Re: [PATCH v2] drm/amd/dm/mst: Ignore payload update failures

From: Lyude Paul
Date: Fri Jan 24 2020 - 17:01:44 EST


On Fri, 2020-01-24 at 16:46 -0500, Lyude Paul wrote:
> On Fri, 2020-01-24 at 14:20 -0500, Mikita Lipski wrote:
> > On 1/24/20 2:10 PM, Lyude Paul wrote:
> > > Disabling a display on MST can potentially happen after the entire MST
> > > topology has been removed, which means that we can't communicate with
> > > the topology at all in this scenario. Likewise, this also means that we
> > > can't properly update payloads on the topology and as such, it's a good
> > > idea to ignore payload update failures when disabling displays.
> > > Currently, amdgpu makes the mistake of halting the payload update
> > > process when any payload update failures occur, resulting in leaving
> > > DC's local copies of the payload tables out of date.
> > >
> > > This ends up causing problems with hotplugging MST topologies, and
> > > causes modesets on the second hotplug to fail like so:
> > >
> > > [drm] Failed to updateMST allocation table forpipe idx:1
> > > ------------[ cut here ]------------
> > > WARNING: CPU: 5 PID: 1511 at
> > > drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677
> > > update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
> > > Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack
> > > nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4
> > > nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc
> > > vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic
> > > snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops
> > > videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul
> > > snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core
> > > ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm
> > > sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd
> > > wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O)
> > > rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm
> > > drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm
> > > crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core
> > > rtsx_pci pinctrl_amd
> > > CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G O 5.5.0-
> > > rc7Lyude-Test+ #4
> > > Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 )
> > > 01/31/2019
> > > RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
> > > Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06
> > > 49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9
> > > 2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00
> > > RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202
> > > RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: 0000000000000000
> > > RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610
> > > RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000
> > > R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000
> > > R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: 0000000000000002
> > > FS: 00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000)
> > > knlGS:0000000000000000
> > > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: 00000000003406e0
> > > Call Trace:
> > > ? mutex_lock+0xe/0x30
> > > dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu]
> > > ? dm_read_reg_func+0x39/0xb0 [amdgpu]
> > > ? core_link_enable_stream+0x656/0x730 [amdgpu]
> > > core_link_enable_stream+0x656/0x730 [amdgpu]
> > > dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu]
> > > ? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu]
> > > ? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu]
> > > dc_commit_state+0x292/0x770 [amdgpu]
> > > ? add_timer+0x101/0x1f0
> > > ? ttm_bo_put+0x1a1/0x2f0 [ttm]
> > > amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu]
> > > ? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu]
> > > ? amdgpu_bo_move+0x16d/0x2b0 [amdgpu]
> > > ? ttm_bo_handle_move_mem+0x118/0x570 [ttm]
> > > ? ttm_bo_validate+0x134/0x150 [ttm]
> > > ? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu]
> > > ? _cond_resched+0x15/0x30
> > > ? wait_for_completion_timeout+0x38/0x160
> > > ? _cond_resched+0x15/0x30
> > > ? wait_for_completion_interruptible+0x33/0x190
> > > commit_tail+0x94/0x130 [drm_kms_helper]
> > > drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper]
> > > drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper]
> > > drm_mode_setcrtc+0x194/0x6a0 [drm]
> > > ? _cond_resched+0x15/0x30
> > > ? mutex_lock+0xe/0x30
> > > ? drm_mode_getcrtc+0x180/0x180 [drm]
> > > drm_ioctl_kernel+0xaa/0xf0 [drm]
> > > drm_ioctl+0x208/0x390 [drm]
> > > ? drm_mode_getcrtc+0x180/0x180 [drm]
> > > amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
> > > do_vfs_ioctl+0x458/0x6d0
> > > ksys_ioctl+0x5e/0x90
> > > __x64_sys_ioctl+0x16/0x20
> > > do_syscall_64+0x55/0x1b0
> > > entry_SYSCALL_64_after_hwframe+0x44/0xa9
> > > RIP: 0033:0x7fab2121f87b
> > > Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
> > > ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
> > > f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48
> > > RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> > > RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b
> > > RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b
> > > RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: 000055dbd2985d10
> > > R10: 000055dbd2196280 R11: 0000000000000246 R12: 00000000c06864a2
> > > R13: 000000000000000b R14: 0000000000000000 R15: 000055dbd2196280
> > > ---[ end trace 6ea888c24d2059cd ]---
> > >
> > > Note as well, I have only been able to reproduce this on setups with 2
> > > MST displays.
> > >
> > > Changes since v1:
> > > * Don't return false when part 1 or part 2 of updating the payloads
> > > fails, we don't want to abort at any step of the process even if
> > > things fail
> > >
> > > Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx>
> > > Acked-by: Harry Wentland <harry.wentland@xxxxxxx>
> > > Cc: stable@xxxxxxxxxxxxxxx
> > > ---
> > > .../drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 13 ++++---------
> > > 1 file changed, 4 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > > index 069b7a6f5597..318b474ff20e 100644
> > > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> > > @@ -216,7 +216,8 @@ bool
> > > dm_helpers_dp_mst_write_payload_allocation_table(
> > > drm_dp_mst_reset_vcpi_slots(mst_mgr, mst_port);
> > > }
> > >
> > > - ret = drm_dp_update_payload_part1(mst_mgr);
> > > + /* It's OK for this to fail */
> > > + drm_dp_update_payload_part1(mst_mgr);
> > >
> > > /* mst_mgr->->payloads are VC payload notify MST branch using
> > > DPCD or
> > > * AUX message. The sequence is slot 1-63 allocated sequence
> > > for each
> > > @@ -225,9 +226,6 @@ bool
> > > dm_helpers_dp_mst_write_payload_allocation_table(
> > >
> > > get_payload_table(aconnector, proposed_table);
> > >
> > > - if (ret)
> > > - return false;
> > > -
> >
> > Sorry for being picky, but I think this might cause compilation error on
> > some systems for having unused variable (int ret). Its better just to
> > strip out both ret integer declarations.
>
> No problem! It wouldn't be fair if I was the only one who got to be picky
> anyway ;)

Actually, I think you might have made a mistake here - ret is still used in
this function, mind double checking?

>
> > Otherwise the patch is good. Thanks again!
> >
> > Reviewed-by: Mikita Lipski <Mikita.Lipski@xxxxxxx>
> >
> > Mikita
> >
> > > return true;
> > > }
> > >
> > > @@ -285,7 +283,6 @@ bool dm_helpers_dp_mst_send_payload_allocation(
> > > struct amdgpu_dm_connector *aconnector;
> > > struct drm_dp_mst_topology_mgr *mst_mgr;
> > > struct drm_dp_mst_port *mst_port;
> > > - int ret;
> > >
> > > aconnector = (struct amdgpu_dm_connector *)stream-
> > > >dm_stream_context;
> > >
> > > @@ -299,10 +296,8 @@ bool dm_helpers_dp_mst_send_payload_allocation(
> > > if (!mst_mgr->mst_state)
> > > return false;
> > >
> > > - ret = drm_dp_update_payload_part2(mst_mgr);
> > > -
> > > - if (ret)
> > > - return false;
> > > + /* It's OK for this to fail */
> > > + drm_dp_update_payload_part2(mst_mgr);
> > >
> > > if (!enable)
> > > drm_dp_mst_deallocate_vcpi(mst_mgr, mst_port);
> > >
--
Cheers,
Lyude Paul