[PATCH v2 03/10] arm64: dts: qcom: sdm845: Add the missing clocks on the dispcc

[Douglas Anderson]

We're transitioning over to requiring the Qualcomm Display Clock
Controller to specify all the input clocks.  Let's add them for
sdm845.

NOTES:
- Until the Linux driver for sdm845's dispcc is updated, these clocks
  will not actually be used in Linux.  It will continue to use global
  clock names to match things up.
- Although the clocks from the DP PHY are required, the DP PHY isn't
  represented in the dts yet.  Apparently the magic for this is just
  to use <0>.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

Changes in v2:
- Patch ("arm64: dts: qcom: sdm845: Add...dispcc") new for v2.

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d42302b8889b..01354533a61b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2933,6 +2933,18 @@ opp-200000000 {
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sdm845-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&dsi0_phy 0>,
+				 <&dsi0_phy 1>,
+				 <&dsi1_phy 0>,
+				 <&dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "xo", "gpll0",
+				      "dsi0_phy_pll_byte", "dsi0_phy_pll_pixel",
+				      "dsi1_phy_pll_byte", "dsi1_phy_pll_pixel",
+				      "dp_phy_pll_link", "dp_phy_pll_vco_div";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-- 
2.25.0.341.g760bfbb309-goog