RE: [PATCH V4 RESEND 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer

From: Joakim Zhang
Date: Tue Jan 14 2020 - 03:22:20 EST

Next message: Chunfeng Yun: "Re: [RESEND PATCH v5 01/11] dt-bindings: phy-mtk-tphy: add two optional properties for u2phy"
Previous message: Auger Eric: "Re: [PATCH] KVM: arm/arm64: vgic-its: Check hopefully the last DISCARD command error"
In reply to: Joakim Zhang: "RE: [PATCH V4 RESEND 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer"
Next in thread: Rob Herring: "Re: [PATCH V4 RESEND 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

> -----Original Message-----
> From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> Sent: 2020年1月14日 10:44
> To: Rob Herring <robh@xxxxxxxxxx>
> Cc: maz@xxxxxxxxxx; jason@xxxxxxxxxxxxxx; tglx@xxxxxxxxxxxxx;
> mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; dl-linux-imx
> <linux-imx@xxxxxxx>; Andy Duan <fugang.duan@xxxxxxx>
> Subject: RE: [PATCH V4 RESEND 1/2] dt-bindings/irq: add binding for NXP
> INTMUX interrupt multiplexer
>
>
> > -----Original Message-----
> > From: Rob Herring <robh@xxxxxxxxxx>
> > Sent: 2020年1月14日 5:04
> > To: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> > Cc: maz@xxxxxxxxxx; jason@xxxxxxxxxxxxxx; tglx@xxxxxxxxxxxxx;
> > mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> > kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; dl-linux-imx
> > <linux-imx@xxxxxxx>; Andy Duan <fugang.duan@xxxxxxx>
> > Subject: Re: [PATCH V4 RESEND 1/2] dt-bindings/irq: add binding for
> > NXP INTMUX interrupt multiplexer
> >
> > On Mon, Jan 13, 2020 at 03:08:40PM +0800, Joakim Zhang wrote:
> > > This patch adds the DT bindings for the NXP INTMUX interrupt
> > > multiplexer for i.MX8 family SoCs.
> > >
> > > Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> > > ---
> > > .../interrupt-controller/fsl,intmux.yaml | 77
> +++++++++++++++++++
> > > 1 file changed, 77 insertions(+)
> > > create mode 100644
> > > Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.ya
> > > ml
> >
> > Please run 'make dt_binding_check' and fix the errors:
> >
> > Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml:
> > while scanning for the next token found character that cannot start any token
> > in "<unicode string>", line 60, column 1
> Got it. Will keep in mind. Thanks.
>
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.
> > > ya
> > > ml
> > > b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.
> > > ya
> > > ml
> > > new file mode 100644
> > > index 000000000000..4dba532fe0bd
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,int
> > > +++ mu
> > > +++ x.yaml
> > > @@ -0,0 +1,77 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > > +---
> > > +$id:
> > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fde
> > > +vi
> > >
> >
> +cetree.org%2Fschemas%2Finterrupt-controller%2Ffsl%2Cintmux.yaml%23&a
> > m
> > >
> >
> +p;data=02%7C01%7Cqiangqing.zhang%40nxp.com%7Cdc2443dc111149805c7
> > 208d7
> > >
> >
> +986c157f%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63714546
> > 2291934
> > >
> >
> +492&sdata=Ao4iuj2D48KAeC%2FvQvJqUUxGJEjSY0HyL5ZlT2XrSrg%3D&
> > amp;re
> > > +served=0
> > > +$schema:
> > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fde
> > > +vi
> > >
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=02%7C01%7Cqia
> > ngqing
> > >
> >
> +.zhang%40nxp.com%7Cdc2443dc111149805c7208d7986c157f%7C686ea1d3b
> > c2b4c6
> > >
> >
> +fa92cd99c5c301635%7C0%7C0%7C637145462291934492&sdata=YoHb
> > TO5C8Nlq
> > > +YYoWTNufaIxnvdtPUZaKzvwK49I9Zdc%3D&reserved=0
> > > +
> > > +title: Freescale INTMUX interrupt multiplexer
> > > +
> > > +maintainers:
> > > + - Marc Zyngier <maz@xxxxxxxxxx>
> > > +
> > > +properties:
> > > + compatible:
> > > + items:
> > > + const: fsl,imx-intmux
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + interrupts:
> > > + minItems: 1
> > > + maxItems: 8
> > > + description: |
> > > + Should contain the parent interrupt lines (up to 8) used to multiplex
> > > + the input interrupts.
> > > +
> > > + interrupt-controller: true
> > > +
> > > + '#interrupt-cells':
> > > + const: 2
> > > +
> > > + clocks:
> > > + maxItems: 1
> > > + description: ipg clock.
> > > +
> > > + clock-names:
> > > + items:
> > > + const: ipg
> > > +
> > > + fsl,intmux_chans:
> >
> > Don't use '_' in property names.
> Got it.
>
> > Is this any different from the length of 'interrupts' which you can count?
> A bit different. Such as, the length of 'interrupts' is 8, but we can set
> fsl,intmux_chans value is 4. That means there are 8 channels, but actually we
> only use 4 channels.
> If you think this make no sense, due to we can assign 4 items for 'interrupts' to
> get the same result. So we can count the length of 'interrupts' to get the
> channels configured, then this property is no need.
> Which one do you think is better?
> interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> fsl,intmux_chans = <4>;

One more add, the number of channels is fixed to 8. It will make more clear to users that it supports 8 channels with 8 items for 'interrupts', and users can decide how many
channels they use with 'fsl,intmux_chans' property.

Best Regards,
Joakim Zhang
> Best Regards,
> Joakim Zhang
> > > + maxItems: 1
> > > + description: |
> > > + The number of channels used for interrupt source. The Maximum
> > value is 8.
> > > + If this property is not set in DT then driver uses 1 channel by
> default.
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - interrupts
> > > + - interrupt-controller
> > > + - '#interrupt-cells'
> > > + - clocks
> > > + - clock-name
> > > + - fsl,intmux_chans
> > > +
> > > +additionalProperties: false
> > > +
> > > +Example:
> > > +
> > > + intmux@37400000 {
> >
> > interrupt-controller@...
> >
> > > + compatible = "fsl,imx-intmux";
> > > + reg = <0x37400000 0x1000>;
> > > + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> > > + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> > > + interrupt-controller;
> > > + #interrupt-cells = <2>;
> > > + clocks = <&clk IMX8QM_CM40_IPG_CLK>;
> > > + clock-names = "ipg";
> > > + fsl,intmux_chans = <8>;
> > > + };
> > > +
> > > --
> > > 2.17.1
> > >

Next message: Chunfeng Yun: "Re: [RESEND PATCH v5 01/11] dt-bindings: phy-mtk-tphy: add two optional properties for u2phy"
Previous message: Auger Eric: "Re: [PATCH] KVM: arm/arm64: vgic-its: Check hopefully the last DISCARD command error"
In reply to: Joakim Zhang: "RE: [PATCH V4 RESEND 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer"
Next in thread: Rob Herring: "Re: [PATCH V4 RESEND 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]