[RFC PATCH v1 2/3] dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
From: Johan Jonker
Date: Tue Jan 14 2020 - 16:38:24 EST
Convert the Synopsys designware mobile storage host controller
device tree bindings to yaml
Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
.../bindings/mmc/synopsys-dw-mshc-common.yaml | 81 ++++++++++++
.../devicetree/bindings/mmc/synopsys-dw-mshc.txt | 141 ---------------------
.../devicetree/bindings/mmc/synopsys-dw-mshc.yaml | 88 +++++++++++++
3 files changed, 169 insertions(+), 141 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
delete mode 100644 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
create mode 100644 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
new file mode 100644
index 000000000..aae84a4bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Common Properties
+
+allOf:
+ - $ref: "mmc-controller-common.yaml"
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@xxxxxxxxxx>
+
+properties:
+ resets:
+ maxItems: 1
+ description:
+ phandle + reset specifier pair, intended to represent hardware
+ reset signal present internally in some host controller IC designs.
+ See Documentation/devicetree/bindings/reset/reset.txt for details.
+
+ reset-names:
+ const: reset
+ description:
+ Request name for using "resets" property.
+ (It will be used together with "resets" property.)
+
+ clock-frequency:
+ description:
+ Should be the frequency (in Hz) of the ciu clock. If this
+ is specified and the ciu clock is specified then we'll try to set the ciu
+ clock to this at probe time.
+
+ fifo-depth:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The maximum size of the tx/rx fifo's. If this property is not
+ specified, the default value of the fifo size is determined from the
+ controller registers.
+
+ card-detect-delay:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 0
+ description:
+ Delay in milli-seconds before detecting card after card
+ insert event. The default value is 0.
+
+ data-addr:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Override fifo address with value provided by DT. The default FIFO reg
+ offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
+ by driver. If the controller does not follow this rule, please use
+ this property to set fifo address in device tree.
+
+ fifo-watermark-aligned:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Data done irq is expected if data length is less than
+ watermark in PIO mode. But fifo watermark is requested to be aligned
+ with data length in some SoC so that TX/RX irq can be generated with
+ data done irq. Add this watermark quirk to mark this requirement and
+ force fifo watermark setting accordingly.
+
+ dmas:
+ maxItems: 1
+ description:
+ List of DMA specifiers with the controller specific format as described
+ in the generic DMA client binding.
+ Refer to dma-controller.yaml for details.
+
+ dma-names:
+ const: rx-tx
+ description:
+ Request names for generic DMA client binding.
+ Refer to dma-controller.yaml for details.
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
deleted file mode 100644
index 7e5e427a2..000000000
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-* Synopsys Designware Mobile Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core mmc properties described by mmc.txt and the
-properties used by the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
- - snps,dw-mshc: for controllers compliant with synopsys dw-mshc.
-* #address-cells: should be 1.
-* #size-cells: should be 0.
-
-# Slots (DEPRECATED): The slot specific information are contained within
- child-nodes with each child-node representing a supported slot. There should
- be atleast one child node representing a card slot. The name of the child node
- representing the slot is recommended to be slot@n where n is the unique number
- of the slot connected to the controller. The following are optional properties
- which can be included in the slot child node.
-
- * reg: specifies the physical slot number. The valid values of this
- property is 0 to (num-slots -1), where num-slots is the value
- specified by the num-slots property.
-
- * bus-width: as documented in mmc core bindings.
-
- * wp-gpios: specifies the write protect gpio line. The format of the
- gpio specifier depends on the gpio controller. If a GPIO is not used
- for write-protect, this property is optional.
-
- * disable-wp: If the wp-gpios property isn't present then (by default)
- we'd assume that the write protect is hooked up directly to the
- controller's special purpose write protect line (accessible via
- the WRTPRT register). However, it's possible that we simply don't
- want write protect. In that case specify 'disable-wp'.
- NOTE: This property is not required for slots known to always
- connect to eMMC or SDIO cards.
-
-Optional properties:
-
-* resets: phandle + reset specifier pair, intended to represent hardware
- reset signal present internally in some host controller IC designs.
- See Documentation/devicetree/bindings/reset/reset.txt for details.
-
-* reset-names: request name for using "resets" property. Must be "reset".
- (It will be used together with "resets" property.)
-
-* clocks: from common clock binding: handle to biu and ciu clocks for the
- bus interface unit clock and the card interface unit clock.
-
-* clock-names: from common clock binding: Shall be "biu" and "ciu".
- If the biu clock is missing we'll simply skip enabling it. If the
- ciu clock is missing we'll just assume that the clock is running at
- clock-frequency. It is an error to omit both the ciu clock and the
- clock-frequency.
-
-* clock-frequency: should be the frequency (in Hz) of the ciu clock. If this
- is specified and the ciu clock is specified then we'll try to set the ciu
- clock to this at probe time.
-
-* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not
- specified, the default value of the fifo size is determined from the
- controller registers.
-
-* card-detect-delay: Delay in milli-seconds before detecting card after card
- insert event. The default value is 0.
-
-* data-addr: Override fifo address with value provided by DT. The default FIFO reg
- offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by
- driver. If the controller does not follow this rule, please use this property
- to set fifo address in device tree.
-
-* fifo-watermark-aligned: Data done irq is expected if data length is less than
- watermark in PIO mode. But fifo watermark is requested to be aligned with data
- length in some SoC so that TX/RX irq can be generated with data done irq. Add this
- watermark quirk to mark this requirement and force fifo watermark setting
- accordingly.
-
-* vmmc-supply: The phandle to the regulator to use for vmmc. If this is
- specified we'll defer probe until we can find this regulator.
-
-* dmas: List of DMA specifiers with the controller specific format as described
- in the generic DMA client binding. Refer to dma.txt for details.
-
-* dma-names: request names for generic DMA client binding. Must be "rx-tx".
- Refer to dma.txt for details.
-
-Aliases:
-
-- All the MSHC controller nodes should be represented in the aliases node using
- the following format 'mshc{n}' where n is a unique number for the alias.
-
-Example:
-
-The MSHC controller node can be split into two portions, SoC specific and
-board specific portions as listed below.
-
- dwmmc0@12200000 {
- compatible = "snps,dw-mshc";
- clocks = <&clock 351>, <&clock 132>;
- clock-names = "biu", "ciu";
- reg = <0x12200000 0x1000>;
- interrupts = <0 75 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- data-addr = <0x200>;
- fifo-watermark-aligned;
- resets = <&rst 20>;
- reset-names = "reset";
- };
-
-[board specific internal DMA resources]
-
- dwmmc0@12200000 {
- clock-frequency = <400000000>;
- clock-freq-min-max = <400000 200000000>;
- broken-cd;
- fifo-depth = <0x80>;
- card-detect-delay = <200>;
- vmmc-supply = <&buck8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- };
-
-[board specific generic DMA request binding]
-
- dwmmc0@12200000 {
- clock-frequency = <400000000>;
- clock-freq-min-max = <400000 200000000>;
- broken-cd;
- fifo-depth = <0x80>;
- card-detect-delay = <200>;
- vmmc-supply = <&buck8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- dmas = <&pdma 12>;
- dma-names = "rx-tx";
- };
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
new file mode 100644
index 000000000..6f85a21d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Binding
+
+allOf:
+ - $ref: "synopsys-dw-mshc-common.yaml"
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@xxxxxxxxxx>
+
+properties:
+ compatible:
+ const: snps,dw-mshc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 2
+ description:
+ Handle to "biu" and "ciu" clocks for the
+ bus interface unit clock and the card interface unit clock.
+
+ clock-names:
+ items:
+ - const: biu
+ - const: ciu
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ # The MSHC controller node can be split into two portions, SoC specific and
+ # board specific portions as listed below.
+ - |
+ dwmmc0@12200000 {
+ compatible = "snps,dw-mshc";
+ clocks = <&clock 351>, <&clock 132>;
+ clock-names = "biu", "ciu";
+ reg = <0x12200000 0x1000>;
+ interrupts = <0 75 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ data-addr = <0x200>;
+ fifo-watermark-aligned;
+ resets = <&rst 20>;
+ reset-names = "reset";
+ };
+ # [board specific internal DMA resources]
+ - |
+ dwmmc0@12200000 {
+ clock-frequency = <400000000>;
+ clock-freq-min-max = <400000 200000000>;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ vmmc-supply = <&buck8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ };
+ # [board specific generic DMA request binding]
+ - |
+ dwmmc0@12200000 {
+ clock-frequency = <400000000>;
+ clock-freq-min-max = <400000 200000000>;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ vmmc-supply = <&buck8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ dmas = <&pdma 12>;
+ dma-names = "rx-tx";
+ };
--
2.11.0