Re: [RFC PATCH v1 00/10] Enable RK3066 NANDC for MK808ãèææïéäçlinux-rockchip-bounces+shawn.lin=rock-chips.com@xxxxxxxxxxxxxxxxxxxäåã

[Shawn Lin]

+ Yifeng Zhao

On 2020/1/9 4:53, Johan Jonker wrote:
> DISCLAIMER: Use at your own risk.
> Status: For testing only!
>
> Version: V1
>
> Title: Enable RK3066 NANDC for MK808.
>
> The majority of Rockchip devices use a closed source FTL driver
> to reduce wear leveling. This patch serie proposes
> an experimental raw NAND controller driver for basic tasks
> in order to get the bindings and the nodes accepted for in the dts files.
>
> What does it do:
>
> On module load this driver will reserve its resources.
> After initialization the MTD framework will then try to detect
> the type and number of NAND chips. When all conditions are met,
> it registers it self as MTD device.
> This driver is then ready to receive user commands
> such as to read and write NAND pages.
>
> Test examples:
>
> # dd if-/dev/mtd0 of=dd.bin bs=8192 count=4
>
> # nanddump -a -l 32768 -f nanddump.bin /dev/mtd0
>
> Not tested:
>
> NANDC version 9.
> NAND raw write.
> RK3066 still has no support for Uboot.
> Any write command would interfere with data structures made by the boot loader.
>
> Etc.
>
> Problems:
>
> No bad block support. Most devices use a FTL bad block map with tags
> that must be located on specific page locations which is outside
> the scope of the raw MTD framework.


Hi Johan,

I loop in the author of the original NANDC driver who is now gonna to
develop a new version of NANDC driver in near future that supports more
features like bad block supoort. Maybe he could share his TODO.

> No partition support. A FTL driver will store at random locations and
> a linear user specific layout does not fit within
> the generic character of this basic driver.
>
> Etc.
>
> Chris Zhong (1):
>    ARM: dts: rockchip: add nandc node for rk3066a/rk3188
>
> Dingqiang Lin (2):
>    arm64: dts: rockchip: add nandc node for px30
>    arm64: dts: rockchip: add nandc node for rk3308
>
> Jianqun Xu (1):
>    ARM: dts: rockchip: add nandc nodes for rk3288
>
> Johan Jonker (2):
>    dt-bindings: mtd: add rockchip nand controller bindings
>    ARM: dts: rockchip: rk3066a-mk808: enable nandc node
>
> Jon Lin (1):
>    ARM: dts: rockchip: add nandc node for rv1108
>
> Wenping Zhang (1):
>    ARM: dts: rockchip: add nandc node for rk322x
>
> Yifeng Zhao (1):
>    mtd: nand: raw: add rockchip nand controller driver
>
> Zhaoyifeng (1):
>    arm64: dts: rockchip: add nandc node for rk3368
>
>   .../devicetree/bindings/mtd/rockchip,nandc.yaml    |   78 ++
>   arch/arm/boot/dts/rk3066a-mk808.dts                |    9 +
>   arch/arm/boot/dts/rk322x.dtsi                      |   11 +
>   arch/arm/boot/dts/rk3288.dtsi                      |   24 +
>   arch/arm/boot/dts/rk3xxx.dtsi                      |   11 +
>   arch/arm/boot/dts/rv1108.dtsi                      |   11 +
>   arch/arm64/boot/dts/rockchip/px30.dtsi             |   15 +
>   arch/arm64/boot/dts/rockchip/rk3308.dtsi           |   11 +
>   arch/arm64/boot/dts/rockchip/rk3368.dtsi           |   12 +
>   drivers/mtd/nand/raw/Kconfig                       |    8 +
>   drivers/mtd/nand/raw/Makefile                      |    1 +
>   drivers/mtd/nand/raw/rockchip_nandc.c              | 1224 ++++++++++++++++++++
>   12 files changed, 1415 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/mtd/rockchip,nandc.yaml
>   create mode 100644 drivers/mtd/nand/raw/rockchip_nandc.c
>
> --
> 2.11.0
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-rockchip