[PATCH 7/9] arm64: dts: allwinner: a64: Move wakeup-capable IRQs to r_intc

From: Samuel Holland
Date: Sun Jan 12 2020 - 23:49:53 EST


All IRQs that can be used to wake up the system must be routed through
r_intc, so they are visible to firmware while the system is suspended.

r_intc IRQ numbers are offset by 32 from the GIC IRQ numbers.

Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 70f4cce6be43..7b2cacc0aecc 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -1044,8 +1044,9 @@
compatible = "allwinner,sun50i-a64-rtc",
"allwinner,sun8i-h3-rtc";
reg = <0x01f00000 0x400>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out", "iosc";
clocks = <&osc32k>;
#clock-cells = <1>;
@@ -1094,7 +1095,8 @@
clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&r_ir_rx_pin>;
status = "disabled";
@@ -1114,7 +1116,8 @@
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
--
2.23.0