[PATCH 4.9 05/68] USB: serial: ir-usb: fix link-speed handling

[Greg Kroah-Hartman]

From: Johan Hovold <johan@xxxxxxxxxx>

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream.

Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Cc: stable <stable@xxxxxxxxxxxxxxx>     # 2.6.27
Cc: Felipe Balbi <balbi@xxxxxxxxxx>
Reviewed-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/serial/ir-usb.c |   20 ++++++++++----------
 include/linux/usb/irda.h    |   13 ++++++++++++-
 2 files changed, 22 insertions(+), 11 deletions(-)

--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -336,34 +336,34 @@ static void ir_set_termios(struct tty_st
 
 	switch (baud) {
 	case 2400:
-		ir_baud = USB_IRDA_BR_2400;
+		ir_baud = USB_IRDA_LS_2400;
 		break;
 	case 9600:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		break;
 	case 19200:
-		ir_baud = USB_IRDA_BR_19200;
+		ir_baud = USB_IRDA_LS_19200;
 		break;
 	case 38400:
-		ir_baud = USB_IRDA_BR_38400;
+		ir_baud = USB_IRDA_LS_38400;
 		break;
 	case 57600:
-		ir_baud = USB_IRDA_BR_57600;
+		ir_baud = USB_IRDA_LS_57600;
 		break;
 	case 115200:
-		ir_baud = USB_IRDA_BR_115200;
+		ir_baud = USB_IRDA_LS_115200;
 		break;
 	case 576000:
-		ir_baud = USB_IRDA_BR_576000;
+		ir_baud = USB_IRDA_LS_576000;
 		break;
 	case 1152000:
-		ir_baud = USB_IRDA_BR_1152000;
+		ir_baud = USB_IRDA_LS_1152000;
 		break;
 	case 4000000:
-		ir_baud = USB_IRDA_BR_4000000;
+		ir_baud = USB_IRDA_LS_4000000;
 		break;
 	default:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		baud = 9600;
 	}
 
--- a/include/linux/usb/irda.h
+++ b/include/linux/usb/irda.h
@@ -118,11 +118,22 @@ struct usb_irda_cs_descriptor {
  * 6 - 115200 bps
  * 7 - 576000 bps
  * 8 - 1.152 Mbps
- * 9 - 5 mbps
+ * 9 - 4 Mbps
  * 10..15 - Reserved
  */
 #define USB_IRDA_STATUS_LINK_SPEED	0x0f
 
+#define USB_IRDA_LS_NO_CHANGE		0
+#define USB_IRDA_LS_2400		1
+#define USB_IRDA_LS_9600		2
+#define USB_IRDA_LS_19200		3
+#define USB_IRDA_LS_38400		4
+#define USB_IRDA_LS_57600		5
+#define USB_IRDA_LS_115200		6
+#define USB_IRDA_LS_576000		7
+#define USB_IRDA_LS_1152000		8
+#define USB_IRDA_LS_4000000		9
+
 /* The following is a 4-bit value used only for
  * outbound header:
  *