[PATCH 11/12] dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg'
From: Florian Fainelli
Date: Sun Feb 02 2020 - 16:19:28 EST
Consolidate and move the 'secondary-boot-reg' property from the 3
existing bindingn document into the main cpus.yaml documentation.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
.../arm/bcm/brcm,bcm11351-cpu-method.txt | 36 -----------------
.../arm/bcm/brcm,bcm23550-cpu-method.txt | 36 -----------------
.../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 -------------------
.../devicetree/bindings/arm/cpus.yaml | 16 ++++++++
4 files changed, 16 insertions(+), 111 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
deleted file mode 100644
index e3f996920403..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
- BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
- - enable-method = "brcm,bcm11351-cpu-method";
- - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU. The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x3500417c>;
- };
- };
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
deleted file mode 100644
index a3af54c0e404..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
- BCM23550
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
- - enable-method = "brcm,bcm23550";
- - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU. The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- enable-method = "brcm,bcm23550";
- secondary-boot-reg = <0x3500417c>;
- };
- };
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
deleted file mode 100644
index 677ef9d9f445..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom Northstar Plus SoC CPU Enable Method
----------------------------------------------
-This binding defines the enable method used for starting secondary
-CPU in the following Broadcom SoCs:
- BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
-
-The enable method is specified by defining the following required
-properties in the corresponding secondary "cpu" device tree node:
- - enable-method = "brcm,bcm-nsp-smp";
- - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register which should hold the common
-entry point for a secondary CPU. This entry is cpu node specific
-and should be added per cpu. E.g., in case of NSP (BCM58625) which
-is a dual core CPU SoC, this entry should be added to cpu1 node.
-
-
-Example:
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- enable-method = "brcm,bcm-nsp-smp";
- secondary-boot-reg = <0xffff042c>;
- reg = <1>;
- };
- };
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index c23c24ff7575..6f56a623c1cd 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -272,6 +272,22 @@ properties:
While optional, it is the preferred way to get access to
the cpu-core power-domains.
+ secondary-boot-reg:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: |
+ Required for systems that have an "enable-method" property value of
+ "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
+
+ This includes the following SoCs: |
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
+ BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+ The secondary-boot-reg property is a u32 value that specifies the
+ physical address of the register used to request the ROM holding pen
+ code release a secondary CPU. The value written to the register is
+ formed by encoding the target CPU id into the low bits of the
+ physical start address it should jump to.
+
required:
- device_type
- reg
--
2.17.1