@ static int qca_wcn3990_init(struct hci_uart *hu)
>  	return 0;
>  }
>  
> +static int qca_power_on(struct hci_dev *hdev)
> +{
> +	struct hci_uart *hu = hci_get_drvdata(hdev);
> +	enum qca_btsoc_type soc_type = qca_soc_type(hu);
> +	struct qca_serdev *qcadev;
> +	int ret = 0;
> +
> +	/* Non-serdev device usually is powered by external power
> +	 * and don't need additional action in driver for power on
> +	 */
> +	if (!hu->serdev)
> +		return 0;
> +
> +	if (qca_is_wcn399x(soc_type)) {
> +		ret = qca_wcn3990_init(hu);

Since there is no real need to add the qca_regulator_enable() call from
qca_open() here qca_power_on() is now essentially a fancy wrapper for
qca_wcn3990_init(), but I guess that's ok.

> +	} else {
> +		qcadev = serdev_device_get_drvdata(hu->serdev);
> +		gpiod_set_value_cansleep(qcadev->bt_en, 1);
> +		/* Controller needs time to bootup. */
> +		msleep(150);
> +	}
> +
> +	return ret;
> +}
> +
>  static int qca_setup(struct hci_uart *hu)
>  {
>  	struct hci_dev *hdev = hu->hdev;
> @@ -1562,7 +1573,7 @@ static int qca_setup(struct hci_uart *hu)
>  		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
>  		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
>  		hu->hdev->shutdown = qca_power_off;
> -		ret = qca_wcn3990_init(hu);
> +		ret = qca_power_on(hdev);
>  		if (ret)
>  			return ret;
>  
> @@ -1571,6 +1582,9 @@ static int qca_setup(struct hci_uart *hu)
>  			return ret;
>  	} else {
>  		bt_dev_info(hdev, "ROME setup");
> +		ret = qca_power_on(hdev);
> +		if (ret)
> +			return ret;
>  		qca_set_speed(hu, QCA_INIT_SPEED);
>  	}

It would be nice if we could get away with a single qca_power_on() call
for WCN399x and ROME. How about this before 'if (qca_is_wcn399x(soc_type))':

	bt_dev_info(hdev, "setting up %s",
		qca_is_wcn399x(soc_type)? "wcn399x" : "ROME");

	ret = qca_power_on(hdev);
	if (ret)
		return ret;


In any case:

Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>