[PATCH -next 1/2] dmaengine: xilinx_dma: Extend dma_config structure to store max channel count

[Radhey Shyam Pandey]

Extend dma_config structure to store the max channel count. This input is
used to populate dma device channel nodes at the fixed offset. It serves
as a preparatory patch for removing dma channel DT node order dependency,
added in the subsequent commit.

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx>
---
 drivers/dma/xilinx/xilinx_dma.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 6f1539c..2281af3 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -125,7 +125,9 @@
 #define XILINX_VDMA_ENABLE_VERTICAL_FLIP	BIT(0)
 
 /* HW specific definitions */
-#define XILINX_DMA_MAX_CHANS_PER_DEVICE	0x20
+#define XILINX_MCDMA_MAX_CHANS_PER_DEVICE	0x20
+#define XILINX_DMA_MAX_CHANS_PER_DEVICE		0x2
+#define XILINX_CDMA_MAX_CHANS_PER_DEVICE	0x1
 
 #define XILINX_DMA_DMAXR_ALL_IRQ_MASK	\
 		(XILINX_DMA_DMASR_FRM_CNT_IRQ | \
@@ -468,6 +470,7 @@ struct xilinx_dma_config {
 			struct clk **tx_clk, struct clk **txs_clk,
 			struct clk **rx_clk, struct clk **rxs_clk);
 	irqreturn_t (*irq_handler)(int irq, void *data);
+	const int max_channels;
 };
 
 /**
@@ -2939,23 +2942,27 @@ static const struct xilinx_dma_config axidma_config = {
 	.dmatype = XDMA_TYPE_AXIDMA,
 	.clk_init = axidma_clk_init,
 	.irq_handler = xilinx_dma_irq_handler,
+	.max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
 };
 
 static const struct xilinx_dma_config aximcdma_config = {
 	.dmatype = XDMA_TYPE_AXIMCDMA,
 	.clk_init = axidma_clk_init,
 	.irq_handler = xilinx_mcdma_irq_handler,
+	.max_channels = XILINX_MCDMA_MAX_CHANS_PER_DEVICE,
 };
 static const struct xilinx_dma_config axicdma_config = {
 	.dmatype = XDMA_TYPE_CDMA,
 	.clk_init = axicdma_clk_init,
 	.irq_handler = xilinx_dma_irq_handler,
+	.max_channels = XILINX_CDMA_MAX_CHANS_PER_DEVICE,
 };
 
 static const struct xilinx_dma_config axivdma_config = {
 	.dmatype = XDMA_TYPE_VDMA,
 	.clk_init = axivdma_clk_init,
 	.irq_handler = xilinx_dma_irq_handler,
+	.max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
 };
 
 static const struct of_device_id xilinx_dma_of_ids[] = {
-- 
2.7.4