[PATCH 4.19 31/92] mmc: sdhci: fix minimum clock rate for v3 controller

[Greg Kroah-Hartman]

From: MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx>

commit 2a187d03352086e300daa2044051db00044cd171 upstream.

For SDHCIv3+ with programmable clock mode, minimal clock frequency is
still base clock / max(divider). Minimal programmable clock frequency is
always greater than minimal divided clock frequency. Without this patch,
SDHCI uses out-of-spec initial frequency when multiplier is big enough:

mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz
[for 480 MHz source clock divided by 1024]

The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode.

Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode")
Cc: <stable@xxxxxxxxxxxxxxx> # 4f6aa3264af4: mmc: tegra: Only advertise UHS modes if IO regulator is present
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@xxxxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/mmc/host/sdhci.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3700,11 +3700,13 @@ int sdhci_setup_host(struct sdhci_host *
 	if (host->ops->get_min_clock)
 		mmc->f_min = host->ops->get_min_clock(host);
 	else if (host->version >= SDHCI_SPEC_300) {
-		if (host->clk_mul) {
-			mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
+		if (host->clk_mul)
 			max_clk = host->max_clk * host->clk_mul;
-		} else
-			mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
+		/*
+		 * Divided Clock Mode minimum clock rate is always less than
+		 * Programmable Clock Mode minimum clock rate.
+		 */
+		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
 	} else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;