Re: [PATCH v3 1/3] dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings in yaml format

[Rob Herring]

On Wed, Jan 22, 2020 at 11:54:59AM +0100, Yuti Amonkar wrote:
> Document the bindings used for the Cadence MHDP DPI/DP bridge in
> yaml format.
> 
> Signed-off-by: Yuti Amonkar <yamonkar@xxxxxxxxxxx>
> ---
>  .../bindings/display/bridge/cdns,mhdp.yaml         | 131 +++++++++++++++++++++
>  1 file changed, 131 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
> new file mode 100644
> index 0000000..696418a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
> @@ -0,0 +1,131 @@

Missing SPDX tag. Dual license please.

> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Cadence MHDP bridge
> +
> +maintainers:
> +  - Swapnil Jakhade <sjakhade@xxxxxxxxxxx>
> +  - Yuti Amonkar <yamonkar@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cdns,mhdp8546
> +      - ti,j721e-mhdp8546
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description:
> +          Register block of mhdptx apb registers upto PHY mapped area(AUX_CONFIG_P).
> +          The AUX and PMA registers are mapped to associated phy driver.
> +      - description:
> +          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
> +
> +  reg-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - const: mhdptx
> +      - const: j721e-intg
> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      DP bridge clock, it's used by the IP to know how to translate a number of
> +      clock cycles into a time (which is used to comply with DP standard timings
> +      and delays).
> +
> +  phys:
> +    description: Phandle to the DisplyPort phy.
> +
> +  phy-names:
> +    const: dpphy
> +
> +  ports:
> +    type: object
> +    description:
> +      Ports as described in Documentation/devicetree/bindings/graph.txt
> +
> +    properties:
> +       '#address-cells':

Wrong indentation.

> +         const: 1
> +
> +       '#size-cells':
> +         const: 0
> +
> +       port@0:
> +         type: object
> +         description:
> +           input port representing the DP bridge input
> +
> +       port@1:
> +         type: object
> +         description:
> +           output port representing the DP bridge output.
> +
> +    required:
> +      - port@0
> +      - port@1
> +      - '#address-cells'
> +      - '#size-cells'
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: ti,j721e-mhdp8546
> +    then:
> +      properties:
> +        reg:
> +          minItems: 2
> +          maxItems: 2
> +        reg-names:
> +          minItems: 2
> +          maxItems: 2

As we've already defined the max, you can drop maxItems on these 2.

With those 2 changes,

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>