Re: [PATCH v6 2/3] OPP: Add support for bandwidth OPP tables

[Sibi Sankar]

Hey Saravana,

On 2020-01-08 11:46, Saravana Kannan wrote:
> On Tue, Jan 7, 2020 at 11:28 AM Sibi Sankar <sibis@xxxxxxxxxxxxxx> 
> wrote:
> > Hey Saravana,
> >
> > Spent some time testing this series while
> > trying out dcvs on SDM845/SC7180. Apart from
> > the few minor issues it works quite well!
>
> Thanks a lot for testing Sibi. Can you give a tested-by? Glad to hear
> it works well.

sry missed this mail. Sure will
add Tested-by in the next revision.

> > On 2019-12-07 05:54, Saravana Kannan wrote:
> > > Not all devices quantify their performance points in terms of
> > > frequency.
> > > Devices like interconnects quantify their performance points in terms
> > > of
> > > bandwidth. We need a way to represent these bandwidth levels in OPP.
> > > So,
> > > add support for parsing bandwidth OPPs from DT.
> > >
> > > Signed-off-by: Saravana Kannan <saravanak@xxxxxxxxxx>
> > > ---
> > >  drivers/opp/core.c | 15 +++++++++--
> > >  drivers/opp/of.c   | 63 ++++++++++++++++++++++++++++++++--------------
> > >  drivers/opp/opp.h  |  5 ++++
> > >  3 files changed, 62 insertions(+), 21 deletions(-)
> > >
> > > diff --git a/drivers/opp/core.c b/drivers/opp/core.c
> > > index be7a7d332332..c79bbfac7289 100644
> > > --- a/drivers/opp/core.c
> > > +++ b/drivers/opp/core.c
> > > @@ -1282,11 +1282,21 @@ static bool
> > > _opp_supported_by_regulators(struct dev_pm_opp *opp,
> > >       return true;
> > >  }
> > >
> > > +int opp_compare_key(struct dev_pm_opp *opp1, struct dev_pm_opp *opp2)
> > > +{
> > > +     if (opp1->rate != opp2->rate)
> > > +             return opp1->rate < opp2->rate ? -1 : 1;
> > > +     if (opp1->peak_bw != opp2->peak_bw)
> > > +             return opp1->peak_bw < opp2->peak_bw ? -1 : 1;
> > > +     return 0;
> > > +}
> > > +
> > >  static int _opp_is_duplicate(struct device *dev, struct dev_pm_opp
> > > *new_opp,
> > >                            struct opp_table *opp_table,
> > >                            struct list_head **head)
> > >  {
> > >       struct dev_pm_opp *opp;
> > > +     int opp_cmp;
> > >
> > >       /*
> > >        * Insert new OPP in order of increasing frequency and discard if
> > > @@ -1297,12 +1307,13 @@ static int _opp_is_duplicate(struct device
> > > *dev, struct dev_pm_opp *new_opp,
> > >        * loop.
> > >        */
> > >       list_for_each_entry(opp, &opp_table->opp_list, node) {
> > > -             if (new_opp->rate > opp->rate) {
> > > +             opp_cmp = opp_compare_key(new_opp, opp);
> > > +             if (opp_cmp > 0) {
> > >                       *head = &opp->node;
> > >                       continue;
> > >               }
> > >
> > > -             if (new_opp->rate < opp->rate)
> > > +             if (opp_cmp < 0)
> > >                       return 0;
> > >
> > >               /* Duplicate OPPs */
> > > diff --git a/drivers/opp/of.c b/drivers/opp/of.c
> > > index 1cbb58240b80..b565da5a2b1f 100644
> > > --- a/drivers/opp/of.c
> > > +++ b/drivers/opp/of.c
> > > @@ -521,6 +521,44 @@ void dev_pm_opp_of_remove_table(struct device
> > > *dev)
> > >  }
> > >  EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
> > >
> > > +static int _read_opp_key(struct dev_pm_opp *new_opp, struct
> > > device_node *np,
> > > +                      bool *rate_not_available)
> > > +{
> > > +     int ret;
> > > +     u64 rate;
> > > +     u32 bw;
> > > +
> > > +     ret = of_property_read_u64(np, "opp-hz", &rate);
> > > +     if (!ret) {
> > > +             /*
> > > +              * Rate is defined as an unsigned long in clk API, and so
> > > +              * casting explicitly to its type. Must be fixed once rate is 64
> > > +              * bit guaranteed in clk API.
> > > +              */
> > > +             new_opp->rate = (unsigned long)rate;
> > > +             goto out;
> > > +     }
> > > +
> > > +     ret = of_property_read_u32(np, "opp-peak-kBps", &bw);
> > > +     if (!ret) {
> > > +             new_opp->peak_bw = bw;
> > > +
> > > +             if (!of_property_read_u32(np, "opp-avg-kBps", &bw))
> > > +                     new_opp->avg_bw = bw;
> > > +     }
> > > +
> > > +out:
> > > +     *rate_not_available = !!ret;
> > > +     /*
> > > +      * If ret is 0 at this point, we have already found a key. If we
> > > +      * haven't found a key yet, then ret already has an error value. In
> > > +      * either case, we don't need to update ret.
> > > +      */
> > > +     of_property_read_u32(np, "opp-level", &new_opp->level);
> > > +
> > > +     return ret;
> > > +}
> > > +
> > >  /**
> > >   * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT
> > > bindings)
> > >   * @opp_table:       OPP table
> > > @@ -558,26 +596,12 @@ static struct dev_pm_opp
> > > *_opp_add_static_v2(struct opp_table *opp_table,
> > >       if (!new_opp)
> > >               return ERR_PTR(-ENOMEM);
> > >
> > > -     ret = of_property_read_u64(np, "opp-hz", &rate);
> > > -     if (ret < 0) {
> > > -             /* "opp-hz" is optional for devices like power domains. */
> > > -             if (!opp_table->is_genpd) {
> > > -                     dev_err(dev, "%s: opp-hz not found\n", __func__);
> > > -                     goto free_opp;
> > > -             }
> > > -
> > > -             rate_not_available = true;
> > > -     } else {
> > > -             /*
> > > -              * Rate is defined as an unsigned long in clk API, and so
> > > -              * casting explicitly to its type. Must be fixed once rate is 64
> > > -              * bit guaranteed in clk API.
> > > -              */
> > > -             new_opp->rate = (unsigned long)rate;
> > > +     ret = _read_opp_key(new_opp, np, &rate_not_available);
> > > +     if (ret) {
> >
> > if (!opp_table->is_genpd) {
> >
> > _read_opp_key returns an error for genpd
> > opps so please check if it is a genpd
> > opp_table before erroring out here.
>
> Thanks. I'll fix it in the next version.
>
> > > +             dev_err(dev, "%s: opp key field not found\n", __func__);
> > > +             goto free_opp;
> > >       }
> > >
> > > -     of_property_read_u32(np, "opp-level", &new_opp->level);
> > > -
> > >       /* Check if the OPP supports hardware's hierarchy of versions or not
> > > */
> > >       if (!_opp_is_supported(dev, opp_table, np)) {
> > >               dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
> > > @@ -616,7 +640,8 @@ static struct dev_pm_opp
> > > *_opp_add_static_v2(struct opp_table *opp_table,
> > >       if (of_property_read_bool(np, "opp-suspend")) {
> > >               if (opp_table->suspend_opp) {
> > >                       /* Pick the OPP with higher rate as suspend OPP */
> > > -                     if (new_opp->rate > opp_table->suspend_opp->rate) {
> > > +                     if (opp_compare_key(new_opp,
> > > +                                         opp_table->suspend_opp) > 1) {
> >
> > shouldn't the condition be > 0?
>
> Duh. Thanks. I'll fix it in the next version.
>
> I'm guessing you tested with the fixes you pointed out?

yes

> -Saravana

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.