[PATCH V3 4/6] USB: serial: f81232: Add F81534A support

[Ji-Ze Hong (Peter Hong)]

The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device
and the serial port is default disabled when plugin computer.

The IC is contains devices as following:
	1. HUB (all devices is connected with this hub)
	2. GPIO/Control device. (enable serial port and control GPIOs)
	3. serial port 1 to x (2/4/8/12)

It's most same with F81232, the UART device is difference as follow:
	1. TX/RX bulk size is 128/512bytes
	2. RX bulk layout change:
		F81232: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]...
		F81534A:[LEN][Data.....][LSR]

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@xxxxxxxxx>
---
Changelog:
v3:
	1. Add prefix f81232 to original id_table[].
	2. Change all_serial_id_table[] to combined_id_table[].
	3. Remove non-used defines.
	4. Fix typos.
	5. Change some error message more reable.
	6. Change urb->actual_length to len in f81534a_process_read_urb().
	7. Remove f81534a_port_probe() and add it to next patch.

v2:
	1: Separate LSR handler to prior patch.
	2: Use tty_insert_flip_string_fixed_char() when not a console.
	3. Remove proxy function f81232_read_urb_proxy() and change it
	   to usb-serial subdriver.
	4. Change some error message more reable.

 drivers/usb/serial/f81232.c | 128 ++++++++++++++++++++++++++++++++++--
 1 file changed, 122 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index e080d678b0c2..df197c723273 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Fintek F81232 USB to serial adaptor driver
+ * Fintek F81532A/534A/535/536 USB to 2/4/8/12 serial adaptor driver
  *
  * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@xxxxxxxxxxxxxxxxxxx)
  * Copyright (C) 2012 Linux Foundation
@@ -21,11 +22,36 @@
 #include <linux/usb/serial.h>
 #include <linux/serial_reg.h>
 
-static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x1934, 0x0706) },
+#define F81232_ID		\
+	{ USB_DEVICE(0x1934, 0x0706) }	/* 1 port UART device */
+
+#define F81534A_SERIES_ID	\
+	{ USB_DEVICE(0x2c42, 0x1602) },	/* In-Box 2 port UART device */	\
+	{ USB_DEVICE(0x2c42, 0x1604) },	/* In-Box 4 port UART device */	\
+	{ USB_DEVICE(0x2c42, 0x1605) },	/* In-Box 8 port UART device */	\
+	{ USB_DEVICE(0x2c42, 0x1606) },	/* In-Box 12 port UART device */ \
+	{ USB_DEVICE(0x2c42, 0x1608) },	/* Non-Flash type */ \
+	{ USB_DEVICE(0x2c42, 0x1632) },	/* 2 port UART device */ \
+	{ USB_DEVICE(0x2c42, 0x1634) },	/* 4 port UART device */ \
+	{ USB_DEVICE(0x2c42, 0x1635) },	/* 8 port UART device */ \
+	{ USB_DEVICE(0x2c42, 0x1636) }	/* 12 port UART device */
+
+static const struct usb_device_id f81232_id_table[] = {
+	F81232_ID,
 	{ }					/* Terminating entry */
 };
-MODULE_DEVICE_TABLE(usb, id_table);
+
+static const struct usb_device_id f81534a_id_table[] = {
+	F81534A_SERIES_ID,
+	{ }					/* Terminating entry */
+};
+
+static const struct usb_device_id combined_id_table[] = {
+	F81232_ID,
+	F81534A_SERIES_ID,
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, combined_id_table);
 
 /* Maximum baudrate for F81232 */
 #define F81232_MAX_BAUDRATE		1500000
@@ -61,6 +87,11 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define F81232_CLK_14_77_MHZ		(BIT(1) | BIT(0))
 #define F81232_CLK_MASK			GENMASK(1, 0)
 
+#define F81534A_MODE_REG		0x107
+#define F81534A_TRIGGER_MASK		GENMASK(3, 2)
+#define F81534A_TRIGGER_MULTIPLE_4X	BIT(3)
+#define F81534A_FIFO_128BYTE		(BIT(1) | BIT(0))
+
 struct f81232_private {
 	struct mutex lock;
 	u8 modem_control;
@@ -383,6 +414,47 @@ static void f81232_process_read_urb(struct urb *urb)
 	tty_flip_buffer_push(&port->port);
 }
 
+static void f81534a_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	char tty_flag;
+	unsigned int i;
+	u8 lsr;
+	u8 len;
+
+	if (urb->actual_length < 3) {
+		dev_err(&port->dev, "short message received: %d\n",
+				urb->actual_length);
+		return;
+	}
+
+	len = data[0];
+	if (len != urb->actual_length) {
+		dev_err(&port->dev, "unexpected length: %d %d\n", len,
+				urb->actual_length);
+		return;
+	}
+
+	/* bulk-in data: [LEN][Data.....][LSR] */
+	lsr = data[len - 1];
+	tty_flag = f81232_handle_lsr(port, lsr);
+
+	if (port->port.console && port->sysrq) {
+		for (i = 1; i < len - 1; ++i) {
+			if (!usb_serial_handle_sysrq_char(port, data[i])) {
+				tty_insert_flip_char(&port->port, data[i],
+						tty_flag);
+			}
+		}
+	} else {
+		tty_insert_flip_string_fixed_flag(&port->port, &data[1],
+							tty_flag, len - 2);
+	}
+
+	tty_flip_buffer_push(&port->port);
+}
+
 static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -666,6 +738,24 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 	return 0;
 }
 
+static int f81534a_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	int status;
+	u8 mask;
+	u8 val;
+
+	val = F81534A_TRIGGER_MULTIPLE_4X | F81534A_FIFO_128BYTE;
+	mask = F81534A_TRIGGER_MASK | F81534A_FIFO_128BYTE;
+
+	status = f81232_set_mask_register(port, F81534A_MODE_REG, mask, val);
+	if (status) {
+		dev_err(&port->dev, "failed to set MODE_REG: %d\n", status);
+		return status;
+	}
+
+	return f81232_open(tty, port);
+}
+
 static void f81232_close(struct usb_serial_port *port)
 {
 	struct f81232_private *port_priv = usb_get_serial_port_data(port);
@@ -810,7 +900,7 @@ static struct usb_serial_driver f81232_device = {
 		.owner =	THIS_MODULE,
 		.name =		"f81232",
 	},
-	.id_table =		id_table,
+	.id_table =		f81232_id_table,
 	.num_ports =		1,
 	.bulk_in_size =		256,
 	.bulk_out_size =	256,
@@ -832,14 +922,40 @@ static struct usb_serial_driver f81232_device = {
 	.resume =		f81232_resume,
 };
 
+static struct usb_serial_driver f81534a_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"f81534a",
+	},
+	.id_table =		f81534a_id_table,
+	.num_ports =		1,
+	.open =			f81534a_open,
+	.close =		f81232_close,
+	.dtr_rts =		f81232_dtr_rts,
+	.carrier_raised =	f81232_carrier_raised,
+	.get_serial =		f81232_get_serial_info,
+	.break_ctl =		f81232_break_ctl,
+	.set_termios =		f81232_set_termios,
+	.tiocmget =		f81232_tiocmget,
+	.tiocmset =		f81232_tiocmset,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.tx_empty =		f81232_tx_empty,
+	.process_read_urb =	f81534a_process_read_urb,
+	.read_int_callback =	f81232_read_int_callback,
+	.port_probe =		f81232_port_probe,
+	.suspend =		f81232_suspend,
+	.resume =		f81232_resume,
+};
+
 static struct usb_serial_driver * const serial_drivers[] = {
 	&f81232_device,
+	&f81534a_device,
 	NULL,
 };
 
-module_usb_serial_driver(serial_drivers, id_table);
+module_usb_serial_driver(serial_drivers, combined_id_table);
 
-MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
+MODULE_DESCRIPTION("Fintek F81232/532A/534A/535/536 USB to serial driver");
 MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>");
 MODULE_AUTHOR("Peter Hong <peter_hong@xxxxxxxxxxxxx>");
 MODULE_LICENSE("GPL v2");
-- 
2.17.1