Re: [PATCH] brcmfmac: abort and release host after error

[Guenter Roeck]

On Tue, Jan 28, 2020 at 03:14:45PM -0800, Doug Anderson wrote:
> Hi,
> 
> On Tue, Jan 28, 2020 at 2:15 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
> >
> > With commit 216b44000ada ("brcmfmac: Fix use after free in
> > brcmf_sdio_readframes()") applied, we see locking timeouts in
> > brcmf_sdio_watchdog_thread().
> >
> > brcmfmac: brcmf_escan_timeout: timer expired
> > INFO: task brcmf_wdog/mmc1:621 blocked for more than 120 seconds.
> > Not tainted 4.19.94-07984-g24ff99a0f713 #1
> > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > brcmf_wdog/mmc1 D    0   621      2 0x00000000 last_sleep: 2440793077.  last_runnable: 2440766827
> > [<c0aa1e60>] (__schedule) from [<c0aa2100>] (schedule+0x98/0xc4)
> > [<c0aa2100>] (schedule) from [<c0853830>] (__mmc_claim_host+0x154/0x274)
> > [<c0853830>] (__mmc_claim_host) from [<bf10c5b8>] (brcmf_sdio_watchdog_thread+0x1b0/0x1f8 [brcmfmac])
> > [<bf10c5b8>] (brcmf_sdio_watchdog_thread [brcmfmac]) from [<c02570b8>] (kthread+0x178/0x180)
> >
> > In addition to restarting or exiting the loop, it is also necessary to
> > abort the command and to release the host.
> >
> > Fixes: 216b44000ada ("brcmfmac: Fix use after free in brcmf_sdio_readframes()")
> > Cc: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
> > Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > Cc: Brian Norris <briannorris@xxxxxxxxxxxx>
> > Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> > ---
> >  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> > index f9df95bc7fa1..2e1c23c7269d 100644
> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> > @@ -1938,6 +1938,8 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
> >                         if (brcmf_sdio_hdparse(bus, bus->rxhdr, &rd_new,
> >                                                BRCMF_SDIO_FT_NORMAL)) {
> >                                 rd->len = 0;
> > +                               brcmf_sdio_rxfail(bus, true, true);
> > +                               sdio_release_host(bus->sdiodev->func1);
> 
> I don't know much about this driver so I don't personally know if
> "true, true" is the correct thing to pass to brcmf_sdio_rxfail(), but
> it seems plausible.  Definitely the fix to call sdio_release_host() is
> sane.
> 
> Thus, unless someone knows for sure that brcmf_sdio_rxfail()'s
> parameters should be different:
> 
Actually, looking at brcmf_sdio_hdparse() and its other callers,
I think it may not be needed at all - other callers don't do it, and
there already are some calls to brcmf_sdio_rxfail() in that function.
It would be nice though to get a confirmation before I submit v2.

Guenter