[PATCH] of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc

[Michael Ellerman]

There's an OF helper called of_dma_is_coherent(), which checks if a
device has a "dma-coherent" property to see if the device is coherent
for DMA.

But on some platforms devices are coherent by default, and on some
platforms it's not possible to update existing device trees to add the
"dma-coherent" property.

So add a Kconfig symbol to allow arch code to tell
of_dma_is_coherent() that devices are coherent by default, regardless
of the presence of the property.

Select that symbol on powerpc when NOT_COHERENT_CACHE is not set, ie.
when the system has a coherent cache.

Fixes: 92ea637edea3 ("of: introduce of_dma_is_coherent() helper")
Cc: stable@xxxxxxxxxxxxxxx # v3.16+
Reported-by: Christian Zigotzky <chzigotzky@xxxxxxxxxxx>
Tested-by: Christian Zigotzky <chzigotzky@xxxxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
---
 arch/powerpc/Kconfig | 1 +
 drivers/of/Kconfig   | 4 ++++
 drivers/of/address.c | 6 +++++-
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 1ec34e16ed65..19f5aa8ac9a3 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -238,6 +238,7 @@ config PPC
 	select NEED_DMA_MAP_STATE		if PPC64 || NOT_COHERENT_CACHE
 	select NEED_SG_DMA_LENGTH
 	select OF
+	select OF_DMA_DEFAULT_COHERENT		if !NOT_COHERENT_CACHE
 	select OF_EARLY_FLATTREE
 	select OLD_SIGACTION			if PPC32
 	select OLD_SIGSUSPEND
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 37c2ccbefecd..d91618641be6 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -103,4 +103,8 @@ config OF_OVERLAY
 config OF_NUMA
 	bool
 
+config OF_DMA_DEFAULT_COHERENT
+	# arches should select this if DMA is coherent by default for OF devices
+	bool
+
 endif # OF
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 99c1b8058559..e8a39c3ec4d4 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -995,12 +995,16 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
  * @np:	device node
  *
  * It returns true if "dma-coherent" property was found
- * for this device in DT.
+ * for this device in the DT, or if DMA is coherent by
+ * default for OF devices on the current platform.
  */
 bool of_dma_is_coherent(struct device_node *np)
 {
 	struct device_node *node = of_node_get(np);
 
+	if (IS_ENABLED(CONFIG_OF_DMA_DEFAULT_COHERENT))
+		return true;
+
 	while (node) {
 		if (of_property_read_bool(node, "dma-coherent")) {
 			of_node_put(node);
-- 
2.21.1