Re: [PATCH v4 3/5] iio: amplifiers: hmc425a: Add support for HMC425A attenuator

From: Jonathan Cameron
Date: Sun Feb 02 2020 - 05:53:16 EST

Next message: Jonathan Cameron: "Re: [PATCH v4 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator"
Previous message: Avi Shchislowski: "[PATCH 4/5] scsi: ufs-thermal: implement thermal file ops"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, 29 Jan 2020 16:22:59 +0200
Beniamin Bia <beniamin.bia@xxxxxxxxxx> wrote:

> This patch adds support for the HMC425A 0.5 dB LSB GaAs MMIC 6-BIT
> DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz.
>
> Datasheet:
> https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
>
> Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>

A few really small things I noticed whilst taking another quick look at this.
I'd probably just have tidied them up or let the go if I hadn't already
raised feedback on patch 1 :)

Thanks,

Jonathan

> ---
> drivers/iio/amplifiers/Kconfig | 10 ++
> drivers/iio/amplifiers/Makefile | 1 +
> drivers/iio/amplifiers/hmc425a.c | 256 +++++++++++++++++++++++++++++++
> 3 files changed, 267 insertions(+)
> create mode 100644 drivers/iio/amplifiers/hmc425a.c
>
> diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig
> index da7f126d197b..9b02c9a2bc8a 100644
> --- a/drivers/iio/amplifiers/Kconfig
> +++ b/drivers/iio/amplifiers/Kconfig
> @@ -22,4 +22,14 @@ config AD8366
> To compile this driver as a module, choose M here: the
> module will be called ad8366.
>
> +config HMC425
> + tristate "Analog Devices HMC425A and similar GPIO Gain Amplifiers"
> + depends on GPIOLIB
> + help
> + Say yes here to build support for Analog Devices HMC425A and similar
> + gain amplifiers or step attenuators.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called hmc425a.
> +
> endmenu
> diff --git a/drivers/iio/amplifiers/Makefile b/drivers/iio/amplifiers/Makefile
> index 9abef2ebe9bc..19a89db1d9b1 100644
> --- a/drivers/iio/amplifiers/Makefile
> +++ b/drivers/iio/amplifiers/Makefile
> @@ -5,3 +5,4 @@
>
> # When adding new entries keep the list in alphabetical order
> obj-$(CONFIG_AD8366) += ad8366.o
> +obj-$(CONFIG_HMC425) += hmc425a.o
> \ No newline at end of file
> diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c
> new file mode 100644
> index 000000000000..0a797e56df3d
> --- /dev/null
> +++ b/drivers/iio/amplifiers/hmc425a.c
> @@ -0,0 +1,256 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * HMC425A and similar Gain Amplifiers
> + *
> + * Copyright 2020 Analog Devices Inc.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/sysfs.h>
> +
> +enum hmc425a_type {
> + ID_HMC425A,
> +};
> +
> +struct hmc425a_chip_info {
> + const char *name;
> + const struct iio_chan_spec *channels;
> + unsigned int num_channels;
> + unsigned int num_gpios;
> + int gain_min;
> + int gain_max;
> + int default_gain;
> +};
> +
> +struct hmc425a_state {
> + struct regulator *reg;
> + struct mutex lock; /* protect sensor state */
> + struct hmc425a_chip_info *chip_info;
> + struct gpio_descs *gpios;
> + enum hmc425a_type type;
> + u32 gain;
> +};
> +
> +static int hmc425a_write(struct iio_dev *indio_dev, u32 value)
> +{
> + struct hmc425a_state *st = iio_priv(indio_dev);
> + DECLARE_BITMAP(values, BITS_PER_TYPE(value));
> +
> + values[0] = value;
> +
> + gpiod_set_array_value_cansleep(st->gpios->ndescs, st->gpios->desc,
> + NULL, values);
> + return 0;
> +}
> +
> +static int hmc425a_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long m)
> +{
> + struct hmc425a_state *st = iio_priv(indio_dev);
> + int code, gain = 0;
> + int ret;
> +
> + mutex_lock(&st->lock);
> + switch (m) {
> + case IIO_CHAN_INFO_HARDWAREGAIN:
> + code = st->gain;
> +
> + switch (st->type) {
> + case ID_HMC425A:
> + gain = ~code * -500;
> + break;
> + }
> +
> + *val = gain / 1000;
> + *val2 = (gain % 1000) * 1000;
> +
> + ret = IIO_VAL_INT_PLUS_MICRO_DB;
> + break;
> + default:
> + ret = -EINVAL;
> + }
> + mutex_unlock(&st->lock);
> +
> + return ret;
> +};
> +
> +static int hmc425a_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val,
> + int val2, long mask)
> +{
> + struct hmc425a_state *st = iio_priv(indio_dev);
> + struct hmc425a_chip_info *inf = st->chip_info;
> + int code = 0, gain;
> + int ret;
> +
> + if (val < 0)
> + gain = (val * 1000) - (val2 / 1000);
> + else
> + gain = (val * 1000) + (val2 / 1000);
> +
> + if (gain > inf->gain_max || gain < inf->gain_min)
> + return -EINVAL;
> +
> + switch (st->type) {
> + case ID_HMC425A:
> + code = ~((abs(gain) / 500) & 0x3F);
> + break;
> + }
> +
> + mutex_lock(&st->lock);
> + switch (mask) {
> + case IIO_CHAN_INFO_HARDWAREGAIN:
> + st->gain = code;
> +
> + ret = hmc425a_write(indio_dev, st->gain);
> + break;
> + default:
> + ret = -EINVAL;
> + }
> + mutex_unlock(&st->lock);
> +
> + return ret;
> +}
> +
> +static int hmc425a_write_raw_get_fmt(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + long mask)
> +{
> + switch (mask) {
> + case IIO_CHAN_INFO_HARDWAREGAIN:
> + return IIO_VAL_INT_PLUS_MICRO_DB;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct iio_info hmc425a_info = {
> + .read_raw = &hmc425a_read_raw,
> + .write_raw = &hmc425a_write_raw,
> + .write_raw_get_fmt = &hmc425a_write_raw_get_fmt,
> +};
> +
> +#define HMC425A_CHAN(_channel) \
> +{ \
> + .type = IIO_VOLTAGE, .output = 1, .indexed = 1, \

I'd rather see these on separate lines.
Not sure there are hard rules in the kernel for this particular case
but there are for normal initializers to say you shouldn't do

int a = 1, b = 2, c = 1; etc and this is kind of similar.

> + .channel = _channel, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
> +}
> +
> +static const struct iio_chan_spec hmc425a_channels[] = {
> + HMC425A_CHAN(0),
> +};
> +
> +/* Match table for of_platform binding */
> +static const struct of_device_id hmc425a_of_match[] = {
> + { .compatible = "adi,hmc425a", .data = (void *)ID_HMC425A },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, hmc425a_of_match);
> +
> +static void hmc425a_reg_disable(void *data)
> +{
> + struct hmc425a_state *st = data;
> +
> + regulator_disable(st->reg);
> +}
> +
> +static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = {
> + [ID_HMC425A] = {
> + .name = "hmc425a",
> + .channels = hmc425a_channels,
> + .num_channels = ARRAY_SIZE(hmc425a_channels),
> + .num_gpios = 6,
> + .gain_min = -31500,
> + .gain_max = 0,
> + .default_gain = -0x40, /* set default gain -31.5db*/
> + },
> +};
> +
> +static int hmc425a_probe(struct platform_device *pdev)
> +{
> + const struct of_device_id *id;
> + struct iio_dev *indio_dev;
> + struct hmc425a_state *st;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + st = iio_priv(indio_dev);
> + id = of_match_device(hmc425a_of_match, &pdev->dev);
> + if (!id)
> + ret = -ENODEV;
> +
> + st->type = (enum hmc425a_type)id->data;

of_device_get_match_data instead of of_match_device as we never
actually want the of_device_id itself.

> +
> + st->chip_info = &hmc425a_chip_info_tbl[st->type];
> + indio_dev->num_channels = st->chip_info->num_channels;
> + indio_dev->channels = st->chip_info->channels;
> + indio_dev->name = st->chip_info->name;
> + st->gain = st->chip_info->default_gain;
> +
> + st->gpios = devm_gpiod_get_array(&pdev->dev, "ctrl", GPIOD_OUT_LOW);
> + if (IS_ERR(st->gpios)) {
> + ret = PTR_ERR(st->gpios);
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "failed to get gpios\n");
> + return ret;
> + }
> +
> + if (st->gpios->ndescs != st->chip_info->num_gpios) {
> + dev_err(&pdev->dev, "%d GPIOs needed to operate\n",
> + st->chip_info->num_gpios);
> + return -ENODEV;
> + }
> +
> + st->reg = devm_regulator_get_optional(&pdev->dev, "vcc-supply");
> + if (IS_ERR(st->reg)) {
> + if (PTR_ERR(st->reg) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + st->reg = NULL;
> + } else {
> + ret = regulator_enable(st->reg);
> + if (ret)
> + return ret;
> + ret = devm_add_action_or_reset(&pdev->dev, hmc425a_reg_disable,
> + st);
> + if (ret)
> + return ret;
> + }
> +
> + mutex_init(&st->lock);
> +
> + indio_dev->dev.parent = &pdev->dev;
> + indio_dev->info = &hmc425a_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + return devm_iio_device_register(&pdev->dev, indio_dev);
> +}
> +
> +static struct platform_driver hmc425a_driver = {
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .of_match_table = hmc425a_of_match,
> + },
> + .probe = hmc425a_probe,
> +};
> +module_platform_driver(hmc425a_driver);
> +
> +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Analog Devices HMC425A and similar GPIO control Gain Amplifiers");
> +MODULE_LICENSE("GPL v2");

Next message: Jonathan Cameron: "Re: [PATCH v4 4/5] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator"
Previous message: Avi Shchislowski: "[PATCH 4/5] scsi: ufs-thermal: implement thermal file ops"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]