[PATCH v4] HID: logitech-dj: add full support for the Powerplay mat/receiver

[Filipe LaÃns]

The Logitech G Powerplay has a lightspeed receiver with a static HID++
device with ID 7 attached to it to. It is used to configure the led on
the mat. For this reason I increased the max number of devices.

Signed-off-by: Filipe LaÃns <lains@xxxxxxxxxxxxx>
---

v4

- Don't define the powerplay receiver (I forgot that we already did that
  in a previous patch)

---
 drivers/hid/hid-logitech-dj.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index bb50d6e7745b..1009f741a11d 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -16,11 +16,11 @@
 #include <asm/unaligned.h>
 #include "hid-ids.h"
 
-#define DJ_MAX_PAIRED_DEVICES			6
+#define DJ_MAX_PAIRED_DEVICES			7
 #define DJ_MAX_NUMBER_NOTIFS			8
 #define DJ_RECEIVER_INDEX			0
 #define DJ_DEVICE_INDEX_MIN			1
-#define DJ_DEVICE_INDEX_MAX			6
+#define DJ_DEVICE_INDEX_MAX			7
 
 #define DJREPORT_SHORT_LENGTH			15
 #define DJREPORT_LONG_LENGTH			32
@@ -980,6 +980,11 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
 		break;
 	}
 
+	/* custom receiver device (eg. powerplay) */
+	if (hidpp_report->device_index == 7) {
+		workitem.reports_supported |= HIDPP;
+	}
+
 	if (workitem.type == WORKITEM_TYPE_EMPTY) {
 		hid_warn(hdev,
 			 "unusable device of type %s (0x%02x) connected on slot %d",
@@ -1850,6 +1855,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
 		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
 	 .driver_data = recvr_type_gaming_hidpp},
+	{ /* Logitech powerplay mat/receiver (0xc539) */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		0xc53a),
+	 .driver_data = recvr_type_gaming_hidpp},
 	{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
 	 .driver_data = recvr_type_27mhz},
-- 
2.24.1