[PATCH v3] iio: imu/mpu6050: support dual-edge IRQ
From: MichaÅ MirosÅaw
Date: Sat Jan 11 2020 - 10:19:50 EST
Make mpu6050 usable on platforms which provide only any-edge interrupts.
One example of this kind of platform is AT91SAM9G45
Signed-off-by: MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
---
v3: reword commit message
v2: just remove the dev_warn() message
Signed-off-by: MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 5 +----
2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 2261c6c4ac65..4cfdd19ee4fc 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -1118,7 +1118,7 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
irq_type = irqd_get_trigger_type(desc);
if (!irq_type)
irq_type = IRQF_TRIGGER_RISING;
- if (irq_type == IRQF_TRIGGER_RISING)
+ if (irq_type & IRQF_TRIGGER_RISING) // rising or both-edge
st->irq_mask = INV_MPU6050_ACTIVE_HIGH;
else if (irq_type == IRQF_TRIGGER_FALLING)
st->irq_mask = INV_MPU6050_ACTIVE_LOW;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 72d8c5790076..a8a833f8b99b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -180,11 +180,8 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
"failed to ack interrupt\n");
goto flush_fifo;
}
- if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT)) {
- dev_warn(regmap_get_device(st->map),
- "spurious interrupt with status 0x%x\n", int_status);
+ if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT))
goto end_session;
- }
if (!(st->chip_config.accl_fifo_enable |
st->chip_config.gyro_fifo_enable))
--
2.20.1