On Mon, Dec 16, 2019 at 7:57 PM Ramuthevar,Vadivel MuruganXSorry for the trouble, will fix it .
<vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote:
From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>This fails in linux-next. Please run 'make dt_binding_check' and fix:
Add a YAML schema to use the host controller driver with the
eMMC PHY on Intel's Lightning Mountain SoC.
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
---
.../bindings/phy/intel,lgm-emmc-phy.yaml | 56 ++++++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
new file mode 100644
index 000000000000..ff7959c21af0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
+
+maintainers:
+ - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
+
+description: |+
+ Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
+ node is used to reference the base address of eMMC phy registers.
+
+ The eMMC PHY node should be the child of a syscon node with the
+ required property:
+
+ - compatible: Should be one of the following:
+ "intel,lgm-syscon", "syscon"
+ - reg:
+ maxItems: 1
+
+properties:
+ compatible:
+ const: intel,lgm-emmc-phy
+
+ "#phy-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+ - clocks
+
+examples:
+ - |
+ sysconf: chiptop@e0200000 {
+ compatible = "intel,lgm-syscon", "syscon";
+ reg = <0xe0200000 0x100>;
+
+ emmc-phy: emmc-phy@a8 {
Error: Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.19-20
syntax error
FATAL ERROR: Unable to parse input tree
Thanks for the direction.
The problem is labels can't have '-'.
Rob