Re: [PATCH] drm/stm: ltdc: check number of endpoints

[Benjamin Gaignard]

Le jeu. 23 janv. 2020 Ã 10:51, Philippe CORNU <philippe.cornu@xxxxxx> a Ãcrit :
>
> Dear Yannick,
> Thank you for your patch,
>
> Acked-by: Philippe Cornu <philippe.cornu@xxxxxx>
>
> Philippe :-)
>
> On 1/21/20 11:14 AM, Yannick Fertre wrote:
> > Number of endpoints could exceed the fix value MAX_ENDPOINTS(2).
> > Instead of increase simply this value, the number of endpoint
> > could be read from device tree. Load sequence has been a little
> > rework to take care of several panel or bridge which can be
> > connected/disconnected or enable/disable.

This patch doesn't apply on drm-misc-next.
Yannick could you rebase is on top of drm-misc-next and resend it ?
Thanks,

Benjamin
> >
> > Signed-off-by: Yannick Fertrà <yannick.fertre@xxxxxx>
> > ---
> >   drivers/gpu/drm/stm/ltdc.c | 104 ++++++++++++++++++++++-----------------------
> >   1 file changed, 52 insertions(+), 52 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> > index c2815e8..dba8e7f 100644
> > --- a/drivers/gpu/drm/stm/ltdc.c
> > +++ b/drivers/gpu/drm/stm/ltdc.c
> > @@ -42,8 +42,6 @@
> >
> >   #define MAX_IRQ 4
> >
> > -#define MAX_ENDPOINTS 2
> > -
> >   #define HWVER_10200 0x010200
> >   #define HWVER_10300 0x010300
> >   #define HWVER_20101 0x020101
> > @@ -1190,36 +1188,20 @@ int ltdc_load(struct drm_device *ddev)
> >       struct ltdc_device *ldev = ddev->dev_private;
> >       struct device *dev = ddev->dev;
> >       struct device_node *np = dev->of_node;
> > -     struct drm_bridge *bridge[MAX_ENDPOINTS] = {NULL};
> > -     struct drm_panel *panel[MAX_ENDPOINTS] = {NULL};
> > +     struct drm_bridge *bridge;
> > +     struct drm_panel *panel;
> >       struct drm_crtc *crtc;
> >       struct reset_control *rstc;
> >       struct resource *res;
> > -     int irq, ret, i, endpoint_not_ready = -ENODEV;
> > +     int irq, i, nb_endpoints;
> > +     int ret = -ENODEV;
> >
> >       DRM_DEBUG_DRIVER("\n");
> >
> > -     /* Get endpoints if any */
> > -     for (i = 0; i < MAX_ENDPOINTS; i++) {
> > -             ret = drm_of_find_panel_or_bridge(np, 0, i, &panel[i],
> > -                                               &bridge[i]);
> > -
> > -             /*
> > -              * If at least one endpoint is -EPROBE_DEFER, defer probing,
> > -              * else if at least one endpoint is ready, continue probing.
> > -              */
> > -             if (ret == -EPROBE_DEFER)
> > -                     return ret;
> > -             else if (!ret)
> > -                     endpoint_not_ready = 0;
> > -     }
> > -
> > -     if (endpoint_not_ready)
> > -             return endpoint_not_ready;
> > -
> > -     rstc = devm_reset_control_get_exclusive(dev, NULL);
> > -
> > -     mutex_init(&ldev->err_lock);
> > +     /* Get number of endpoints */
> > +     nb_endpoints = of_graph_get_endpoint_count(np);
> > +     if (!nb_endpoints)
> > +             return -ENODEV;
> >
> >       ldev->pixel_clk = devm_clk_get(dev, "lcd");
> >       if (IS_ERR(ldev->pixel_clk)) {
> > @@ -1233,6 +1215,43 @@ int ltdc_load(struct drm_device *ddev)
> >               return -ENODEV;
> >       }
> >
> > +     /* Get endpoints if any */
> > +     for (i = 0; i < nb_endpoints; i++) {
> > +             ret = drm_of_find_panel_or_bridge(np, 0, i, &panel, &bridge);
> > +
> > +             /*
> > +              * If at least one endpoint is -ENODEV, continue probing,
> > +              * else if at least one endpoint returned an error
> > +              * (ie -EPROBE_DEFER) then stop probing.
> > +              */
> > +             if (ret == -ENODEV)
> > +                     continue;
> > +             else if (ret)
> > +                     goto err;
> > +
> > +             if (panel) {
> > +                     bridge = drm_panel_bridge_add_typed(panel,
> > +                                                         DRM_MODE_CONNECTOR_DPI);
> > +                     if (IS_ERR(bridge)) {
> > +                             DRM_ERROR("panel-bridge endpoint %d\n", i);
> > +                             ret = PTR_ERR(bridge);
> > +                             goto err;
> > +                     }
> > +             }
> > +
> > +             if (bridge) {
> > +                     ret = ltdc_encoder_init(ddev, bridge);
> > +                     if (ret) {
> > +                             DRM_ERROR("init encoder endpoint %d\n", i);
> > +                             goto err;
> > +                     }
> > +             }
> > +     }
> > +
> > +     rstc = devm_reset_control_get_exclusive(dev, NULL);
> > +
> > +     mutex_init(&ldev->err_lock);
> > +
> >       if (!IS_ERR(rstc)) {
> >               reset_control_assert(rstc);
> >               usleep_range(10, 20);
> > @@ -1268,7 +1287,6 @@ int ltdc_load(struct drm_device *ddev)
> >               }
> >       }
> >
> > -
> >       ret = ltdc_get_caps(ddev);
> >       if (ret) {
> >               DRM_ERROR("hardware identifier (0x%08x) not supported!\n",
> > @@ -1278,27 +1296,6 @@ int ltdc_load(struct drm_device *ddev)
> >
> >       DRM_DEBUG_DRIVER("ltdc hw version 0x%08x\n", ldev->caps.hw_version);
> >
> > -     /* Add endpoints panels or bridges if any */
> > -     for (i = 0; i < MAX_ENDPOINTS; i++) {
> > -             if (panel[i]) {
> > -                     bridge[i] = drm_panel_bridge_add_typed(panel[i],
> > -                                                            DRM_MODE_CONNECTOR_DPI);
> > -                     if (IS_ERR(bridge[i])) {
> > -                             DRM_ERROR("panel-bridge endpoint %d\n", i);
> > -                             ret = PTR_ERR(bridge[i]);
> > -                             goto err;
> > -                     }
> > -             }
> > -
> > -             if (bridge[i]) {
> > -                     ret = ltdc_encoder_init(ddev, bridge[i]);
> > -                     if (ret) {
> > -                             DRM_ERROR("init encoder endpoint %d\n", i);
> > -                             goto err;
> > -                     }
> > -             }
> > -     }
> > -
> >       crtc = devm_kzalloc(dev, sizeof(*crtc), GFP_KERNEL);
> >       if (!crtc) {
> >               DRM_ERROR("Failed to allocate crtc\n");
> > @@ -1331,8 +1328,8 @@ int ltdc_load(struct drm_device *ddev)
> >
> >       return 0;
> >   err:
> > -     for (i = 0; i < MAX_ENDPOINTS; i++)
> > -             drm_panel_bridge_remove(bridge[i]);
> > +     for (i = 0; i < nb_endpoints; i++)
> > +             drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
> >
> >       clk_disable_unprepare(ldev->pixel_clk);
> >
> > @@ -1341,11 +1338,14 @@ int ltdc_load(struct drm_device *ddev)
> >
> >   void ltdc_unload(struct drm_device *ddev)
> >   {
> > -     int i;
> > +     struct device *dev = ddev->dev;
> > +     int nb_endpoints, i;
> >
> >       DRM_DEBUG_DRIVER("\n");
> >
> > -     for (i = 0; i < MAX_ENDPOINTS; i++)
> > +     nb_endpoints = of_graph_get_endpoint_count(dev->of_node);
> > +
> > +     for (i = 0; i < nb_endpoints; i++)
> >               drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
> >
> >       pm_runtime_disable(ddev->dev);
> >
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel