Re: [PATCH 11/12] dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg'

[Florian Fainelli]

On 2/3/2020 12:34 AM, Maxime Ripard wrote:
> On Sun, Feb 02, 2020 at 01:18:26PM -0800, Florian Fainelli wrote:
>> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
>> index c23c24ff7575..6f56a623c1cd 100644
>> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
>> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
>> @@ -272,6 +272,22 @@ properties:
>>        While optional, it is the preferred way to get access to
>>        the cpu-core power-domains.
>>
>> +  secondary-boot-reg:
>> +    $ref: '/schemas/types.yaml#/definitions/uint32'
>> +    description: |
>> +      Required for systems that have an "enable-method" property value of
>> +      "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
>> +
>> +      This includes the following SoCs: |
>> +      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
>> +      BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
>> +
>> +      The secondary-boot-reg property is a u32 value that specifies the
>> +      physical address of the register used to request the ROM holding pen
>> +      code release a secondary CPU. The value written to the register is
>> +      formed by encoding the target CPU id into the low bits of the
>> +      physical start address it should jump to.
>> +
> 
> You can make the requirement explicit (and enforced by the schemas) using:
> 
> if:
>   properties:
>     enable-method:
>       contains:
>         enum:
> 	  - brcm,bcm11351-cpu-method
> 	  - brcm,bcm23550
> 	  - brcm,bcm-nsp-smp
> 
> then:
>   required:
>     - secondary-boot-reg

Thanks! That was exactly what I was looking for, it seems to be matching
a bit too greedily though:

  DTC     arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml
  CHECK   arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml
/home/ff944844/dev/linux/arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml:
cpu@0: 'secondary-boot-reg' is a required property
/home/ff944844/dev/linux/arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml:
cpu@1: 'secondary-boot-reg' is a required property
/home/ff944844/dev/linux/arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml:
cpu@2: 'secondary-boot-reg' is a required property
/home/ff944844/dev/linux/arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml:
cpu@3: 'secondary-boot-reg' is a required property
  DTC     arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dt.yaml

not sure why though as your example appears correct.
-- 
Florian