[PATCH v3 0/2] ACPI: APEI: Add support to notify the vendor specific HW errors
From: Shiju Jose
Date: Mon Feb 03 2020 - 11:51:56 EST
Presently the vendor drivers are unable to do the recovery for the
vendor specific recoverable HW errors, reported to the APEI driver
in the vendor defined sections, because APEI driver does not support
reporting the same to the vendor drivers.
This patch set
1. add an interface to the APEI driver to enable the vendor
drivers to register the event handling functions for the corresponding
vendor specific HW errors and report the error to the vendor driver.
2. add driver to handle HiSilicon hip08 PCIe controller's errors
which is an example application of the above APEI interface.
Changes:
V3:
1. Fix the comments from Bjorn Helgaas.
V2:
1. Changes in the HiSilicon PCIe controller's error handling driver
for the comments from Bjorn Helgaas.
2. Changes in the APEI interface to support reporting the vendor error
for module with multiple devices, but use the same section type.
In the error handler will use socket id/sub module id etc to distinguish
the device.
V1:
1. Fix comments from James Morse.
2. add driver to handle HiSilicon hip08 PCIe controller's errors,
which is an application of the above interface.
Shiju Jose (1):
ACPI: APEI: Add support to notify the vendor specific HW errors
Yicong Yang (1):
PCI: HIP: Add handling of HiSilicon HIP PCIe controller's errors
drivers/acpi/apei/ghes.c | 116 ++++++++++-
drivers/pci/controller/Kconfig | 8 +
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pcie-hisi-error.c | 334 +++++++++++++++++++++++++++++++
include/acpi/ghes.h | 56 ++++++
5 files changed, 510 insertions(+), 5 deletions(-)
create mode 100644 drivers/pci/controller/pcie-hisi-error.c
--
1.9.1