[PATCH 28/28] ata: move ata_eh_set_lpm() to libata-core-sata.c

[Bartlomiej Zolnierkiewicz]

* un-static ata_eh_set_lpm() and move it to libata-eh-sata.c

* add static inline for ata_eh_set_lpm() for CONFIG_SATA_HOST=n
  case (for PATA hosts "ap && !ap->ops->set_lpm" condition is
  always true so it's sufficient for the function to return zero)

Code size savings on m68k arch using atari_defconfig:

   text    data     bss     dec     hex filename
before:
  16092      18       0   16110    3eee drivers/ata/libata-eh.o
after:
  15346      18       0   15364    3c04 drivers/ata/libata-eh.o

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
 drivers/ata/libata-eh-sata.c | 133 +++++++++++++++++++++++++++++++++++
 drivers/ata/libata-eh.c      | 133 -----------------------------------
 drivers/ata/libata.h         |   9 +++
 3 files changed, 142 insertions(+), 133 deletions(-)

diff --git a/drivers/ata/libata-eh-sata.c b/drivers/ata/libata-eh-sata.c
index 4b55d89862fb..cd7b1b434d53 100644
--- a/drivers/ata/libata-eh-sata.c
+++ b/drivers/ata/libata-eh-sata.c
@@ -214,3 +214,136 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 	ehc->i.err_mask &= ~AC_ERR_DEV;
 }
 EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
+
+/**
+ *	ata_eh_set_lpm - configure SATA interface power management
+ *	@link: link to configure power management
+ *	@policy: the link power management policy
+ *	@r_failed_dev: out parameter for failed device
+ *
+ *	Enable SATA Interface power management.  This will enable
+ *	Device Interface Power Management (DIPM) for min_power and
+ *	medium_power_with_dipm policies, and then call driver specific
+ *	callbacks for enabling Host Initiated Power management.
+ *
+ *	LOCKING:
+ *	EH context.
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+		   struct ata_device **r_failed_dev)
+{
+	struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
+	struct ata_eh_context *ehc = &link->eh_context;
+	struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
+	enum ata_lpm_policy old_policy = link->lpm_policy;
+	bool no_dipm = link->ap->flags & ATA_FLAG_NO_DIPM;
+	unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
+	unsigned int err_mask;
+	int rc;
+
+	/* if the link or host doesn't do LPM, noop */
+	if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
+		return 0;
+
+	/*
+	 * DIPM is enabled only for MIN_POWER as some devices
+	 * misbehave when the host NACKs transition to SLUMBER.  Order
+	 * device and link configurations such that the host always
+	 * allows DIPM requests.
+	 */
+	ata_for_each_dev(dev, link, ENABLED) {
+		bool hipm = ata_id_has_hipm(dev->id);
+		bool dipm = ata_id_has_dipm(dev->id) && !no_dipm;
+
+		/* find the first enabled and LPM enabled devices */
+		if (!link_dev)
+			link_dev = dev;
+
+		if (!lpm_dev && (hipm || dipm))
+			lpm_dev = dev;
+
+		hints &= ~ATA_LPM_EMPTY;
+		if (!hipm)
+			hints &= ~ATA_LPM_HIPM;
+
+		/* disable DIPM before changing link config */
+		if (policy < ATA_LPM_MED_POWER_WITH_DIPM && dipm) {
+			err_mask = ata_dev_set_feature(dev,
+					SETFEATURES_SATA_DISABLE, SATA_DIPM);
+			if (err_mask && err_mask != AC_ERR_DEV) {
+				ata_dev_warn(dev,
+					     "failed to disable DIPM, Emask 0x%x\n",
+					     err_mask);
+				rc = -EIO;
+				goto fail;
+			}
+		}
+	}
+
+	if (ap) {
+		rc = ap->ops->set_lpm(link, policy, hints);
+		if (!rc && ap->slave_link)
+			rc = ap->ops->set_lpm(ap->slave_link, policy, hints);
+	} else
+		rc = sata_pmp_set_lpm(link, policy, hints);
+
+	/*
+	 * Attribute link config failure to the first (LPM) enabled
+	 * device on the link.
+	 */
+	if (rc) {
+		if (rc == -EOPNOTSUPP) {
+			link->flags |= ATA_LFLAG_NO_LPM;
+			return 0;
+		}
+		dev = lpm_dev ? lpm_dev : link_dev;
+		goto fail;
+	}
+
+	/*
+	 * Low level driver acked the transition.  Issue DIPM command
+	 * with the new policy set.
+	 */
+	link->lpm_policy = policy;
+	if (ap && ap->slave_link)
+		ap->slave_link->lpm_policy = policy;
+
+	/* host config updated, enable DIPM if transitioning to MIN_POWER */
+	ata_for_each_dev(dev, link, ENABLED) {
+		if (policy >= ATA_LPM_MED_POWER_WITH_DIPM && !no_dipm &&
+		    ata_id_has_dipm(dev->id)) {
+			err_mask = ata_dev_set_feature(dev,
+					SETFEATURES_SATA_ENABLE, SATA_DIPM);
+			if (err_mask && err_mask != AC_ERR_DEV) {
+				ata_dev_warn(dev,
+					"failed to enable DIPM, Emask 0x%x\n",
+					err_mask);
+				rc = -EIO;
+				goto fail;
+			}
+		}
+	}
+
+	link->last_lpm_change = jiffies;
+	link->flags |= ATA_LFLAG_CHANGED;
+
+	return 0;
+
+fail:
+	/* restore the old policy */
+	link->lpm_policy = old_policy;
+	if (ap && ap->slave_link)
+		ap->slave_link->lpm_policy = old_policy;
+
+	/* if no device or only one more chance is left, disable LPM */
+	if (!dev || ehc->tries[dev->devno] <= 2) {
+		ata_link_warn(link, "disabling LPM on the link\n");
+		link->flags |= ATA_LFLAG_NO_LPM;
+	}
+	if (r_failed_dev)
+		*r_failed_dev = dev;
+	return rc;
+}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index b37e93c5013d..723645cefee9 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3208,139 +3208,6 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev)
 	return rc;
 }
 
-/**
- *	ata_eh_set_lpm - configure SATA interface power management
- *	@link: link to configure power management
- *	@policy: the link power management policy
- *	@r_failed_dev: out parameter for failed device
- *
- *	Enable SATA Interface power management.  This will enable
- *	Device Interface Power Management (DIPM) for min_power and
- *	medium_power_with_dipm policies, and then call driver specific
- *	callbacks for enabling Host Initiated Power management.
- *
- *	LOCKING:
- *	EH context.
- *
- *	RETURNS:
- *	0 on success, -errno on failure.
- */
-static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
-			  struct ata_device **r_failed_dev)
-{
-	struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
-	struct ata_eh_context *ehc = &link->eh_context;
-	struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
-	enum ata_lpm_policy old_policy = link->lpm_policy;
-	bool no_dipm = link->ap->flags & ATA_FLAG_NO_DIPM;
-	unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
-	unsigned int err_mask;
-	int rc;
-
-	/* if the link or host doesn't do LPM, noop */
-	if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
-		return 0;
-
-	/*
-	 * DIPM is enabled only for MIN_POWER as some devices
-	 * misbehave when the host NACKs transition to SLUMBER.  Order
-	 * device and link configurations such that the host always
-	 * allows DIPM requests.
-	 */
-	ata_for_each_dev(dev, link, ENABLED) {
-		bool hipm = ata_id_has_hipm(dev->id);
-		bool dipm = ata_id_has_dipm(dev->id) && !no_dipm;
-
-		/* find the first enabled and LPM enabled devices */
-		if (!link_dev)
-			link_dev = dev;
-
-		if (!lpm_dev && (hipm || dipm))
-			lpm_dev = dev;
-
-		hints &= ~ATA_LPM_EMPTY;
-		if (!hipm)
-			hints &= ~ATA_LPM_HIPM;
-
-		/* disable DIPM before changing link config */
-		if (policy < ATA_LPM_MED_POWER_WITH_DIPM && dipm) {
-			err_mask = ata_dev_set_feature(dev,
-					SETFEATURES_SATA_DISABLE, SATA_DIPM);
-			if (err_mask && err_mask != AC_ERR_DEV) {
-				ata_dev_warn(dev,
-					     "failed to disable DIPM, Emask 0x%x\n",
-					     err_mask);
-				rc = -EIO;
-				goto fail;
-			}
-		}
-	}
-
-	if (ap) {
-		rc = ap->ops->set_lpm(link, policy, hints);
-		if (!rc && ap->slave_link)
-			rc = ap->ops->set_lpm(ap->slave_link, policy, hints);
-	} else
-		rc = sata_pmp_set_lpm(link, policy, hints);
-
-	/*
-	 * Attribute link config failure to the first (LPM) enabled
-	 * device on the link.
-	 */
-	if (rc) {
-		if (rc == -EOPNOTSUPP) {
-			link->flags |= ATA_LFLAG_NO_LPM;
-			return 0;
-		}
-		dev = lpm_dev ? lpm_dev : link_dev;
-		goto fail;
-	}
-
-	/*
-	 * Low level driver acked the transition.  Issue DIPM command
-	 * with the new policy set.
-	 */
-	link->lpm_policy = policy;
-	if (ap && ap->slave_link)
-		ap->slave_link->lpm_policy = policy;
-
-	/* host config updated, enable DIPM if transitioning to MIN_POWER */
-	ata_for_each_dev(dev, link, ENABLED) {
-		if (policy >= ATA_LPM_MED_POWER_WITH_DIPM && !no_dipm &&
-		    ata_id_has_dipm(dev->id)) {
-			err_mask = ata_dev_set_feature(dev,
-					SETFEATURES_SATA_ENABLE, SATA_DIPM);
-			if (err_mask && err_mask != AC_ERR_DEV) {
-				ata_dev_warn(dev,
-					"failed to enable DIPM, Emask 0x%x\n",
-					err_mask);
-				rc = -EIO;
-				goto fail;
-			}
-		}
-	}
-
-	link->last_lpm_change = jiffies;
-	link->flags |= ATA_LFLAG_CHANGED;
-
-	return 0;
-
-fail:
-	/* restore the old policy */
-	link->lpm_policy = old_policy;
-	if (ap && ap->slave_link)
-		ap->slave_link->lpm_policy = old_policy;
-
-	/* if no device or only one more chance is left, disable LPM */
-	if (!dev || ehc->tries[dev->devno] <= 2) {
-		ata_link_warn(link, "disabling LPM on the link\n");
-		link->flags |= ATA_LFLAG_NO_LPM;
-	}
-	if (r_failed_dev)
-		*r_failed_dev = dev;
-	return rc;
-}
-
 int ata_link_nr_enabled(struct ata_link *link)
 {
 	struct ata_device *dev;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 2bb87a3e7a62..5860ad5f348e 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -220,6 +220,15 @@ extern int ata_ering_map(struct ata_ering *ering,
 extern unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key);
 extern unsigned int atapi_eh_request_sense(struct ata_device *dev,
 					   u8 *sense_buf, u8 dfl_sense_key);
+/* libata-eh-sata.c */
+#ifdef CONFIG_SATA_HOST
+int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+		   struct ata_device **r_failed_dev);
+#else
+static inline int ata_eh_set_lpm(struct ata_link *link,
+				 enum ata_lpm_policy policy,
+				 struct ata_device **r_failed_dev) { return 0; }
+#endif
 
 /* libata-pmp.c */
 #ifdef CONFIG_SATA_PMP
-- 
2.24.1