[PATCH v2] ARM: dts: at91: sama5d3: switch to new clock bindings
From: Alexandre Belloni
Date: Fri Jan 10 2020 - 17:28:11 EST
Switch sama5d3 boards to the new PMC clock bindings.
This prevents the wb50n to use the out of spec rate for USART1.
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
Changes in v2:
- rebased on top of the previous clock range fixes (resulting files ares the
same)
arch/arm/boot/dts/at91-dvk_su60_somc.dtsi | 2 +-
arch/arm/boot/dts/at91-wb50n.dtsi | 4 -
arch/arm/boot/dts/sama5d3.dtsi | 424 ++--------------------
arch/arm/boot/dts/sama5d3_can.dtsi | 20 +-
arch/arm/boot/dts/sama5d3_emac.dtsi | 8 +-
arch/arm/boot/dts/sama5d3_gmac.dtsi | 11 +-
arch/arm/boot/dts/sama5d3_lcd.dtsi | 19 +-
arch/arm/boot/dts/sama5d3_mci2.dtsi | 11 +-
arch/arm/boot/dts/sama5d3_tcb1.dtsi | 12 +-
arch/arm/boot/dts/sama5d3_uart.dtsi | 20 +-
arch/arm/boot/dts/sama5d3xmb.dtsi | 6 +-
arch/arm/boot/dts/sama5d3xmb_cmp.dtsi | 6 +-
12 files changed, 56 insertions(+), 487 deletions(-)
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
index 21876da7c442..c1c8650dafce 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -62,7 +62,7 @@ &i2c0 {
wm8904: wm8904@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
- clocks = <&pck2>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 10>;
clock-names = "mclk";
};
};
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
index 4ed8500a5cb8..1487b893cfa7 100644
--- a/arch/arm/boot/dts/at91-wb50n.dtsi
+++ b/arch/arm/boot/dts/at91-wb50n.dtsi
@@ -46,10 +46,6 @@ &clk32k {
atmel,osc-bypass;
};
-&usart1_clk {
- atmel,clk-output-range = <0 132000000>;
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 203d40be70a5..2e983babab4f 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -108,7 +108,7 @@ mmc0: mmc@f0000000 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
clock-names = "mci_clk";
};
@@ -123,7 +123,7 @@ spi0: spi@f0004000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -137,7 +137,7 @@ ssc0: ssc@f0008000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
clock-names = "pclk";
status = "disabled";
};
@@ -148,7 +148,7 @@ tcb0: timer@f0010000 {
#size-cells = <0>;
reg = <0xf0010000 0x100>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -163,7 +163,7 @@ i2c0: i2c@f0014000 {
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
status = "disabled";
};
@@ -178,7 +178,7 @@ i2c1: i2c@f0018000 {
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
status = "disabled";
};
@@ -191,7 +191,7 @@ usart0: serial@f001c000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "usart";
status = "disabled";
};
@@ -205,7 +205,7 @@ usart1: serial@f0020000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "usart";
status = "disabled";
};
@@ -216,7 +216,7 @@ uart0: serial@f0024000 {
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "usart";
status = "disabled";
};
@@ -226,7 +226,7 @@ pwm0: pwm@f002c000 {
reg = <0xf002c000 0x300>;
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
status = "disabled";
};
@@ -236,7 +236,7 @@ isi: isi@f0034000 {
interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi_data_0_7>;
- clocks = <&isi_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
clock-names = "isi_clk";
status = "disabled";
port {
@@ -261,7 +261,7 @@ mmc1: mmc@f8000000 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "mci_clk";
};
@@ -276,7 +276,7 @@ spi1: spi@f8008000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -290,7 +290,7 @@ ssc1: ssc@f800c000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
- clocks = <&ssc1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
clock-names = "pclk";
status = "disabled";
};
@@ -317,7 +317,7 @@ &pinctrl_adc0_ad9
&pinctrl_adc0_ad10
&pinctrl_adc0_ad11
>;
- clocks = <&adc_clk>,
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0xfff>;
@@ -361,7 +361,7 @@ i2c2: i2c@f801c000 {
pinctrl-0 = <&pinctrl_i2c2>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
status = "disabled";
};
@@ -374,7 +374,7 @@ usart2: serial@f8020000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "usart";
status = "disabled";
};
@@ -388,7 +388,7 @@ usart3: serial@f8024000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "usart";
status = "disabled";
};
@@ -399,7 +399,7 @@ sha@f8034000 {
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
dma-names = "tx";
- clocks = <&sha_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
clock-names = "sha_clk";
};
@@ -410,7 +410,7 @@ aes@f8038000 {
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
<&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
dma-names = "tx", "rx";
- clocks = <&aes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
clock-names = "aes_clk";
};
@@ -421,7 +421,7 @@ tdes@f803c000 {
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
<&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
dma-names = "tx", "rx";
- clocks = <&tdes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
clock-names = "tdes_clk";
};
@@ -429,14 +429,14 @@ trng@f8040000 {
compatible = "atmel,at91sam9g45-trng";
reg = <0xf8040000 0x100>;
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&trng_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
};
hsmc: hsmc@ffffc000 {
compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
reg = <0xffffc000 0x1000>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -453,7 +453,7 @@ dma0: dma-controller@ffffe600 {
reg = <0xffffe600 0x200>;
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
clock-names = "dma_clk";
};
@@ -462,14 +462,14 @@ dma1: dma-controller@ffffe800 {
reg = <0xffffe800 0x200>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
clock-names = "dma_clk";
};
ramc0: ramc@ffffea00 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xffffea00 0x200>;
- clocks = <&ddrck>, <&mpddr_clk>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
clock-names = "ddrck", "mpddr";
};
@@ -482,7 +482,7 @@ dbgu: serial@ffffee00 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&dbgu_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
clock-names = "usart";
status = "disabled";
};
@@ -940,7 +940,7 @@ pioA: gpio@fffff200 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
};
pioB: gpio@fffff400 {
@@ -951,7 +951,7 @@ pioB: gpio@fffff400 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
};
pioC: gpio@fffff600 {
@@ -962,7 +962,7 @@ pioC: gpio@fffff600 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioC_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
};
pioD: gpio@fffff800 {
@@ -973,7 +973,7 @@ pioD: gpio@fffff800 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
};
pioE: gpio@fffffa00 {
@@ -984,7 +984,7 @@ pioE: gpio@fffffa00 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioE_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
};
};
@@ -992,353 +992,9 @@ pmc: pmc@fffffc00 {
compatible = "atmel,sama5d3-pmc", "syscon";
reg = <0xfffffc00 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <50000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,sama5d3-clk-pll";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <8000000 50000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <0 166000000>;
- atmel,clk-divisors = <1 2 4 3>;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
- };
-
- smd: smdclk {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- smdck: smdck {
- #clock-cells = <0>;
- reg = <4>;
- clocks = <&smd>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
- };
-
- periphck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- dbgu_clk: dbgu_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- hsmc_clk: hsmc_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- pioB_clk: pioB_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- pioC_clk: pioC_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
-
- pioD_clk: pioD_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- pioE_clk: pioE_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <12>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <13>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <14>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <15>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <16>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- twi0_clk: twi0_clk {
- reg = <18>;
- #clock-cells = <0>;
- atmel,clk-output-range = <0 41500000>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <19>;
- atmel,clk-output-range = <0 41500000>;
- };
-
- twi2_clk: twi2_clk {
- #clock-cells = <0>;
- reg = <20>;
- atmel,clk-output-range = <0 41500000>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <21>;
- };
-
- mci1_clk: mci1_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <24>;
- atmel,clk-output-range = <0 166000000>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <25>;
- atmel,clk-output-range = <0 166000000>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <26>;
- atmel,clk-output-range = <0 166000000>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <28>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <29>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <32>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <33>;
- };
-
- isi_clk: isi_clk {
- #clock-cells = <0>;
- reg = <37>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <39>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- sha_clk: sha_clk {
- #clock-cells = <0>;
- reg = <42>;
- };
-
- aes_clk: aes_clk {
- #clock-cells = <0>;
- reg = <43>;
- };
-
- tdes_clk: tdes_clk {
- #clock-cells = <0>;
- reg = <44>;
- };
-
- trng_clk: trng_clk {
- #clock-cells = <0>;
- reg = <45>;
- };
-
- fuse_clk: fuse_clk {
- #clock-cells = <0>;
- reg = <48>;
- };
-
- mpddr_clk: mpddr_clk {
- #clock-cells = <0>;
- reg = <49>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
reset_controller: rstc@fffffe00 {
@@ -1357,7 +1013,7 @@ pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
watchdog: watchdog@fffffe40 {
@@ -1399,7 +1055,7 @@ usb0: gadget@500000 {
reg = <0x00500000 0x100000
0xf8030000 0x4000>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udphs_clk>, <&utmi>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
@@ -1513,7 +1169,7 @@ usb1: ohci@600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -1522,7 +1178,7 @@ usb2: ehci@700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -1538,7 +1194,7 @@ ebi: ebi@10000000 {
0x1 0x0 0x40000000 0x10000000
0x2 0x0 0x50000000 0x10000000
0x3 0x0 0x60000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index 2470dd3fff25..9ac29bf3f933 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -31,29 +31,13 @@ pinctrl_can1_rx_tx: can1_rx_tx {
};
- pmc: pmc@fffffc00 {
- periphck {
- can0_clk: can0_clk {
- #clock-cells = <0>;
- reg = <40>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- can1_clk: can1_clk {
- #clock-cells = <0>;
- reg = <41>;
- atmel,clk-output-range = <0 83000000>;
- };
- };
- };
-
can0: can@f000c000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf000c000 0x300>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
- clocks = <&can0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
clock-names = "can_clk";
status = "disabled";
};
@@ -64,7 +48,7 @@ can1: can@f8010000 {
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
- clocks = <&can1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
clock-names = "can_clk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
index 9aef414bcd2e..45226108850d 100644
--- a/arch/arm/boot/dts/sama5d3_emac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -31,12 +31,6 @@ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with
};
pmc: pmc@fffffc00 {
- periphck {
- macb1_clk: macb1_clk {
- #clock-cells = <0>;
- reg = <35>;
- };
- };
};
macb1: ethernet@f802c000 {
@@ -45,7 +39,7 @@ macb1: ethernet@f802c000 {
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
- clocks = <&macb1_clk>, <&macb1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_PERIPHERAL 35>;
clock-names = "hclk", "pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
index 3667765a138b..884df7a54dbb 100644
--- a/arch/arm/boot/dts/sama5d3_gmac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -63,22 +63,13 @@ AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */
};
};
- pmc: pmc@fffffc00 {
- periphck {
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <34>;
- };
- };
- };
-
macb0: ethernet@f0028000 {
compatible = "atmel,sama5d3-gem";
reg = <0xf0028000 0x100>;
interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_PERIPHERAL 34>;
clock-names = "hclk", "pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
index 2cf046cd4e99..308d2fc276d6 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -16,7 +16,7 @@ hlcdc: hlcdc@f0030000 {
compatible = "atmel,sama5d3-hlcdc";
reg = <0xf0030000 0x2000>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
@@ -192,23 +192,6 @@ AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* LCDD22 pin */
};
};
};
-
- pmc: pmc@fffffc00 {
- periphck {
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <36>;
- };
- };
-
- systemck {
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index 3c83c1c36ac8..7141ee97ec3e 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -30,15 +30,6 @@ AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC13 periph A MCI2_DA2 with p
};
};
- pmc: pmc@fffffc00 {
- periphck {
- mci2_clk: mci2_clk {
- #clock-cells = <0>;
- reg = <23>;
- };
- };
- };
-
mmc2: mmc@f8004000 {
compatible = "atmel,hsmci";
reg = <0xf8004000 0x600>;
@@ -47,7 +38,7 @@ mmc2: mmc@f8004000 {
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
- clocks = <&mci2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "mci_clk";
status = "disabled";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 215802b8db30..2b18c5c2cc03 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -17,23 +17,13 @@ aliases {
ahb {
apb {
- pmc: pmc@fffffc00 {
- periphck {
- tcb1_clk: tcb1_clk {
- #clock-cells = <0>;
- reg = <27>;
- atmel,clk-output-range = <0 166000000>;
- };
- };
- };
-
tcb1: timer@f8014000 {
compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xf8014000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb1_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index cb62adbd28ed..a3eaba995cf4 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -36,29 +36,13 @@ pinctrl_uart1: uart1-0 {
};
};
- pmc: pmc@fffffc00 {
- periphck {
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <16>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <17>;
- atmel,clk-output-range = <0 83000000>;
- };
- };
- };
-
uart0: serial@f0024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf0024000 0x100>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "usart";
status = "disabled";
};
@@ -69,7 +53,7 @@ uart1: serial@f8028000 {
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
clock-names = "usart";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 35031bbc7e70..a499de8a7a64 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -46,7 +46,7 @@ i2c0: i2c@f0014000 {
wm8904: wm8904@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
- clocks = <&pck0>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "mclk";
};
};
@@ -60,9 +60,9 @@ ov2640: camera@30 {
resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
/* use pck1 for the master clock of ov2640 */
- clocks = <&pck1>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 9>;
clock-names = "xvclk";
- assigned-clocks = <&pck1>;
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
assigned-clock-rates = <25000000>;
port {
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
index 8a6916a69da4..fa9e5e2a745d 100644
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
@@ -45,7 +45,7 @@ i2c0: i2c@f0014000 {
wm8904: wm8904@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
- clocks = <&pck0>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "mclk";
};
};
@@ -59,9 +59,9 @@ ov2640: camera@30 {
resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
/* use pck1 for the master clock of ov2640 */
- clocks = <&pck1>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 9>;
clock-names = "xvclk";
- assigned-clocks = <&pck1>;
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
assigned-clock-rates = <25000000>;
port {
--
2.24.1