Re: [PATCH v5 2/6] ARM: dts: bcm2711: Enable PCIe controller

[Lorenzo Pieralisi]

On Mon, Dec 16, 2019 at 12:01:08PM +0100, Nicolas Saenz Julienne wrote:
> This enables bcm2711's PCIe bus, which is hardwired to a VIA
> Technologies XHCI USB 3.0 controller.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> 
> ---
> 
> Changes since v4:
>   - Rebase commit taking into account genet support series
> 
> Changes since v3:
>   - Remove unwarranted comment
> 
> Changes since v2:
>   - Remove unused interrupt-map
>   - correct dma-ranges to it's full size, non power of 2 bus DMA
>     constraints now supported in linux-next[1]
>   - add device_type
>   - rename alias from pcie_0 to pcie0
> 
> Changes since v1:
>   - remove linux,pci-domain
> 
> [1] https://lkml.org/lkml/2019/11/21/235
> 
>  arch/arm/boot/dts/bcm2711.dtsi | 31 ++++++++++++++++++++++++++++++-
>  1 file changed, 30 insertions(+), 1 deletion(-)

Olof as we discussed previously, I will not merge this dts change and
drop it from the series - Nicolas should redirect it to arm-soc, please
let me know if my understanding is correct.

Thanks,
Lorenzo

> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index e2f6ffb00aa9..b56388ce1216 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -331,7 +331,36 @@ scb {
>  		#address-cells = <2>;
>  		#size-cells = <1>;
>  
> -		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>;
> +		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
> +			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
> +
> +		pcie0: pcie@7d500000 {
> +			compatible = "brcm,bcm2711-pcie";
> +			reg = <0x0 0x7d500000 0x9310>;
> +			device_type = "pci";
> +			#address-cells = <3>;
> +			#interrupt-cells = <1>;
> +			#size-cells = <2>;
> +			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "pcie", "msi";
> +			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
> +							IRQ_TYPE_LEVEL_HIGH>;
> +			msi-controller;
> +			msi-parent = <&pcie0>;
> +
> +			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
> +				  0x0 0x04000000>;
> +			/*
> +			 * The wrapper around the PCIe block has a bug
> +			 * preventing it from accessing beyond the first 3GB of
> +			 * memory.
> +			 */
> +			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
> +				      0x0 0xc0000000>;
> +			brcm,enable-ssc;
> +		};
>  
>  		genet: ethernet@7d580000 {
>  			compatible = "brcm,bcm2711-genet-v5";
> -- 
> 2.24.0
>