media: mtk-vcodec: reset segment data then trig decoder

From: gtk_ruiwang
Date: Mon Jan 13 2020 - 22:32:42 EST


From: gtk_ruiwang <gtk_ruiwang@xxxxxxxxxxxx>

VP9 bitstream specification indicate segment data should reset to
default when meet key frames, intra only frames or enable error
resilience mode. So memset segmentation map buffer before every
decode process is not appropriate.

Reset segment data only when needed, then trig decoder hardware

Signed-off-by: Rui Wang <gtk_ruiwang@xxxxxxxxxxxx>
---
.../platform/mtk-vcodec/vdec/vdec_vp9_if.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c
index 24c1f0bf2147..42c9c3c98076 100644
--- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c
+++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c
@@ -110,7 +110,9 @@ struct vp9_sf_ref_fb {
* @buf_len_sz_c : size used to store cbcr plane ufo info (AP-R, VPU-W)

* @profile : profile sparsed from vpu (AP-R, VPU-W)
- * @show_frame : display this frame or not (AP-R, VPU-W)
+ * @show_frame : [BIT(0)] display this frame or not (AP-R, VPU-W)
+ * [BIT(14)] reset segment data or not (AP-R, VPU-W)
+ * [BIT(15)] trig decoder hardware or not (AP-R, VPU-W)
* @show_existing_frame : inform this frame is show existing frame
* (AP-R, VPU-W)
* @frm_to_show_idx : index to show frame (AP-R, VPU-W)
@@ -494,12 +496,12 @@ static void vp9_swap_frm_bufs(struct vdec_vp9_inst *inst)
frm_to_show->fb->base_y.size);
}
if (!vp9_is_sf_ref_fb(inst, inst->cur_fb)) {
- if (vsi->show_frame)
+ if (vsi->show_frame & BIT(0))
vp9_add_to_fb_disp_list(inst, inst->cur_fb);
}
} else {
if (!vp9_is_sf_ref_fb(inst, inst->cur_fb)) {
- if (vsi->show_frame)
+ if (vsi->show_frame & BIT(0))
vp9_add_to_fb_disp_list(inst, frm_to_show->fb);
}
}
@@ -870,13 +872,22 @@ static int vdec_vp9_decode(void *h_vdec, struct mtk_vcodec_mem *bs,
vsi->sf_frm_sz[idx]);
}
}
- memset(inst->seg_id_buf.va, 0, inst->seg_id_buf.size);
ret = vpu_dec_start(&inst->vpu, data, 3);
if (ret) {
mtk_vcodec_err(inst, "vpu_dec_start failed");
goto DECODE_ERROR;
}

+ if ((vsi->show_frame & BIT(15)) &&
+ (vsi->show_frame & BIT(14))) {
+ memset(inst->seg_id_buf.va, 0, inst->seg_id_buf.size);
+ ret = vpu_dec_start(&inst->vpu, NULL, 0);
+ if (ret) {
+ mtk_vcodec_err(inst, "vpu trig decoder failed");
+ goto DECODE_ERROR;
+ }
+ }
+
ret = validate_vsi_array_indexes(inst, vsi);
if (ret) {
mtk_vcodec_err(inst, "Invalid values from VPU.");
--
2.18.0