Re: [PATCH v2 21/28] mm: memcg/slab: use a single set of kmem_caches for all memory cgroups
From: Roman Gushchin
Date: Mon Feb 03 2020 - 23:36:17 EST
On Mon, Feb 03, 2020 at 09:47:04PM -0500, Johannes Weiner wrote:
> On Mon, Feb 03, 2020 at 05:15:05PM -0800, Roman Gushchin wrote:
> > On Mon, Feb 03, 2020 at 05:17:34PM -0500, Johannes Weiner wrote:
> > > On Mon, Feb 03, 2020 at 12:58:34PM -0800, Roman Gushchin wrote:
> > > > On Mon, Feb 03, 2020 at 02:50:48PM -0500, Johannes Weiner wrote:
> > > > > On Mon, Jan 27, 2020 at 09:34:46AM -0800, Roman Gushchin wrote:
> > > > > > This is fairly big but mostly red patch, which makes all non-root
> > > > > > slab allocations use a single set of kmem_caches instead of
> > > > > > creating a separate set for each memory cgroup.
> > > > > >
> > > > > > Because the number of non-root kmem_caches is now capped by the number
> > > > > > of root kmem_caches, there is no need to shrink or destroy them
> > > > > > prematurely. They can be perfectly destroyed together with their
> > > > > > root counterparts. This allows to dramatically simplify the
> > > > > > management of non-root kmem_caches and delete a ton of code.
> > > > >
> > > > > This is definitely going in the right direction. But it doesn't quite
> > > > > explain why we still need two sets of kmem_caches?
> > > > >
> > > > > In the old scheme, we had completely separate per-cgroup caches with
> > > > > separate slab pages. If a cgrouped process wanted to allocate a slab
> > > > > object, we'd go to the root cache and used the cgroup id to look up
> > > > > the right cgroup cache. On slab free we'd use page->slab_cache.
> > > > >
> > > > > Now we have slab pages that have a page->objcg array. Why can't all
> > > > > allocations go through a single set of kmem caches? If an allocation
> > > > > is coming from a cgroup and the slab page the allocator wants to use
> > > > > doesn't have an objcg array yet, we can allocate it on the fly, no?
> > > >
> > > > Well, arguably it can be done, but there are few drawbacks:
> > > >
> > > > 1) On the release path you'll need to make some extra work even for
> > > > root allocations: calculate the offset only to find the NULL objcg pointer.
> > > >
> > > > 2) There will be a memory overhead for root allocations
> > > > (which might or might not be compensated by the increase
> > > > of the slab utilization).
> > >
> > > Those two are only true if there is a wild mix of root and cgroup
> > > allocations inside the same slab, and that doesn't really happen in
> > > practice. Either the machine is dedicated to one workload and cgroups
> > > are only enabled due to e.g. a vendor kernel, or you have cgrouped
> > > systems (like most distro systems now) that cgroup everything.
> >
> > It's actually a questionable statement: we do skip allocations from certain
> > contexts, and we do merge slab caches.
> >
> > Most likely it's true for certain slab_caches and not true for others.
> > Think of kmalloc-* caches.
>
> With merging it's actually really hard to say how sparse or dense the
> resulting objcgroup arrays would be. It could change all the time too.
So here is some actual data from my dev machine. The first column is the number
of pages in the root cache, the second - in the corresponding memcg.
ext4_groupinfo_4k 1 0
rpc_inode_cache 1 0
fuse_request 62 0
fuse_inode 1 2732
btrfs_delayed_node 1192 0
btrfs_ordered_extent 129 0
btrfs_extent_map 8686 0
btrfs_extent_buffer 2648 0
btrfs_inode 12 6739
PINGv6 1 11
RAWv6 2 5
UDPv6 1 34
tw_sock_TCPv6 378 3
request_sock_TCPv6 24 0
TCPv6 46 74
mqueue_inode_cache 1 0
jbd2_journal_handle 2 0
jbd2_journal_head 2 0
jbd2_revoke_table_s 1 0
ext4_inode_cache 1 3
ext4_allocation_context 1 0
ext4_io_end 1 0
ext4_extent_status 5 0
mbcache 1 0
dnotify_struct 1 0
posix_timers_cache 24 0
xfrm_dst_cache 202 0
RAW 3 12
UDP 2 24
tw_sock_TCP 25 0
request_sock_TCP 24 0
TCP 7 24
hugetlbfs_inode_cache 2 0
dquot 2 0
eventpoll_pwq 1 119
dax_cache 1 0
request_queue 9 0
blkdev_ioc 241 0
biovec-max 112 0
biovec-128 2 0
biovec-64 6 0
khugepaged_mm_slot 248 0
dmaengine-unmap-256 1 0
dmaengine-unmap-128 1 0
dmaengine-unmap-16 39 0
sock_inode_cache 9 219
skbuff_ext_cache 249 0
skbuff_fclone_cache 83 0
skbuff_head_cache 138 141
file_lock_cache 24 0
net_namespace 1 5
shmem_inode_cache 14 56
task_delay_info 23 165
taskstats 24 0
proc_dir_entry 24 0
pde_opener 16 24
proc_inode_cache 24 1103
bdev_cache 4 20
kernfs_node_cache 1405 0
mnt_cache 54 0
filp 53 460
inode_cache 488 2287
dentry 367 10576
names_cache 24 0
ebitmap_node 2 0
avc_xperms_data 256 0
lsm_file_cache 92 0
buffer_head 24 9
uts_namespace 1 3
vm_area_struct 48 810
mm_struct 19 29
files_cache 14 26
signal_cache 28 143
sighand_cache 45 47
task_struct 77 430
cred_jar 29 424
anon_vma_chain 39 492
anon_vma 28 467
pid 30 369
Acpi-Operand 56 0
Acpi-Parse 5587 0
Acpi-State 4137 0
Acpi-Namespace 8 0
numa_policy 137 0
ftrace_event_field 68 0
pool_workqueue 25 0
radix_tree_node 1694 7776
task_group 21 0
vmap_area 477 0
kmalloc-rcl-512 473 0
kmalloc-rcl-256 605 0
kmalloc-rcl-192 43 16
kmalloc-rcl-128 1 47
kmalloc-rcl-96 3 229
kmalloc-rcl-64 6 611
kmalloc-8k 48 24
kmalloc-4k 372 59
kmalloc-2k 132 50
kmalloc-1k 251 82
kmalloc-512 360 150
kmalloc-256 237 0
kmalloc-192 298 24
kmalloc-128 203 24
kmalloc-96 112 24
kmalloc-64 796 24
kmalloc-32 1188 26
kmalloc-16 555 25
kmalloc-8 42 24
kmem_cache_node 20 0
kmem_cache 24 0
>
> > Also, because obj_cgroup vectors will not be freed without underlying pages,
> > most likely the percentage of pages with obj_cgroups will grow with uptime.
> > In other words, memcg allocations will fragment root slab pages.
>
> I understand the first part of this paragraph, but not the second. The
> objcgroup vectors will be freed when the slab pages get freed. But the
> partially filled slab pages can be reused by any types of allocations,
> surely? How would this cause the pages to fragment?
I mean the following: once you allocate a single accounted object
from the page, obj_cgroup vector is allocated and will be released only
with the slab page. We really really don't want to count how many accounted
objects are on the page and release obj_cgroup vector on reaching 0.
So even if all following allocations are root allocations, the overhead
will not go away with the uptime.
In other words, even a small percentage of accounted objects will
turn the whole cache into "accountable".
>
> > > > 3) I'm working on percpu memory accounting that resembles the same scheme,
> > > > except that obj_cgroups vector is created for the whole percpu block.
> > > > There will be root- and memcg-blocks, and it will be expensive to merge them.
> > > > I kinda like using the same scheme here and there.
> > >
> > > It's hard to conclude anything based on this information alone. If
> > > it's truly expensive to merge them, then it warrants the additional
> > > complexity. But I don't understand the desire to share a design for
> > > two systems with sufficiently different constraints.
> > >
> > > > Upsides?
> > > >
> > > > 1) slab utilization might increase a little bit (but I doubt it will have
> > > > a huge effect, because both merging sets should be relatively big and well
> > > > utilized)
> > >
> > > Right.
> > >
> > > > 2) eliminate memcg kmem_cache dynamic creation/destruction. it's nice,
> > > > but there isn't so much code left anyway.
> > >
> > > There is a lot of complexity associated with the cache cloning that
> > > isn't the lines of code, but the lifetime and synchronization rules.
> >
> > Quite opposite: the patchset removes all the complexity (or 90% of it),
> > because it makes the kmem_cache lifetime independent from any cgroup stuff.
> >
> > Kmem_caches are created on demand on the first request (most likely during
> > the system start-up), and destroyed together with their root counterparts
> > (most likely never or on rmmod). First request means globally first request,
> > not a first request from a given memcg.
> >
> > Memcg kmem_cache lifecycle has nothing to do with memory/obj_cgroups, and
> > after creation just matches the lifetime of the root kmem caches.
> >
> > The only reason to keep the async creation is that some kmem_caches
> > are created very early in the boot process, long before any cgroup
> > stuff is initialized.
>
> Yes, it's independent of the obj_cgroup and memcg, and yes it's
> simpler after your patches. But I'm not talking about the delta, I'm
> trying to understand the end result.
>
> And the truth is there is a decent chunk of code and tentacles spread
> throughout the slab/cgroup code to clone, destroy, and handle the
> split caches, as well as the branches/indirections on every cgrouped
> slab allocation.
Did you see the final code? It's fairly simple and there is really not
much of complexity left. If you don't think so, let's go into details,
because otherwise it's hard to say anything.
With a such change which basically removes the current implementation
and replaces it with a new one, it's hard to keep the balance between
making commits self-contained and small, but also showing the whole picture.
I'm fully open to questions and generally want to make it simpler.
I've tried to separate some parts and get them merged before the main
thing, but they haven't been merged yet, so I have to include them
to keep the thing building.
Will a more-detailed design in the cover help?
Will writing a design doc to put into Documentation/ help?
Is it better to rearrange patches in a way to eliminate the current
implementation first and build from scratch?
>
> Yet there is no good explanation for why things are done this way
> anywhere in the changelog, the cover letter, or the code. And it's
> hard to get a satisfying answer even to direct questions about it.
I do not agree. I try to answer all questions. But I also expect
that my arguments will be listened.
(I didn't answer questions re lifetime of obj_cgroup, but only
because I need some more time to think. If it wasn't clear, I'm sorry.).
>
> Forget about how anything was before your patches and put yourself
> into the shoes of somebody who comes at the new code without any
> previous knowledge. "It was even worse before" just isn't a satisfying
> answer.
Absolutely agree.
But at the same time "now it's better than before" sounds like a good
validation for a change. The code is never perfect.
But, please, let's don't go into long discussions here and save some time.
>
> > > And these two things are the primary aspects that make my head hurt
> > > trying to review this patch series.
> > >
> > > > So IMO it's an interesting direction to explore, but not something
> > > > that necessarily has to be done in the context of this patchset.
> > >
> > > I disagree. Instead of replacing the old coherent model and its
> > > complexities with a new coherent one, you are mixing the two. And I
> > > can barely understand the end result.
> > >
> > > Dynamically cloning entire slab caches for the sole purpose of telling
> > > whether the pages have an obj_cgroup array or not is *completely
> > > insane*. If the controller had followed the obj_cgroup design from the
> > > start, nobody would have ever thought about doing it like this.
> >
> > It's just not true. The whole point of having root- and memcg sets is
> > to be able to not look for a NULL pointer in the obj_cgroup vector on
> > releasing of the root object. In other words, it allows to keep zero
> > overhead for root allocations. IMHO it's an important thing, and calling
> > it *completely insane* isn't the best way to communicate.
>
> But you're trading it for the indirection of going through a separate
> kmem_cache for every single cgroup-accounted allocation. Why is this a
> preferable trade-off to make?
Because it allows to keep zero memory and cpu overhead for root allocations.
I've no data showing that this overhead is small and acceptable in all cases.
I think keeping zero overhead for root allocations is more important
than having a single set of kmem caches.
>
> I'm asking basic questions about your design choices. It's not okay to
> dismiss this with "it's an interesting direction to explore outside
> the context this patchset".
I'm not dismissing any questions.
There is a difference between a question and a must-to-follow suggestion,
which has known and ignored trade-offs.
>
> > > From a maintainability POV, we cannot afford merging it in this form.
> >
> > It sounds strange: the patchset eliminates 90% of the complexity,
> > but it's unmergeable because there are 10% left.
>
> No, it's unmergeable if you're unwilling to explain and document your
> design choices when somebody who is taking the time and effort to look
> at your patches doesn't understand why things are the way they are.
I'm not unwilling to explain. Otherwise I just wouldn't post it upstream,
right? And I assume you're spending your time reviewing it not with the goal
to keep the current code intact.
Please, let's keep separate things which are hard to understand and
require an explanation and things which you think are better done differently.
Both are valid and appreciated comments, but mixing them isn't productive.
>
> We are talking about 1500 lines of complicated core kernel code. They
> *have* to make sense to people other than you if we want to have this
> upstream.
Right.
>
> > I agree that it's an arguable question if we can tolerate some
> > additional overhead on root allocations to eliminate these additional
> > 10%, but I really don't think it's so obvious that even discussing
> > it is insane.
>
> Well that's exactly my point.
Ok, what's the acceptable performance penalty?
Is adding 20% on free path is acceptable, for example?
Or adding 3% of slab memory?
>
> > Btw, there is another good idea to explore (also suggested by Christopher
> > Lameter): we can put memcg/objcg pointer into the slab page, avoiding
> > an extra allocation.
>
> I agree with this idea, but I do think that's a bit more obviously in
> optimization territory. The objcg is much larger than a pointer to it,
> and it wouldn't significantly change the alloc/free sequence, right?
So the idea is that putting the obj_cgroup pointer nearby will eliminate
some cache misses. But then it's preferable to have two sets, because otherwise
there is a memory overhead from allocating an extra space for the objcg pointer.
Stepping a bit back: the new scheme (new slab controller) adds some cpu operations
on the allocation and release paths. It's unavoidable: more precise
accounting requires more CPU. But IMO it's worth it because it leads
to significant memory savings and reduced memory fragmentation.
Also it reduces the code complexity (which is a bonus but not the primary goal).
I haven't seen so far any workloads where the difference was noticeable,
but it doesn't mean they do not exist. That's why I'm very concerned about
any suggestions which might even in theory increase the cpu overhead.
Keeping it at zero level for root allocations allows do exclude
something from the accounting if the performance penalty is not tolerable.
Thanks!