[PATCH v3 00/28] docs: i2c: rework I2C documentation, part I

[Luca Ceresoli]

Hi,

this series is a list of improvements to the I2C documentation.

It started as a simple reordering of index.rst from alphabetical order to a
logical order. Then it grew to a mixture of various improvements to each
section and some cross-section changes.

I wanted to rework all the sections in a unique series, but after covering
about one third of them the number of patches has already grown pretty long
so I'm sending it in its current state. I will continue to cover the rest
of the sections later.

Each patch is quite self-standing, and most are trivial, so have a good
reading.

v2 and v3 incorporate many improvements suggested by Jean Delvare and Peter
Rosin. A special thank you to Jean for his very patient and appreciated
review work of _all_ of the 26 patches. Thanks to his work the patches are
now 28. :) Patches 27 and 28 are the new ones.

Luca

Luca Ceresoli (28):
  docs: i2c: sort index logically
  docs: i2c: summary: extend introduction
  docs: i2c: summary: rewrite the "terminology" section
  docs: i2c: call it "I2C" consistently
  docs: i2c: fix typo
  docs: i2c: replace "I2C-transfer" -> "I2C transfer" consistently
  docs: i2c: i2c-protocol: fix kernel-doc function syntax
  docs: i2c: i2c-protocol: properly name start and stop conditions
  docs: i2c: i2c-protocol: remove unneeded colons from table
  docs: i2c: i2c-protocol: use proper names for ACK and NACK
  docs: i2c: smbus-protocol: fix link syntax
  docs: i2c: smbus-protocol: properly name start and stop conditions
  docs: i2c: smbus-protocol: remove unneeded colons from table
  docs: i2c: smbus-protocol: use proper names for ACK and NACK
  docs: i2c: smbus-protocol: enable kernel-doc function syntax
  docs: i2c: smbus-protocol: fix kernel-doc function syntax
  docs: i2c: smbus-protocol: fix typo
  docs: i2c: smbus-protocol: fix punctuation
  docs: i2c: smbus-protocol: improve I2C Block transactions description
  docs: i2c: instantiating-devices: fix internal hyperlink
  docs: i2c: instantiating-devices: rearrange static instatiation
  docs: i2c: instantiating-devices: use monospace for sysfs attributes
  docs: i2c: old-module-parameters: fix internal hyperlink
  docs: i2c: old-module-parameters: clarify this is for obsolete kernels
  docs: i2c: old-module-parameters: use monospace instead of ""
  docs: i2c: rename sections so the overall picture is clearer
  docs: i2c: i2c-protocol: use same wording as smbus-protocol
  docs: i2c: writing-clients: properly name the stop condition

 Documentation/i2c/dev-interface.rst         |   24 +-
 Documentation/i2c/dma-considerations.rst    |    2 +-
 Documentation/i2c/i2c-protocol.rst          |   45 +-
 Documentation/i2c/i2c-topology.rst          |   72 +-
 Documentation/i2c/i2c.svg                   | 1341 +++++++++++++++++++
 Documentation/i2c/index.rst                 |   58 +-
 Documentation/i2c/instantiating-devices.rst |  115 +-
 Documentation/i2c/old-module-parameters.rst |   31 +-
 Documentation/i2c/slave-interface.rst       |    4 +-
 Documentation/i2c/smbus-protocol.rst        |  107 +-
 Documentation/i2c/summary.rst               |   62 +-
 Documentation/i2c/writing-clients.rst       |   16 +-
 12 files changed, 1653 insertions(+), 224 deletions(-)
 create mode 100644 Documentation/i2c/i2c.svg

-- 
2.25.0