[PATCH net v2 4/4] net: stmmac: update pci platform data to use phy_interface

From: Ong Boon Leong
Date: Wed Jan 15 2020 - 02:10:58 EST


From: Voon Weifeng <weifeng.voon@xxxxxxxxx>

The recent patch to support passive mode converter did not take care the
phy interface configuration in PCI platform data. Hence, converting all
the PCI platform data from plat->interface to plat->phy_interface as the
default mode is meant for PHY.

Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Voon Weifeng <weifeng.voon@xxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 8237dbc3e991..d2bc04dedd7c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -96,7 +96,7 @@ static int stmmac_default_data(struct pci_dev *pdev,

plat->bus_id = 1;
plat->phy_addr = 0;
- plat->interface = PHY_INTERFACE_MODE_GMII;
+ plat->phy_interface = PHY_INTERFACE_MODE_GMII;

plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
@@ -220,7 +220,8 @@ static int ehl_sgmii_data(struct pci_dev *pdev,
{
plat->bus_id = 1;
plat->phy_addr = 0;
- plat->interface = PHY_INTERFACE_MODE_SGMII;
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+
return ehl_common_data(pdev, plat);
}

@@ -233,7 +234,8 @@ static int ehl_rgmii_data(struct pci_dev *pdev,
{
plat->bus_id = 1;
plat->phy_addr = 0;
- plat->interface = PHY_INTERFACE_MODE_RGMII;
+ plat->phy_interface = PHY_INTERFACE_MODE_RGMII;
+
return ehl_common_data(pdev, plat);
}

@@ -261,7 +263,7 @@ static int tgl_sgmii_data(struct pci_dev *pdev,
{
plat->bus_id = 1;
plat->phy_addr = 0;
- plat->interface = PHY_INTERFACE_MODE_SGMII;
+ plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
return tgl_common_data(pdev, plat);
}

@@ -361,7 +363,7 @@ static int quark_default_data(struct pci_dev *pdev,

plat->bus_id = pci_dev_id(pdev);
plat->phy_addr = ret;
- plat->interface = PHY_INTERFACE_MODE_RMII;
+ plat->phy_interface = PHY_INTERFACE_MODE_RMII;

plat->dma_cfg->pbl = 16;
plat->dma_cfg->pblx8 = true;
@@ -418,7 +420,7 @@ static int snps_gmac5_default_data(struct pci_dev *pdev,

plat->bus_id = 1;
plat->phy_addr = -1;
- plat->interface = PHY_INTERFACE_MODE_GMII;
+ plat->phy_interface = PHY_INTERFACE_MODE_GMII;

plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
--
2.17.1