Re: Linux 4.9.213

From: Greg KH
Date: Wed Feb 05 2020 - 09:44:36 EST

Next message: Qais Yousef: "Re: [PATCH v2] sched: rt: Make RT capacity aware"
Previous message: Greg KH: "Linux 4.9.213"
In reply to: Greg KH: "Linux 4.9.213"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

diff --git a/Makefile b/Makefile
index b6c05e99814e..de79c801abcd 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 4
PATCHLEVEL = 9
-SUBLEVEL = 212
+SUBLEVEL = 213
EXTRAVERSION =
NAME = Roaring Lionus

diff --git a/arch/arc/plat-eznps/Kconfig b/arch/arc/plat-eznps/Kconfig
index 1d175cc6ad6d..86f844caa405 100644
--- a/arch/arc/plat-eznps/Kconfig
+++ b/arch/arc/plat-eznps/Kconfig
@@ -7,7 +7,7 @@ menuconfig ARC_PLAT_EZNPS
bool "\"EZchip\" ARC dev platform"
select ARC_HAS_COH_CACHES if SMP
select CPU_BIG_ENDIAN
- select CLKSRC_NPS
+ select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
select EZNPS_GIC
select EZCHIP_NPS_MANAGEMENT_ENET if ETHERNET
help
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 78bee26361f1..552de167f95f 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -27,6 +27,27 @@
reg = <0x0 0x80000000 0x0 0x80000000>;
};

+ main_12v0: fixedregulator-main_12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "main_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_5v0: fixedregulator-evm_5v0 {
+ /* Output of TPS54531D */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vdd_3v3: fixedregulator-vdd_3v3 {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index 1f012c506434..cd3414898d10 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -16,7 +16,7 @@

OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S

-targets := Image Image.gz
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo

$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
index e1a961f05dcd..baa0c503e741 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -63,6 +63,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe1000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy0: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
index c288f3c6c637..93095600e808 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -60,6 +60,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf1000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy6: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
index 94f3e7175012..ff4bd38f0645 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -63,6 +63,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe3000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy1: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
index 94a76982d214..1fa38ed6f59e 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -60,6 +60,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf3000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy7: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
index b5ff5f71c6b8..a8cc9780c0c4 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe1000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy0: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
index ee44182c6348..8b8bd70c9382 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe3000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy1: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
index f05f0d775039..619c880b54d8 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe5000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy2: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
index a9114ec51075..d7ebb73a400d 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe7000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy3: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
index 44dd00ac7367..b151d696a069 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe9000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy4: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
index 5b1b84b58602..adc0ae0013a3 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xeb000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy5: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
index 0e1daaef9e74..435047e0e250 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -60,6 +60,7 @@ fman@500000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf1000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy14: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
index 68c5ef779266..c098657cca0a 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -60,6 +60,7 @@ fman@500000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xf3000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy15: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
index 605363cc1117..9d06824815f3 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe1000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy8: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
index 1955dfa13634..70e947730c4b 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe3000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy9: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
index 2c1476454ee0..ad96e6529595 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe5000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy10: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
index b8b541ff5fb0..034bc4b71f7a 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe7000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy11: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
index 4b2cfddd1b15..93ca23d82b39 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xe9000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy12: ethernet-phy@0 {
reg = <0x0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
index 0a52ddf7cc17..23b3117a2fd2 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xeb000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */

pcsphy13: ethernet-phy@0 {
reg = <0x0>;
diff --git a/crypto/af_alg.c b/crypto/af_alg.c
index b5953f1d1a18..cf3975ee4fd8 100644
--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -136,11 +136,13 @@ void af_alg_release_parent(struct sock *sk)
sk = ask->parent;
ask = alg_sk(sk);

- lock_sock(sk);
+ local_bh_disable();
+ bh_lock_sock(sk);
ask->nokey_refcnt -= nokey;
if (!last)
last = !--ask->refcnt;
- release_sock(sk);
+ bh_unlock_sock(sk);
+ local_bh_enable();

if (last)
sock_put(sk);
diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c
index a5718c0a3dc4..1348541da463 100644
--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -505,11 +505,12 @@ static int __init pcrypt_init(void)

static void __exit pcrypt_exit(void)
{
+ crypto_unregister_template(&pcrypt_tmpl);
+
pcrypt_fini_padata(&pencrypt);
pcrypt_fini_padata(&pdecrypt);

kset_unregister(pcrypt_kset);
- crypto_unregister_template(&pcrypt_tmpl);
}

module_init(pcrypt_init);
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 40c2d561417b..88819409e0be 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -372,7 +372,7 @@ static int do_rx_dma(struct atm_vcc *vcc,struct sk_buff *skb,
here = (eni_vcc->descr+skip) & (eni_vcc->words-1);
dma[j++] = (here << MID_DMA_COUNT_SHIFT) | (vcc->vci
<< MID_DMA_VCI_SHIFT) | MID_DT_JK;
- j++;
+ dma[j++] = 0;
}
here = (eni_vcc->descr+size+skip) & (eni_vcc->words-1);
if (!eff) size += skip;
@@ -445,7 +445,7 @@ static int do_rx_dma(struct atm_vcc *vcc,struct sk_buff *skb,
if (size != eff) {
dma[j++] = (here << MID_DMA_COUNT_SHIFT) |
(vcc->vci << MID_DMA_VCI_SHIFT) | MID_DT_JK;
- j++;
+ dma[j++] = 0;
}
if (!j || j > 2*RX_DMA_BUF) {
printk(KERN_CRIT DEV_LABEL "!j or j too big!!!\n");
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 67549ce88cc9..774748497ace 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -18,10 +18,11 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/module.h>
+#include <linux/spinlock.h>

struct ttyprintk_port {
struct tty_port port;
- struct mutex port_write_mutex;
+ spinlock_t spinlock;
};

static struct ttyprintk_port tpk_port;
@@ -100,11 +101,12 @@ static int tpk_open(struct tty_struct *tty, struct file *filp)
static void tpk_close(struct tty_struct *tty, struct file *filp)
{
struct ttyprintk_port *tpkp = tty->driver_data;
+ unsigned long flags;

- mutex_lock(&tpkp->port_write_mutex);
+ spin_lock_irqsave(&tpkp->spinlock, flags);
/* flush tpk_printk buffer */
tpk_printk(NULL, 0);
- mutex_unlock(&tpkp->port_write_mutex);
+ spin_unlock_irqrestore(&tpkp->spinlock, flags);

tty_port_close(&tpkp->port, tty, filp);
}
@@ -116,13 +118,14 @@ static int tpk_write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
struct ttyprintk_port *tpkp = tty->driver_data;
+ unsigned long flags;
int ret;

/* exclusive use of tpk_printk within this tty */
- mutex_lock(&tpkp->port_write_mutex);
+ spin_lock_irqsave(&tpkp->spinlock, flags);
ret = tpk_printk(buf, count);
- mutex_unlock(&tpkp->port_write_mutex);
+ spin_unlock_irqrestore(&tpkp->spinlock, flags);

return ret;
}
@@ -172,7 +175,7 @@ static int __init ttyprintk_init(void)
{
int ret = -ENOMEM;

- mutex_init(&tpk_port.port_write_mutex);
+ spin_lock_init(&tpk_port.spinlock);

ttyprintk_driver = tty_alloc_driver(1,
TTY_DRIVER_RESET_TERMIOS |
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 061a9f10218b..20cfdf837bfa 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -134,7 +134,7 @@ static DEFINE_SPINLOCK(ssp3_lock);
static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};

static DEFINE_SPINLOCK(timer_lock);
-static const char *timer_parent_names[] = {"clk32", "vctcxo_2", "vctcxo_4", "vctcxo"};
+static const char *timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};

static DEFINE_SPINLOCK(reset_lock);

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b992badb99dd..5d097d631e39 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -920,6 +920,7 @@ config GPIO_LP873X
config GPIO_MAX77620
tristate "GPIO support for PMIC MAX77620 and MAX20024"
depends on MFD_MAX77620
+ select GPIOLIB_IRQCHIP
help
GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor.
MAX77620 PMIC has 8 pins that can be configured as GPIOs. The
diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h
index a5c5c4e29add..48923ae6ac3b 100644
--- a/drivers/iio/gyro/st_gyro.h
+++ b/drivers/iio/gyro/st_gyro.h
@@ -19,6 +19,7 @@
#define LSM330DL_GYRO_DEV_NAME "lsm330dl_gyro"
#define LSM330DLC_GYRO_DEV_NAME "lsm330dlc_gyro"
#define L3GD20_GYRO_DEV_NAME "l3gd20"
+#define L3GD20H_GYRO_DEV_NAME "l3gd20h"
#define L3G4IS_GYRO_DEV_NAME "l3g4is_ui"
#define LSM330_GYRO_DEV_NAME "lsm330_gyro"
#define LSM9DS0_GYRO_DEV_NAME "lsm9ds0_gyro"
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index aea034d8fe0f..e366422e8512 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -35,83 +35,11 @@
#define ST_GYRO_DEFAULT_OUT_Z_L_ADDR 0x2c

/* FULLSCALE */
+#define ST_GYRO_FS_AVL_245DPS 245
#define ST_GYRO_FS_AVL_250DPS 250
#define ST_GYRO_FS_AVL_500DPS 500
#define ST_GYRO_FS_AVL_2000DPS 2000

-/* CUSTOM VALUES FOR SENSOR 1 */
-#define ST_GYRO_1_WAI_EXP 0xd3
-#define ST_GYRO_1_ODR_ADDR 0x20
-#define ST_GYRO_1_ODR_MASK 0xc0
-#define ST_GYRO_1_ODR_AVL_100HZ_VAL 0x00
-#define ST_GYRO_1_ODR_AVL_200HZ_VAL 0x01
-#define ST_GYRO_1_ODR_AVL_400HZ_VAL 0x02
-#define ST_GYRO_1_ODR_AVL_800HZ_VAL 0x03
-#define ST_GYRO_1_PW_ADDR 0x20
-#define ST_GYRO_1_PW_MASK 0x08
-#define ST_GYRO_1_FS_ADDR 0x23
-#define ST_GYRO_1_FS_MASK 0x30
-#define ST_GYRO_1_FS_AVL_250_VAL 0x00
-#define ST_GYRO_1_FS_AVL_500_VAL 0x01
-#define ST_GYRO_1_FS_AVL_2000_VAL 0x02
-#define ST_GYRO_1_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
-#define ST_GYRO_1_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
-#define ST_GYRO_1_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
-#define ST_GYRO_1_BDU_ADDR 0x23
-#define ST_GYRO_1_BDU_MASK 0x80
-#define ST_GYRO_1_DRDY_IRQ_ADDR 0x22
-#define ST_GYRO_1_DRDY_IRQ_INT2_MASK 0x08
-#define ST_GYRO_1_MULTIREAD_BIT true
-
-/* CUSTOM VALUES FOR SENSOR 2 */
-#define ST_GYRO_2_WAI_EXP 0xd4
-#define ST_GYRO_2_ODR_ADDR 0x20
-#define ST_GYRO_2_ODR_MASK 0xc0
-#define ST_GYRO_2_ODR_AVL_95HZ_VAL 0x00
-#define ST_GYRO_2_ODR_AVL_190HZ_VAL 0x01
-#define ST_GYRO_2_ODR_AVL_380HZ_VAL 0x02
-#define ST_GYRO_2_ODR_AVL_760HZ_VAL 0x03
-#define ST_GYRO_2_PW_ADDR 0x20
-#define ST_GYRO_2_PW_MASK 0x08
-#define ST_GYRO_2_FS_ADDR 0x23
-#define ST_GYRO_2_FS_MASK 0x30
-#define ST_GYRO_2_FS_AVL_250_VAL 0x00
-#define ST_GYRO_2_FS_AVL_500_VAL 0x01
-#define ST_GYRO_2_FS_AVL_2000_VAL 0x02
-#define ST_GYRO_2_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
-#define ST_GYRO_2_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
-#define ST_GYRO_2_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
-#define ST_GYRO_2_BDU_ADDR 0x23
-#define ST_GYRO_2_BDU_MASK 0x80
-#define ST_GYRO_2_DRDY_IRQ_ADDR 0x22
-#define ST_GYRO_2_DRDY_IRQ_INT2_MASK 0x08
-#define ST_GYRO_2_MULTIREAD_BIT true
-
-/* CUSTOM VALUES FOR SENSOR 3 */
-#define ST_GYRO_3_WAI_EXP 0xd7
-#define ST_GYRO_3_ODR_ADDR 0x20
-#define ST_GYRO_3_ODR_MASK 0xc0
-#define ST_GYRO_3_ODR_AVL_95HZ_VAL 0x00
-#define ST_GYRO_3_ODR_AVL_190HZ_VAL 0x01
-#define ST_GYRO_3_ODR_AVL_380HZ_VAL 0x02
-#define ST_GYRO_3_ODR_AVL_760HZ_VAL 0x03
-#define ST_GYRO_3_PW_ADDR 0x20
-#define ST_GYRO_3_PW_MASK 0x08
-#define ST_GYRO_3_FS_ADDR 0x23
-#define ST_GYRO_3_FS_MASK 0x30
-#define ST_GYRO_3_FS_AVL_250_VAL 0x00
-#define ST_GYRO_3_FS_AVL_500_VAL 0x01
-#define ST_GYRO_3_FS_AVL_2000_VAL 0x02
-#define ST_GYRO_3_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
-#define ST_GYRO_3_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
-#define ST_GYRO_3_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
-#define ST_GYRO_3_BDU_ADDR 0x23
-#define ST_GYRO_3_BDU_MASK 0x80
-#define ST_GYRO_3_DRDY_IRQ_ADDR 0x22
-#define ST_GYRO_3_DRDY_IRQ_INT2_MASK 0x08
-#define ST_GYRO_3_MULTIREAD_BIT true
-
-
static const struct iio_chan_spec st_gyro_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -130,7 +58,7 @@ static const struct iio_chan_spec st_gyro_16bit_channels[] = {

static const struct st_sensor_settings st_gyro_sensors_settings[] = {
{
- .wai = ST_GYRO_1_WAI_EXP,
+ .wai = 0xd3,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = L3G4200D_GYRO_DEV_NAME,
@@ -138,18 +66,18 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
- .addr = ST_GYRO_1_ODR_ADDR,
- .mask = ST_GYRO_1_ODR_MASK,
+ .addr = 0x20,
+ .mask = 0xc0,
.odr_avl = {
- { 100, ST_GYRO_1_ODR_AVL_100HZ_VAL, },
- { 200, ST_GYRO_1_ODR_AVL_200HZ_VAL, },
- { 400, ST_GYRO_1_ODR_AVL_400HZ_VAL, },
- { 800, ST_GYRO_1_ODR_AVL_800HZ_VAL, },
+ { .hz = 100, .value = 0x00, },
+ { .hz = 200, .value = 0x01, },
+ { .hz = 400, .value = 0x02, },
+ { .hz = 800, .value = 0x03, },
},
},
.pw = {
- .addr = ST_GYRO_1_PW_ADDR,
- .mask = ST_GYRO_1_PW_MASK,
+ .addr = 0x20,
+ .mask = 0x08,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
@@ -158,33 +86,33 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
- .addr = ST_GYRO_1_FS_ADDR,
- .mask = ST_GYRO_1_FS_MASK,
+ .addr = 0x23,
+ .mask = 0x30,
.fs_avl = {
[0] = {
.num = ST_GYRO_FS_AVL_250DPS,
- .value = ST_GYRO_1_FS_AVL_250_VAL,
- .gain = ST_GYRO_1_FS_AVL_250_GAIN,
+ .value = 0x00,
+ .gain = IIO_DEGREE_TO_RAD(8750),
},
[1] = {
.num = ST_GYRO_FS_AVL_500DPS,
- .value = ST_GYRO_1_FS_AVL_500_VAL,
- .gain = ST_GYRO_1_FS_AVL_500_GAIN,
+ .value = 0x01,
+ .gain = IIO_DEGREE_TO_RAD(17500),
},
[2] = {
.num = ST_GYRO_FS_AVL_2000DPS,
- .value = ST_GYRO_1_FS_AVL_2000_VAL,
- .gain = ST_GYRO_1_FS_AVL_2000_GAIN,
+ .value = 0x02,
+ .gain = IIO_DEGREE_TO_RAD(70000),
},
},
},
.bdu = {
- .addr = ST_GYRO_1_BDU_ADDR,
- .mask = ST_GYRO_1_BDU_MASK,
+ .addr = 0x23,
+ .mask = 0x80,
},
.drdy_irq = {
- .addr = ST_GYRO_1_DRDY_IRQ_ADDR,
- .mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK,
+ .addr = 0x22,
+ .mask_int2 = 0x08,
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
@@ -192,11 +120,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
*/
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
- .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
+ .multi_read_bit = true,
.bootime = 2,
},
{
- .wai = ST_GYRO_2_WAI_EXP,
+ .wai = 0xd4,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = L3GD20_GYRO_DEV_NAME,
@@ -208,18 +136,18 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
- .addr = ST_GYRO_2_ODR_ADDR,
- .mask = ST_GYRO_2_ODR_MASK,
+ .addr = 0x20,
+ .mask = 0xc0,
.odr_avl = {
- { 95, ST_GYRO_2_ODR_AVL_95HZ_VAL, },
- { 190, ST_GYRO_2_ODR_AVL_190HZ_VAL, },
- { 380, ST_GYRO_2_ODR_AVL_380HZ_VAL, },
- { 760, ST_GYRO_2_ODR_AVL_760HZ_VAL, },
+ { .hz = 95, .value = 0x00, },
+ { .hz = 190, .value = 0x01, },
+ { .hz = 380, .value = 0x02, },
+ { .hz = 760, .value = 0x03, },
},
},
.pw = {
- .addr = ST_GYRO_2_PW_ADDR,
- .mask = ST_GYRO_2_PW_MASK,
+ .addr = 0x20,
+ .mask = 0x08,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
@@ -228,33 +156,33 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
- .addr = ST_GYRO_2_FS_ADDR,
- .mask = ST_GYRO_2_FS_MASK,
+ .addr = 0x23,
+ .mask = 0x30,
.fs_avl = {
[0] = {
.num = ST_GYRO_FS_AVL_250DPS,
- .value = ST_GYRO_2_FS_AVL_250_VAL,
- .gain = ST_GYRO_2_FS_AVL_250_GAIN,
+ .value = 0x00,
+ .gain = IIO_DEGREE_TO_RAD(8750),
},
[1] = {
.num = ST_GYRO_FS_AVL_500DPS,
- .value = ST_GYRO_2_FS_AVL_500_VAL,
- .gain = ST_GYRO_2_FS_AVL_500_GAIN,
+ .value = 0x01,
+ .gain = IIO_DEGREE_TO_RAD(17500),
},
[2] = {
.num = ST_GYRO_FS_AVL_2000DPS,
- .value = ST_GYRO_2_FS_AVL_2000_VAL,
- .gain = ST_GYRO_2_FS_AVL_2000_GAIN,
+ .value = 0x02,
+ .gain = IIO_DEGREE_TO_RAD(70000),
},
},
},
.bdu = {
- .addr = ST_GYRO_2_BDU_ADDR,
- .mask = ST_GYRO_2_BDU_MASK,
+ .addr = 0x23,
+ .mask = 0x80,
},
.drdy_irq = {
- .addr = ST_GYRO_2_DRDY_IRQ_ADDR,
- .mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK,
+ .addr = 0x22,
+ .mask_int2 = 0x08,
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
@@ -262,29 +190,29 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
*/
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
- .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
+ .multi_read_bit = true,
.bootime = 2,
},
{
- .wai = ST_GYRO_3_WAI_EXP,
+ .wai = 0xd7,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
- [0] = L3GD20_GYRO_DEV_NAME,
+ [0] = L3GD20H_GYRO_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
- .addr = ST_GYRO_3_ODR_ADDR,
- .mask = ST_GYRO_3_ODR_MASK,
+ .addr = 0x20,
+ .mask = 0xc0,
.odr_avl = {
- { 95, ST_GYRO_3_ODR_AVL_95HZ_VAL, },
- { 190, ST_GYRO_3_ODR_AVL_190HZ_VAL, },
- { 380, ST_GYRO_3_ODR_AVL_380HZ_VAL, },
- { 760, ST_GYRO_3_ODR_AVL_760HZ_VAL, },
+ { .hz = 100, .value = 0x00, },
+ { .hz = 200, .value = 0x01, },
+ { .hz = 400, .value = 0x02, },
+ { .hz = 800, .value = 0x03, },
},
},
.pw = {
- .addr = ST_GYRO_3_PW_ADDR,
- .mask = ST_GYRO_3_PW_MASK,
+ .addr = 0x20,
+ .mask = 0x08,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
@@ -293,33 +221,33 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
- .addr = ST_GYRO_3_FS_ADDR,
- .mask = ST_GYRO_3_FS_MASK,
+ .addr = 0x23,
+ .mask = 0x30,
.fs_avl = {
[0] = {
- .num = ST_GYRO_FS_AVL_250DPS,
- .value = ST_GYRO_3_FS_AVL_250_VAL,
- .gain = ST_GYRO_3_FS_AVL_250_GAIN,
+ .num = ST_GYRO_FS_AVL_245DPS,
+ .value = 0x00,
+ .gain = IIO_DEGREE_TO_RAD(8750),
},
[1] = {
.num = ST_GYRO_FS_AVL_500DPS,
- .value = ST_GYRO_3_FS_AVL_500_VAL,
- .gain = ST_GYRO_3_FS_AVL_500_GAIN,
+ .value = 0x01,
+ .gain = IIO_DEGREE_TO_RAD(17500),
},
[2] = {
.num = ST_GYRO_FS_AVL_2000DPS,
- .value = ST_GYRO_3_FS_AVL_2000_VAL,
- .gain = ST_GYRO_3_FS_AVL_2000_GAIN,
+ .value = 0x02,
+ .gain = IIO_DEGREE_TO_RAD(70000),
},
},
},
.bdu = {
- .addr = ST_GYRO_3_BDU_ADDR,
- .mask = ST_GYRO_3_BDU_MASK,
+ .addr = 0x23,
+ .mask = 0x80,
},
.drdy_irq = {
- .addr = ST_GYRO_3_DRDY_IRQ_ADDR,
- .mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK,
+ .addr = 0x22,
+ .mask_int2 = 0x08,
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
@@ -327,7 +255,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
*/
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
- .multi_read_bit = ST_GYRO_3_MULTIREAD_BIT,
+ .multi_read_bit = true,
.bootime = 2,
},
};
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index 40056b821036..3f628746cb93 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -40,6 +40,10 @@ static const struct of_device_id st_gyro_of_match[] = {
.compatible = "st,l3gd20-gyro",
.data = L3GD20_GYRO_DEV_NAME,
},
+ {
+ .compatible = "st,l3gd20h-gyro",
+ .data = L3GD20H_GYRO_DEV_NAME,
+ },
{
.compatible = "st,l3g4is-gyro",
.data = L3G4IS_GYRO_DEV_NAME,
@@ -95,6 +99,7 @@ static const struct i2c_device_id st_gyro_id_table[] = {
{ LSM330DL_GYRO_DEV_NAME },
{ LSM330DLC_GYRO_DEV_NAME },
{ L3GD20_GYRO_DEV_NAME },
+ { L3GD20H_GYRO_DEV_NAME },
{ L3G4IS_GYRO_DEV_NAME },
{ LSM330_GYRO_DEV_NAME },
{ LSM9DS0_GYRO_DEV_NAME },
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index fbf2faed501c..fa14d8f2170d 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -52,6 +52,7 @@ static const struct spi_device_id st_gyro_id_table[] = {
{ LSM330DL_GYRO_DEV_NAME },
{ LSM330DLC_GYRO_DEV_NAME },
{ L3GD20_GYRO_DEV_NAME },
+ { L3GD20H_GYRO_DEV_NAME },
{ L3G4IS_GYRO_DEV_NAME },
{ LSM330_GYRO_DEV_NAME },
{ LSM9DS0_GYRO_DEV_NAME },
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index fb69534a8b56..8f3086773db4 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -458,10 +458,10 @@ static int si470x_i2c_remove(struct i2c_client *client)

free_irq(client->irq, radio);
video_unregister_device(&radio->videodev);
- kfree(radio);

v4l2_ctrl_handler_free(&radio->hdl);
v4l2_device_unregister(&radio->v4l2_dev);
+ kfree(radio);
return 0;
}

diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c
index e5d411007ae4..519e01ba5750 100644
--- a/drivers/media/usb/dvb-usb/af9005.c
+++ b/drivers/media/usb/dvb-usb/af9005.c
@@ -567,7 +567,7 @@ static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply,
u8 *buf, int size)
{
u16 checksum;
- int act_len, i, ret;
+ int act_len = 0, i, ret;

memset(buf, 0, size);
buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c
index 475a3c0cdee7..20d33f0544ed 100644
--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -233,18 +233,22 @@ static struct rc_map_table rc_map_digitv_table[] = {

static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
- int i;
+ int ret, i;
u8 key[5];
u8 b[4] = { 0 };

*event = 0;
*state = REMOTE_NO_KEY_PRESSED;

- digitv_ctrl_msg(d,USB_READ_REMOTE,0,NULL,0,&key[1],4);
+ ret = digitv_ctrl_msg(d, USB_READ_REMOTE, 0, NULL, 0, &key[1], 4);
+ if (ret)
+ return ret;

/* Tell the device we've read the remote. Not sure how necessary
this is, but the Nebula SDK does it. */
- digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+ ret = digitv_ctrl_msg(d, USB_WRITE_REMOTE, 0, b, 4, NULL, 0);
+ if (ret)
+ return ret;

/* if something is inside the buffer, simulate key press */
if (key[1] != 0)
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-urb.c b/drivers/media/usb/dvb-usb/dvb-usb-urb.c
index 95f9097498cb..2fa8d71385ec 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-urb.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-urb.c
@@ -11,7 +11,7 @@
int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf,
u16 rlen, int delay_ms)
{
- int actlen,ret = -ENOMEM;
+ int actlen = 0, ret = -ENOMEM;

if (!d || wbuf == NULL || wlen == 0)
return -EINVAL;
diff --git a/drivers/media/usb/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c
index af2395a76d8b..2cba2e1acdc6 100644
--- a/drivers/media/usb/gspca/gspca.c
+++ b/drivers/media/usb/gspca/gspca.c
@@ -2043,7 +2043,7 @@ int gspca_dev_probe2(struct usb_interface *intf,
pr_err("couldn't kzalloc gspca struct\n");
return -ENOMEM;
}
- gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL);
+ gspca_dev->usb_buf = kzalloc(USB_BUF_SZ, GFP_KERNEL);
if (!gspca_dev->usb_buf) {
pr_err("out of memory\n");
ret = -ENOMEM;
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index 17aa33c5567d..d95dec595786 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -1524,8 +1524,10 @@ static int b44_magic_pattern(u8 *macaddr, u8 *ppattern, u8 *pmask, int offset)
int ethaddr_bytes = ETH_ALEN;

memset(ppattern + offset, 0xff, magicsync);
- for (j = 0; j < magicsync; j++)
- set_bit(len++, (unsigned long *) pmask);
+ for (j = 0; j < magicsync; j++) {
+ pmask[len >> 3] |= BIT(len & 7);
+ len++;
+ }

for (j = 0; j < B44_MAX_PATTERNS; j++) {
if ((B44_PATTERN_SIZE - len) >= ETH_ALEN)
@@ -1537,7 +1539,8 @@ static int b44_magic_pattern(u8 *macaddr, u8 *ppattern, u8 *pmask, int offset)
for (k = 0; k< ethaddr_bytes; k++) {
ppattern[offset + magicsync +
(j * ETH_ALEN) + k] = macaddr[k];
- set_bit(len++, (unsigned long *) pmask);
+ pmask[len >> 3] |= BIT(len & 7);
+ len++;
}
}
return len - 1;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
index 61c55621b958..c15052164717 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
@@ -66,8 +66,7 @@ static void *seq_tab_start(struct seq_file *seq, loff_t *pos)
static void *seq_tab_next(struct seq_file *seq, void *v, loff_t *pos)
{
v = seq_tab_get_idx(seq->private, *pos + 1);
- if (v)
- ++*pos;
+ ++(*pos);
return v;
}

diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
index 60a26037a1c6..e58aae110ed2 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
@@ -682,8 +682,7 @@ static void *l2t_seq_start(struct seq_file *seq, loff_t *pos)
static void *l2t_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
v = l2t_get_idx(seq, *pos);
- if (v)
- ++*pos;
+ ++(*pos);
return v;
}

diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c
index 21dd5579130e..c30994a09a7c 100644
--- a/drivers/net/ethernet/freescale/fman/fman_memac.c
+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
@@ -109,7 +109,7 @@ do { \
/* Interface Mode Register (IF_MODE) */

#define IF_MODE_MASK 0x00000003 /* 30-31 Mask on i/f mode bits */
-#define IF_MODE_XGMII 0x00000000 /* 30-31 XGMII (10G) interface */
+#define IF_MODE_10G 0x00000000 /* 30-31 10G interface */
#define IF_MODE_GMII 0x00000002 /* 30-31 GMII (1G) interface */
#define IF_MODE_RGMII 0x00000004
#define IF_MODE_RGMII_AUTO 0x00008000
@@ -438,7 +438,7 @@ static int init(struct memac_regs __iomem *regs, struct memac_cfg *cfg,
tmp = 0;
switch (phy_if) {
case PHY_INTERFACE_MODE_XGMII:
- tmp |= IF_MODE_XGMII;
+ tmp |= IF_MODE_10G;
break;
default:
tmp |= IF_MODE_GMII;
diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index e03b30c60dcf..c82c85ef5fb3 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -49,6 +49,7 @@ struct tgec_mdio_controller {
struct mdio_fsl_priv {
struct tgec_mdio_controller __iomem *mdio_base;
bool is_little_endian;
+ bool has_a011043;
};

static u32 xgmac_read32(void __iomem *regs,
@@ -226,7 +227,8 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
return ret;

/* Return all Fs if nothing was there */
- if (xgmac_read32(&regs->mdio_stat, endian) & MDIO_STAT_RD_ER) {
+ if ((xgmac_read32(&regs->mdio_stat, endian) & MDIO_STAT_RD_ER) &&
+ !priv->has_a011043) {
dev_err(&bus->dev,
"Error while reading PHY%d reg at %d.%hhu\n",
phy_id, dev_addr, regnum);
@@ -274,6 +276,9 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
priv->is_little_endian = of_property_read_bool(pdev->dev.of_node,
"little-endian");

+ priv->has_a011043 = of_property_read_bool(pdev->dev.of_node,
+ "fsl,erratum-a011043");
+
ret = of_mdiobus_register(bus, np);
if (ret) {
dev_err(&pdev->dev, "cannot register MDIO bus\n");
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 8ad20b7852ed..4c729faeb713 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4804,7 +4804,7 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
struct ixgbe_hw *hw = &adapter->hw;
struct hlist_node *node2;
struct ixgbe_fdir_filter *filter;
- u64 action;
+ u8 queue;

spin_lock(&adapter->fdir_perfect_lock);

@@ -4813,17 +4813,34 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)

hlist_for_each_entry_safe(filter, node2,
&adapter->fdir_filter_list, fdir_node) {
- action = filter->action;
- if (action != IXGBE_FDIR_DROP_QUEUE && action != 0)
- action =
- (action >> ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF) - 1;
+ if (filter->action == IXGBE_FDIR_DROP_QUEUE) {
+ queue = IXGBE_FDIR_DROP_QUEUE;
+ } else {
+ u32 ring = ethtool_get_flow_spec_ring(filter->action);
+ u8 vf = ethtool_get_flow_spec_ring_vf(filter->action);
+
+ if (!vf && (ring >= adapter->num_rx_queues)) {
+ e_err(drv, "FDIR restore failed without VF, ring: %u\n",
+ ring);
+ continue;
+ } else if (vf &&
+ ((vf > adapter->num_vfs) ||
+ ring >= adapter->num_rx_queues_per_pool)) {
+ e_err(drv, "FDIR restore failed with VF, vf: %hhu, ring: %u\n",
+ vf, ring);
+ continue;
+ }
+
+ /* Map the ring onto the absolute queue index */
+ if (!vf)
+ queue = adapter->rx_ring[ring]->reg_idx;
+ else
+ queue = ((vf - 1) *
+ adapter->num_rx_queues_per_pool) + ring;
+ }

ixgbe_fdir_write_perfect_filter_82599(hw,
- &filter->filter,
- filter->sw_idx,
- (action == IXGBE_FDIR_DROP_QUEUE) ?
- IXGBE_FDIR_DROP_QUEUE :
- adapter->rx_ring[action]->reg_idx);
+ &filter->filter, filter->sw_idx, queue);
}

spin_unlock(&adapter->fdir_perfect_lock);
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 75607267e656..7a763e85ff27 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1885,11 +1885,6 @@ static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
struct ixgbe_hw *hw = &adapter->hw;
int count = 0;

- if ((netdev_uc_count(netdev)) > 10) {
- pr_err("Too many unicast filters - No Space\n");
- return -ENOSPC;
- }
-
if (!netdev_uc_empty(netdev)) {
struct netdev_hw_addr *ha;

diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
index a051dddcbd76..254e6dbc4c6a 100644
--- a/drivers/net/ethernet/natsemi/sonic.c
+++ b/drivers/net/ethernet/natsemi/sonic.c
@@ -50,6 +50,8 @@ static int sonic_open(struct net_device *dev)
if (sonic_debug > 2)
printk("sonic_open: initializing sonic driver.\n");

+ spin_lock_init(&lp->lock);
+
for (i = 0; i < SONIC_NUM_RRS; i++) {
struct sk_buff *skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2);
if (skb == NULL) {
@@ -101,6 +103,24 @@ static int sonic_open(struct net_device *dev)
return 0;
}

+/* Wait for the SONIC to become idle. */
+static void sonic_quiesce(struct net_device *dev, u16 mask)
+{
+ struct sonic_local * __maybe_unused lp = netdev_priv(dev);
+ int i;
+ u16 bits;
+
+ for (i = 0; i < 1000; ++i) {
+ bits = SONIC_READ(SONIC_CMD) & mask;
+ if (!bits)
+ return;
+ if (irqs_disabled() || in_interrupt())
+ udelay(20);
+ else
+ usleep_range(100, 200);
+ }
+ WARN_ONCE(1, "command deadline expired! 0x%04x\n", bits);
+}

/*
* Close the SONIC device
@@ -118,6 +138,9 @@ static int sonic_close(struct net_device *dev)
/*
* stop the SONIC, disable interrupts
*/
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+ sonic_quiesce(dev, SONIC_CR_ALL);
+
SONIC_WRITE(SONIC_IMR, 0);
SONIC_WRITE(SONIC_ISR, 0x7fff);
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@@ -157,6 +180,9 @@ static void sonic_tx_timeout(struct net_device *dev)
* put the Sonic into software-reset mode and
* disable all interrupts before releasing DMA buffers
*/
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+ sonic_quiesce(dev, SONIC_CR_ALL);
+
SONIC_WRITE(SONIC_IMR, 0);
SONIC_WRITE(SONIC_ISR, 0x7fff);
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@@ -194,8 +220,6 @@ static void sonic_tx_timeout(struct net_device *dev)
* wake the tx queue
* Concurrently with all of this, the SONIC is potentially writing to
* the status flags of the TDs.
- * Until some mutual exclusion is added, this code will not work with SMP. However,
- * MIPS Jazz machines and m68k Macs were all uni-processor machines.
*/

static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
@@ -203,7 +227,8 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
struct sonic_local *lp = netdev_priv(dev);
dma_addr_t laddr;
int length;
- int entry = lp->next_tx;
+ int entry;
+ unsigned long flags;

if (sonic_debug > 2)
printk("sonic_send_packet: skb=%p, dev=%p\n", skb, dev);
@@ -226,6 +251,10 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
return NETDEV_TX_OK;
}

+ spin_lock_irqsave(&lp->lock, flags);
+
+ entry = lp->next_tx;
+
sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0); /* clear status */
sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1); /* single fragment */
sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */
@@ -235,10 +264,6 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
sonic_tda_put(dev, entry, SONIC_TD_LINK,
sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL);

- /*
- * Must set tx_skb[entry] only after clearing status, and
- * before clearing EOL and before stopping queue
- */
wmb();
lp->tx_len[entry] = length;
lp->tx_laddr[entry] = laddr;
@@ -263,6 +288,8 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)

SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP);

+ spin_unlock_irqrestore(&lp->lock, flags);
+
return NETDEV_TX_OK;
}

@@ -275,9 +302,21 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
struct net_device *dev = dev_id;
struct sonic_local *lp = netdev_priv(dev);
int status;
+ unsigned long flags;
+
+ /* The lock has two purposes. Firstly, it synchronizes sonic_interrupt()
+ * with sonic_send_packet() so that the two functions can share state.
+ * Secondly, it makes sonic_interrupt() re-entrant, as that is required
+ * by macsonic which must use two IRQs with different priority levels.
+ */
+ spin_lock_irqsave(&lp->lock, flags);
+
+ status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT;
+ if (!status) {
+ spin_unlock_irqrestore(&lp->lock, flags);

- if (!(status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT))
return IRQ_NONE;
+ }

do {
if (status & SONIC_INT_PKTRX) {
@@ -292,11 +331,12 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
int td_status;
int freed_some = 0;

- /* At this point, cur_tx is the index of a TD that is one of:
- * unallocated/freed (status set & tx_skb[entry] clear)
- * allocated and sent (status set & tx_skb[entry] set )
- * allocated and not yet sent (status clear & tx_skb[entry] set )
- * still being allocated by sonic_send_packet (status clear & tx_skb[entry] clear)
+ /* The state of a Transmit Descriptor may be inferred
+ * from { tx_skb[entry], td_status } as follows.
+ * { clear, clear } => the TD has never been used
+ * { set, clear } => the TD was handed to SONIC
+ * { set, set } => the TD was handed back
+ * { clear, set } => the TD is available for re-use
*/

if (sonic_debug > 2)
@@ -398,10 +438,30 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
/* load CAM done */
if (status & SONIC_INT_LCD)
SONIC_WRITE(SONIC_ISR, SONIC_INT_LCD); /* clear the interrupt */
- } while((status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT));
+
+ status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT;
+ } while (status);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+
return IRQ_HANDLED;
}

+/* Return the array index corresponding to a given Receive Buffer pointer. */
+static int index_from_addr(struct sonic_local *lp, dma_addr_t addr,
+ unsigned int last)
+{
+ unsigned int i = last;
+
+ do {
+ i = (i + 1) & SONIC_RRS_MASK;
+ if (addr == lp->rx_laddr[i])
+ return i;
+ } while (i != last);
+
+ return -ENOENT;
+}
+
/*
* We have a good packet(s), pass it/them up the network stack.
*/
@@ -421,6 +481,16 @@ static void sonic_rx(struct net_device *dev)

status = sonic_rda_get(dev, entry, SONIC_RD_STATUS);
if (status & SONIC_RCR_PRX) {
+ u32 addr = (sonic_rda_get(dev, entry,
+ SONIC_RD_PKTPTR_H) << 16) |
+ sonic_rda_get(dev, entry, SONIC_RD_PKTPTR_L);
+ int i = index_from_addr(lp, addr, entry);
+
+ if (i < 0) {
+ WARN_ONCE(1, "failed to find buffer!\n");
+ break;
+ }
+
/* Malloc up new buffer. */
new_skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2);
if (new_skb == NULL) {
@@ -442,7 +512,7 @@ static void sonic_rx(struct net_device *dev)

/* now we have a new skb to replace it, pass the used one up the stack */
dma_unmap_single(lp->device, lp->rx_laddr[entry], SONIC_RBSIZE, DMA_FROM_DEVICE);
- used_skb = lp->rx_skb[entry];
+ used_skb = lp->rx_skb[i];
pkt_len = sonic_rda_get(dev, entry, SONIC_RD_PKTLEN);
skb_trim(used_skb, pkt_len);
used_skb->protocol = eth_type_trans(used_skb, dev);
@@ -451,13 +521,13 @@ static void sonic_rx(struct net_device *dev)
lp->stats.rx_bytes += pkt_len;

/* and insert the new skb */
- lp->rx_laddr[entry] = new_laddr;
- lp->rx_skb[entry] = new_skb;
+ lp->rx_laddr[i] = new_laddr;
+ lp->rx_skb[i] = new_skb;

bufadr_l = (unsigned long)new_laddr & 0xffff;
bufadr_h = (unsigned long)new_laddr >> 16;
- sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, bufadr_l);
- sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, bufadr_h);
+ sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l);
+ sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h);
} else {
/* This should only happen, if we enable accepting broken packets. */
lp->stats.rx_errors++;
@@ -592,6 +662,7 @@ static int sonic_init(struct net_device *dev)
*/
SONIC_WRITE(SONIC_CMD, 0);
SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+ sonic_quiesce(dev, SONIC_CR_ALL);

/*
* initialize the receive resource area
diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
index 07091dd27e5d..7dcf913d7395 100644
--- a/drivers/net/ethernet/natsemi/sonic.h
+++ b/drivers/net/ethernet/natsemi/sonic.h
@@ -109,6 +109,9 @@
#define SONIC_CR_TXP 0x0002
#define SONIC_CR_HTX 0x0001

+#define SONIC_CR_ALL (SONIC_CR_LCAM | SONIC_CR_RRRA | \
+ SONIC_CR_RXEN | SONIC_CR_TXP)
+
/*
* SONIC data configuration bits
*/
@@ -273,8 +276,9 @@
#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */
#define SONIC_NUM_TDS 16 /* number of transmit descriptors */

-#define SONIC_RDS_MASK (SONIC_NUM_RDS-1)
-#define SONIC_TDS_MASK (SONIC_NUM_TDS-1)
+#define SONIC_RRS_MASK (SONIC_NUM_RRS - 1)
+#define SONIC_RDS_MASK (SONIC_NUM_RDS - 1)
+#define SONIC_TDS_MASK (SONIC_NUM_TDS - 1)

#define SONIC_RBSIZE 1520 /* size of one resource buffer */

@@ -320,6 +324,7 @@ struct sonic_local {
unsigned int next_tx; /* next free TD */
struct device *device; /* generic device */
struct net_device_stats stats;
+ spinlock_t lock;
};

#define TX_TIMEOUT (3 * HZ)
@@ -341,30 +346,30 @@ static void sonic_tx_timeout(struct net_device *dev);
as far as we can tell. */
/* OpenBSD calls this "SWO". I'd like to think that sonic_buf_put()
is a much better name. */
-static inline void sonic_buf_put(void* base, int bitmode,
+static inline void sonic_buf_put(u16 *base, int bitmode,
int offset, __u16 val)
{
if (bitmode)
#ifdef __BIG_ENDIAN
- ((__u16 *) base + (offset*2))[1] = val;
+ __raw_writew(val, base + (offset * 2) + 1);
#else
- ((__u16 *) base + (offset*2))[0] = val;
+ __raw_writew(val, base + (offset * 2) + 0);
#endif
else
- ((__u16 *) base)[offset] = val;
+ __raw_writew(val, base + (offset * 1) + 0);
}

-static inline __u16 sonic_buf_get(void* base, int bitmode,
+static inline __u16 sonic_buf_get(u16 *base, int bitmode,
int offset)
{
if (bitmode)
#ifdef __BIG_ENDIAN
- return ((volatile __u16 *) base + (offset*2))[1];
+ return __raw_readw(base + (offset * 2) + 1);
#else
- return ((volatile __u16 *) base + (offset*2))[0];
+ return __raw_readw(base + (offset * 2) + 0);
#endif
else
- return ((volatile __u16 *) base)[offset];
+ return __raw_readw(base + (offset * 1) + 0);
}

/* Inlines that you should actually use for reading/writing DMA buffers */
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index a496390b8632..07f9067affc6 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -2043,6 +2043,7 @@ static void qlcnic_83xx_exec_template_cmd(struct qlcnic_adapter *p_dev,
break;
}
entry += p_hdr->size;
+ cond_resched();
}
p_dev->ahw->reset.seq_index = index;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
index 0844b7c75767..5174e0bd75d1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
@@ -703,6 +703,7 @@ static u32 qlcnic_read_memory_test_agent(struct qlcnic_adapter *adapter,
addr += 16;
reg_read -= 16;
ret += 16;
+ cond_resched();
}
out:
mutex_unlock(&adapter->ahw->mem_lock);
@@ -1383,6 +1384,7 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
buf_offset += entry->hdr.cap_size;
entry_offset += entry->hdr.offset;
buffer = fw_dump->data + buf_offset;
+ cond_resched();
}

fw_dump->clr = 1;
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3c037b76a0cc..ba7cfc089516 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -4441,6 +4441,11 @@ static int rtl8152_probe(struct usb_interface *intf,

intf->needs_remote_wakeup = 1;

+ if (!rtl_can_wakeup(tp))
+ __rtl_set_wol(tp, 0);
+ else
+ tp->saved_wolopts = __rtl_get_wol(tp);
+
tp->rtl_ops.init(tp);
queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
set_ethernet_addr(tp);
@@ -4454,10 +4459,6 @@ static int rtl8152_probe(struct usb_interface *intf,
goto out1;
}

- if (!rtl_can_wakeup(tp))
- __rtl_set_wol(tp, 0);
-
- tp->saved_wolopts = __rtl_get_wol(tp);
if (tp->saved_wolopts)
device_set_wakeup_enable(&udev->dev, true);
else
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 421ac5f85699..79fd89150947 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -711,7 +711,7 @@ static netdev_tx_t sdla_transmit(struct sk_buff *skb,

spin_lock_irqsave(&sdla_lock, flags);
SDLA_WINDOW(dev, addr);
- pbuf = (void *)(((int) dev->mem_start) + (addr & SDLA_ADDR_MASK));
+ pbuf = (void *)(dev->mem_start + (addr & SDLA_ADDR_MASK));
__sdla_write(dev, pbuf->buf_addr, skb->data, skb->len);
SDLA_WINDOW(dev, addr);
pbuf->opp_flag = 1;
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index f15589c70284..b5e12be73f2b 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1213,7 +1213,7 @@ static void ath9k_hif_usb_firmware_cb(const struct firmware *fw, void *context)
static int send_eject_command(struct usb_interface *interface)
{
struct usb_device *udev = interface_to_usbdev(interface);
- struct usb_host_interface *iface_desc = &interface->altsetting[0];
+ struct usb_host_interface *iface_desc = interface->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
unsigned char *cmd;
u8 bulk_out_ep;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index acf513fd9e6d..05df9d8f76e9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1330,7 +1330,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
goto fail;
}

- desc = &intf->altsetting[0].desc;
+ desc = &intf->cur_altsetting->desc;
if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
(desc->bInterfaceSubClass != 2) ||
(desc->bInterfaceProtocol != 0xff)) {
@@ -1343,7 +1343,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)

num_of_eps = desc->bNumEndpoints;
for (ep = 0; ep < num_of_eps; ep++) {
- endpoint = &intf->altsetting[0].endpoint[ep].desc;
+ endpoint = &intf->cur_altsetting->endpoint[ep].desc;
endpoint_num = usb_endpoint_num(endpoint);
if (!usb_endpoint_xfer_bulk(endpoint))
continue;
diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c
index 04939e576ee0..a8d470010f5e 100644
--- a/drivers/net/wireless/cisco/airo.c
+++ b/drivers/net/wireless/cisco/airo.c
@@ -7796,16 +7796,8 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) {
case AIROGVLIST: ridcode = RID_APLIST; break;
case AIROGDRVNAM: ridcode = RID_DRVNAME; break;
case AIROGEHTENC: ridcode = RID_ETHERENCAP; break;
- case AIROGWEPKTMP: ridcode = RID_WEP_TEMP;
- /* Only super-user can read WEP keys */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- break;
- case AIROGWEPKNV: ridcode = RID_WEP_PERM;
- /* Only super-user can read WEP keys */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- break;
+ case AIROGWEPKTMP: ridcode = RID_WEP_TEMP; break;
+ case AIROGWEPKNV: ridcode = RID_WEP_PERM; break;
case AIROGSTAT: ridcode = RID_STATUS; break;
case AIROGSTATSD32: ridcode = RID_STATSDELTA; break;
case AIROGSTATSC32: ridcode = RID_STATS; break;
@@ -7819,7 +7811,13 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) {
return -EINVAL;
}

- if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL)
+ if (ridcode == RID_WEP_TEMP || ridcode == RID_WEP_PERM) {
+ /* Only super-user can read WEP keys */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ }
+
+ if ((iobuf = kzalloc(RIDSIZE, GFP_KERNEL)) == NULL)
return -ENOMEM;

PC4500_readrid(ai,ridcode,iobuf,RIDSIZE, 1);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
index bca6935a94db..8244d8262951 100644
--- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
@@ -1601,9 +1601,9 @@ static int ezusb_probe(struct usb_interface *interface,
/* set up the endpoint information */
/* check out the endpoints */

- iface_desc = &interface->altsetting[0].desc;
+ iface_desc = &interface->cur_altsetting->desc;
for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
- ep = &interface->altsetting[0].endpoint[i].desc;
+ ep = &interface->cur_altsetting->endpoint[i].desc;

if (usb_endpoint_is_bulk_in(ep)) {
/* we found a bulk in endpoint */
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index e588a0365257..18d5984b78da 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5890,7 +5890,7 @@ static int rtl8xxxu_parse_usb(struct rtl8xxxu_priv *priv,
u8 dir, xtype, num;
int ret = 0;

- host_interface = &interface->altsetting[0];
+ host_interface = interface->cur_altsetting;
interface_desc = &host_interface->desc;
endpoints = interface_desc->bNumEndpoints;

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index ef5d394f185b..974387ad1e8c 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -103,7 +103,7 @@ static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
__le16 buffer_size;
int ii, bep_found = 0;

- iface_desc = &(interface->altsetting[0]);
+ iface_desc = interface->cur_altsetting;

for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
endpoint = &(iface_desc->endpoint[ii].desc);
diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c
index 01ca1d57b3d9..213e5022ab93 100644
--- a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c
@@ -1272,7 +1272,7 @@ static void print_id(struct usb_device *udev)
static int eject_installer(struct usb_interface *intf)
{
struct usb_device *udev = interface_to_usbdev(intf);
- struct usb_host_interface *iface_desc = &intf->altsetting[0];
+ struct usb_host_interface *iface_desc = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
unsigned char *cmd;
u8 bulk_out_ep;
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index c056b8111ad2..7bf6102b4c3d 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -445,6 +445,9 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_IO_BLOCKED)))
return SCSI_MLQUEUE_HOST_BUSY;

+ if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_FWRESET)))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
rport = starget_to_rport(scsi_target(sc->device));
ret = fc_remote_port_chkready(rport);
if (ret) {
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index 5bb376009d98..fc33bfdc957c 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -377,6 +377,8 @@ static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
ret = rproc_boot(m3_ipc->rproc);
if (ret)
dev_err(dev, "rproc_boot failed\n");
+ else
+ m3_ipc_state = m3_ipc;

do_exit(0);
}
@@ -463,8 +465,6 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
goto err_put_rproc;
}

- m3_ipc_state = m3_ipc;
-
return 0;

err_put_rproc:
diff --git a/drivers/staging/most/aim-network/networking.c b/drivers/staging/most/aim-network/networking.c
index 4659a6450c04..6b18afb62145 100644
--- a/drivers/staging/most/aim-network/networking.c
+++ b/drivers/staging/most/aim-network/networking.c
@@ -87,6 +87,11 @@ static int skb_to_mamac(const struct sk_buff *skb, struct mbo *mbo)
unsigned int payload_len = skb->len - ETH_HLEN;
unsigned int mdp_len = payload_len + MDP_HDR_LEN;

+ if (mdp_len < skb->len) {
+ pr_err("drop: too large packet! (%u)\n", skb->len);
+ return -EINVAL;
+ }
+
if (mbo->buffer_length < mdp_len) {
pr_err("drop: too small buffer! (%d for %d)\n",
mbo->buffer_length, mdp_len);
@@ -134,6 +139,11 @@ static int skb_to_mep(const struct sk_buff *skb, struct mbo *mbo)
u8 *buff = mbo->virt_address;
unsigned int mep_len = skb->len + MEP_HDR_LEN;

+ if (mep_len < skb->len) {
+ pr_err("drop: too large packet! (%u)\n", skb->len);
+ return -EINVAL;
+ }
+
if (mbo->buffer_length < mep_len) {
pr_err("drop: too small buffer! (%d for %d)\n",
mbo->buffer_length, mep_len);
diff --git a/drivers/staging/vt6656/device.h b/drivers/staging/vt6656/device.h
index 5422ec1222ce..0578bf82f557 100644
--- a/drivers/staging/vt6656/device.h
+++ b/drivers/staging/vt6656/device.h
@@ -62,6 +62,8 @@
#define RATE_AUTO 12

#define MAX_RATE 12
+#define VNT_B_RATES (BIT(RATE_1M) | BIT(RATE_2M) |\
+ BIT(RATE_5M) | BIT(RATE_11M))

/*
* device specific
diff --git a/drivers/staging/vt6656/int.c b/drivers/staging/vt6656/int.c
index 73538fb4e4e2..b554e881e67f 100644
--- a/drivers/staging/vt6656/int.c
+++ b/drivers/staging/vt6656/int.c
@@ -107,9 +107,11 @@ static int vnt_int_report_rate(struct vnt_private *priv, u8 pkt_no, u8 tsr)

info->status.rates[0].count = tx_retry;

- if (!(tsr & (TSR_TMO | TSR_RETRYTMO))) {
+ if (!(tsr & TSR_TMO)) {
info->status.rates[0].idx = idx;
- info->flags |= IEEE80211_TX_STAT_ACK;
+
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+ info->flags |= IEEE80211_TX_STAT_ACK;
}

ieee80211_tx_status_irqsafe(priv->hw, context->skb);
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index 78b09640bcf0..b93773af2031 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -995,6 +995,7 @@ vt6656_probe(struct usb_interface *intf, const struct usb_device_id *id)
ieee80211_hw_set(priv->hw, RX_INCLUDES_FCS);
ieee80211_hw_set(priv->hw, REPORTS_TX_ACK_STATUS);
ieee80211_hw_set(priv->hw, SUPPORTS_PS);
+ ieee80211_hw_set(priv->hw, PS_NULLFUNC_STACK);

priv->hw->max_signal = 100;

diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index aa59e7f14ab3..5ccb9eb7ff1c 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -277,11 +277,9 @@ static u16 vnt_rxtx_datahead_g(struct vnt_usb_send_context *tx_context,
PK_TYPE_11B, &buf->b);

/* Get Duration and TimeStamp */
- if (ieee80211_is_pspoll(hdr->frame_control)) {
- __le16 dur = cpu_to_le16(priv->current_aid | BIT(14) | BIT(15));
-
- buf->duration_a = dur;
- buf->duration_b = dur;
+ if (ieee80211_is_nullfunc(hdr->frame_control)) {
+ buf->duration_a = hdr->duration_id;
+ buf->duration_b = hdr->duration_id;
} else {
buf->duration_a = vnt_get_duration_le(priv,
tx_context->pkt_type, need_ack);
@@ -370,10 +368,8 @@ static u16 vnt_rxtx_datahead_ab(struct vnt_usb_send_context *tx_context,
tx_context->pkt_type, &buf->ab);

/* Get Duration and TimeStampOff */
- if (ieee80211_is_pspoll(hdr->frame_control)) {
- __le16 dur = cpu_to_le16(priv->current_aid | BIT(14) | BIT(15));
-
- buf->duration = dur;
+ if (ieee80211_is_nullfunc(hdr->frame_control)) {
+ buf->duration = hdr->duration_id;
} else {
buf->duration = vnt_get_duration_le(priv, tx_context->pkt_type,
need_ack);
@@ -816,10 +812,14 @@ int vnt_tx_packet(struct vnt_private *priv, struct sk_buff *skb)
if (info->band == NL80211_BAND_5GHZ) {
pkt_type = PK_TYPE_11A;
} else {
- if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
- pkt_type = PK_TYPE_11GB;
- else
- pkt_type = PK_TYPE_11GA;
+ if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ if (priv->basic_rates & VNT_B_RATES)
+ pkt_type = PK_TYPE_11GB;
+ else
+ pkt_type = PK_TYPE_11GA;
+ } else {
+ pkt_type = PK_TYPE_11A;
+ }
}
} else {
pkt_type = PK_TYPE_11B;
diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c
index f815f9d5045f..08e2bbd9772f 100644
--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -938,7 +938,7 @@ int prism2mgmt_flashdl_state(struct wlandevice *wlandev, void *msgp)
}
}

- return 0;
+ return result;
}

/*----------------------------------------------------------------
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index e10f1244409b..2fa92ec1d1cc 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -119,7 +119,7 @@ static int bcm2835aux_serial_remove(struct platform_device *pdev)
{
struct bcm2835aux_data *data = platform_get_drvdata(pdev);

- serial8250_unregister_port(data->uart.port.line);
+ serial8250_unregister_port(data->line);
clk_disable_unprepare(data->clk);

return 0;
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 30bc5996a2f2..a89072f3bd3f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -936,6 +936,9 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
/* do nothing */
break;
}
+
+ /* de-assert DRVVBUS for HOST and OTG mode */
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
}

#define DWC3_ALIGN_MASK (16 - 1)
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 73956d48a0c5..1347c77facd0 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -49,9 +49,10 @@ static int buffer_size;
static int xbof = -1;

static int ir_startup (struct usb_serial *serial);
-static int ir_open(struct tty_struct *tty, struct usb_serial_port *port);
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
- void *dest, size_t size);
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+static int ir_write_room(struct tty_struct *tty);
+static void ir_write_bulk_callback(struct urb *urb);
static void ir_process_read_urb(struct urb *urb);
static void ir_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios);
@@ -81,8 +82,9 @@ static struct usb_serial_driver ir_device = {
.num_ports = 1,
.set_termios = ir_set_termios,
.attach = ir_startup,
- .open = ir_open,
- .prepare_write_buffer = ir_prepare_write_buffer,
+ .write = ir_write,
+ .write_room = ir_write_room,
+ .write_bulk_callback = ir_write_bulk_callback,
.process_read_urb = ir_process_read_urb,
};

@@ -198,6 +200,9 @@ static int ir_startup(struct usb_serial *serial)
{
struct usb_irda_cs_descriptor *irda_desc;

+ if (serial->num_bulk_in < 1 || serial->num_bulk_out < 1)
+ return -ENODEV;
+
irda_desc = irda_usb_find_class_desc(serial, 0);
if (!irda_desc) {
dev_err(&serial->dev->dev,
@@ -252,35 +257,102 @@ static int ir_startup(struct usb_serial *serial)
return 0;
}

-static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
- int i;
+ struct urb *urb = NULL;
+ unsigned long flags;
+ int ret;

- for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
- port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET;
+ if (port->bulk_out_size == 0)
+ return -EINVAL;

- /* Start reading from the device */
- return usb_serial_generic_open(tty, port);
-}
+ if (count == 0)
+ return 0;

-static int ir_prepare_write_buffer(struct usb_serial_port *port,
- void *dest, size_t size)
-{
- unsigned char *buf = dest;
- int count;
+ count = min(count, port->bulk_out_size - 1);
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (__test_and_clear_bit(0, &port->write_urbs_free)) {
+ urb = port->write_urbs[0];
+ port->tx_bytes += count;
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ if (!urb)
+ return 0;

/*
* The first byte of the packet we send to the device contains an
- * inbound header which indicates an additional number of BOFs and
+ * outbound header which indicates an additional number of BOFs and
* a baud rate change.
*
* See section 5.4.2.2 of the USB IrDA spec.
*/
- *buf = ir_xbof | ir_baud;
+ *(u8 *)urb->transfer_buffer = ir_xbof | ir_baud;
+
+ memcpy(urb->transfer_buffer + 1, buf, count);
+
+ urb->transfer_buffer_length = count + 1;
+ urb->transfer_flags = URB_ZERO_PACKET;
+
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret) {
+ dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
+
+ spin_lock_irqsave(&port->lock, flags);
+ __set_bit(0, &port->write_urbs_free);
+ port->tx_bytes -= count;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return ret;
+ }
+
+ return count;
+}
+
+static void ir_write_bulk_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ int status = urb->status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ __set_bit(0, &port->write_urbs_free);
+ port->tx_bytes -= urb->transfer_buffer_length - 1;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ switch (status) {
+ case 0:
+ break;
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&port->dev, "write urb stopped: %d\n", status);
+ return;
+ case -EPIPE:
+ dev_err(&port->dev, "write urb stopped: %d\n", status);
+ return;
+ default:
+ dev_err(&port->dev, "nonzero write-urb status: %d\n", status);
+ break;
+ }
+
+ usb_serial_port_softint(port);
+}
+
+static int ir_write_room(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ int count = 0;
+
+ if (port->bulk_out_size == 0)
+ return 0;
+
+ if (test_bit(0, &port->write_urbs_free))
+ count = port->bulk_out_size - 1;

- count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1,
- &port->lock);
- return count + 1;
+ return count;
}

static void ir_process_read_urb(struct urb *urb)
@@ -333,34 +405,34 @@ static void ir_set_termios(struct tty_struct *tty,

switch (baud) {
case 2400:
- ir_baud = USB_IRDA_BR_2400;
+ ir_baud = USB_IRDA_LS_2400;
break;
case 9600:
- ir_baud = USB_IRDA_BR_9600;
+ ir_baud = USB_IRDA_LS_9600;
break;
case 19200:
- ir_baud = USB_IRDA_BR_19200;
+ ir_baud = USB_IRDA_LS_19200;
break;
case 38400:
- ir_baud = USB_IRDA_BR_38400;
+ ir_baud = USB_IRDA_LS_38400;
break;
case 57600:
- ir_baud = USB_IRDA_BR_57600;
+ ir_baud = USB_IRDA_LS_57600;
break;
case 115200:
- ir_baud = USB_IRDA_BR_115200;
+ ir_baud = USB_IRDA_LS_115200;
break;
case 576000:
- ir_baud = USB_IRDA_BR_576000;
+ ir_baud = USB_IRDA_LS_576000;
break;
case 1152000:
- ir_baud = USB_IRDA_BR_1152000;
+ ir_baud = USB_IRDA_LS_1152000;
break;
case 4000000:
- ir_baud = USB_IRDA_BR_4000000;
+ ir_baud = USB_IRDA_LS_4000000;
break;
default:
- ir_baud = USB_IRDA_BR_9600;
+ ir_baud = USB_IRDA_LS_9600;
baud = 9600;
}

diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index f15aa47c54a9..0eb8c67ee138 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -163,12 +163,15 @@ UNUSUAL_DEV(0x2537, 0x1068, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_UAS),

-/* Reported-by: Takeo Nakayama <javhera@xxxxxxx> */
+/*
+ * Initially Reported-by: Takeo Nakayama <javhera@xxxxxxx>
+ * UAS Ignore Reported by Steven Ellis <sellis@xxxxxxxxxx>
+ */
UNUSUAL_DEV(0x357d, 0x7788, 0x0000, 0x9999,
"JMicron",
"JMS566",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- US_FL_NO_REPORT_OPCODES),
+ US_FL_NO_REPORT_OPCODES | US_FL_IGNORE_UAS),

/* Reported-by: Hans de Goede <hdegoede@xxxxxxxxxx> */
UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999,
diff --git a/drivers/watchdog/rn5t618_wdt.c b/drivers/watchdog/rn5t618_wdt.c
index 0805ee2acd7a..7aa8bf2d0f91 100644
--- a/drivers/watchdog/rn5t618_wdt.c
+++ b/drivers/watchdog/rn5t618_wdt.c
@@ -193,6 +193,7 @@ static struct platform_driver rn5t618_wdt_driver = {

module_platform_driver(rn5t618_wdt_driver);

+MODULE_ALIAS("platform:rn5t618-wdt");
MODULE_AUTHOR("Beniamino Galvani <b.galvani@xxxxxxxxx>");
MODULE_DESCRIPTION("RN5T618 watchdog driver");
MODULE_LICENSE("GPL v2");
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index a7b69deb6d70..0c71cdd3f98b 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -2164,7 +2164,15 @@ static int btrfs_statfs(struct dentry *dentry, struct kstatfs *buf)
*/
thresh = 4 * 1024 * 1024;

- if (!mixed && total_free_meta - thresh < block_rsv->size)
+ /*
+ * We only want to claim there's no available space if we can no longer
+ * allocate chunks for our metadata profile and our global reserve will
+ * not fit in the free metadata space. If we aren't ->full then we
+ * still can allocate chunks and thus are fine using the currently
+ * calculated f_bavail.
+ */
+ if (!mixed && block_rsv->space_info->full &&
+ total_free_meta - thresh < block_rsv->size)
buf->f_bavail = 0;

buf->f_type = BTRFS_SUPER_MAGIC;
diff --git a/fs/namei.c b/fs/namei.c
index 7150c4d0bd7b..757a50ecf0f4 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -3260,8 +3260,8 @@ static int do_last(struct nameidata *nd,
int *opened)
{
struct dentry *dir = nd->path.dentry;
- kuid_t dir_uid = dir->d_inode->i_uid;
- umode_t dir_mode = dir->d_inode->i_mode;
+ kuid_t dir_uid = nd->inode->i_uid;
+ umode_t dir_mode = nd->inode->i_mode;
int open_flag = op->open_flag;
bool will_truncate = (open_flag & O_TRUNC) != 0;
bool got_write = false;
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index cd2d555b3a6d..bfed2a700015 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -599,6 +599,7 @@ static void reiserfs_put_super(struct super_block *s)
reiserfs_write_unlock(s);
mutex_destroy(&REISERFS_SB(s)->lock);
destroy_workqueue(REISERFS_SB(s)->commit_wq);
+ kfree(REISERFS_SB(s)->s_jdev);
kfree(s->s_fs_info);
s->s_fs_info = NULL;
}
@@ -2217,6 +2218,7 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
kfree(qf_names[j]);
}
#endif
+ kfree(sbi->s_jdev);
kfree(sbi);

s->s_fs_info = NULL;
diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h
index e345ceaf72d6..9dc46010a067 100644
--- a/include/linux/usb/irda.h
+++ b/include/linux/usb/irda.h
@@ -118,11 +118,22 @@ struct usb_irda_cs_descriptor {
* 6 - 115200 bps
* 7 - 576000 bps
* 8 - 1.152 Mbps
- * 9 - 5 mbps
+ * 9 - 4 Mbps
* 10..15 - Reserved
*/
#define USB_IRDA_STATUS_LINK_SPEED 0x0f

+#define USB_IRDA_LS_NO_CHANGE 0
+#define USB_IRDA_LS_2400 1
+#define USB_IRDA_LS_9600 2
+#define USB_IRDA_LS_19200 3
+#define USB_IRDA_LS_38400 4
+#define USB_IRDA_LS_57600 5
+#define USB_IRDA_LS_115200 6
+#define USB_IRDA_LS_576000 7
+#define USB_IRDA_LS_1152000 8
+#define USB_IRDA_LS_4000000 9
+
/* The following is a 4-bit value used only for
* outbound header:
*
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 5cb5147235df..da7a932922cb 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2744,6 +2744,9 @@ int mpol_parse_str(char *str, struct mempolicy **mpol)
char *flags = strchr(str, '=');
int err = 1;

+ if (flags)
+ *flags++ = '\0'; /* terminate mode string */
+
if (nodelist) {
/* NUL-terminate mode or flags string */
*nodelist++ = '\0';
@@ -2754,9 +2757,6 @@ int mpol_parse_str(char *str, struct mempolicy **mpol)
} else
nodes_clear(nodes);

- if (flags)
- *flags++ = '\0'; /* terminate mode string */
-
for (mode = 0; mode < MPOL_MAX; mode++) {
if (!strcmp(str, policy_modes[mode])) {
break;
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index ca1836941f3c..44b3146c6117 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -826,6 +826,8 @@ static int hci_sock_release(struct socket *sock)
if (!sk)
return 0;

+ lock_sock(sk);
+
switch (hci_pi(sk)->channel) {
case HCI_CHANNEL_MONITOR:
atomic_dec(&monitor_promisc);
@@ -873,6 +875,7 @@ static int hci_sock_release(struct socket *sock)
skb_queue_purge(&sk->sk_receive_queue);
skb_queue_purge(&sk->sk_write_queue);

+ release_sock(sk);
sock_put(sk);
return 0;
}
diff --git a/net/core/utils.c b/net/core/utils.c
index cf5622b9ccc4..3317f90b32eb 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -316,6 +316,23 @@ void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
}
EXPORT_SYMBOL(inet_proto_csum_replace4);

+/**
+ * inet_proto_csum_replace16 - update layer 4 header checksum field
+ * @sum: Layer 4 header checksum field
+ * @skb: sk_buff for the packet
+ * @from: old IPv6 address
+ * @to: new IPv6 address
+ * @pseudohdr: True if layer 4 header checksum includes pseudoheader
+ *
+ * Update layer 4 header as per the update in IPv6 src/dst address.
+ *
+ * There is no need to update skb->csum in this function, because update in two
+ * fields a.) IPv6 src/dst address and b.) L4 header checksum cancels each other
+ * for skb->csum calculation. Whereas inet_proto_csum_replace4 function needs to
+ * update skb->csum, because update in 3 fields a.) IPv4 src/dst address,
+ * b.) IPv4 Header checksum and c.) L4 header checksum results in same diff as
+ * L4 Header checksum for skb->csum calculation.
+ */
void inet_proto_csum_replace16(__sum16 *sum, struct sk_buff *skb,
const __be32 *from, const __be32 *to,
bool pseudohdr)
@@ -327,9 +344,6 @@ void inet_proto_csum_replace16(__sum16 *sum, struct sk_buff *skb,
if (skb->ip_summed != CHECKSUM_PARTIAL) {
*sum = csum_fold(csum_partial(diff, sizeof(diff),
~csum_unfold(*sum)));
- if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
- skb->csum = ~csum_partial(diff, sizeof(diff),
- ~skb->csum);
} else if (pseudohdr)
*sum = ~csum_fold(csum_partial(diff, sizeof(diff),
csum_unfold(*sum)));
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index 4e39c935e057..ec417156f388 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -208,8 +208,17 @@ static netdev_tx_t vti_xmit(struct sk_buff *skb, struct net_device *dev,
int mtu;

if (!dst) {
- dev->stats.tx_carrier_errors++;
- goto tx_error_icmp;
+ struct rtable *rt;
+
+ fl->u.ip4.flowi4_oif = dev->ifindex;
+ fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
+ rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
+ if (IS_ERR(rt)) {
+ dev->stats.tx_carrier_errors++;
+ goto tx_error_icmp;
+ }
+ dst = &rt->dst;
+ skb_dst_set(skb, dst);
}

dst_hold(dst);
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index c2b2ee71fc6c..a266fac08426 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -453,8 +453,17 @@ vti6_xmit(struct sk_buff *skb, struct net_device *dev, struct flowi *fl)
int err = -1;
int mtu;

- if (!dst)
- goto tx_err_link_failure;
+ if (!dst) {
+ fl->u.ip6.flowi6_oif = dev->ifindex;
+ fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
+ dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
+ if (dst->error) {
+ dst_release(dst);
+ dst = NULL;
+ goto tx_err_link_failure;
+ }
+ skb_dst_set(skb, dst);
+ }

dst_hold(dst);
dst = xfrm_lookup(t->net, dst, fl, NULL, 0);
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index b0acb2961e80..5f4c228b82e5 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -326,6 +326,9 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local,
u32 tx_time, estimated_retx;
u64 result;

+ if (sta->mesh->plink_state != NL80211_PLINK_ESTAB)
+ return MAX_METRIC;
+
/* Try to get rate based on HW/SW RC algorithm.
* Rate is returned in units of Kbps, correct this
* to comply with airtime calculation units
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index b3622823bad2..ebd66e8f46b3 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -266,9 +266,21 @@ int ieee80211_tkip_decrypt_data(struct crypto_cipher *tfm,
if ((keyid >> 6) != key->conf.keyidx)
return TKIP_DECRYPT_INVALID_KEYIDX;

- if (rx_ctx->ctx.state != TKIP_STATE_NOT_INIT &&
- (iv32 < rx_ctx->iv32 ||
- (iv32 == rx_ctx->iv32 && iv16 <= rx_ctx->iv16)))
+ /* Reject replays if the received TSC is smaller than or equal to the
+ * last received value in a valid message, but with an exception for
+ * the case where a new key has been set and no valid frame using that
+ * key has yet received and the local RSC was initialized to 0. This
+ * exception allows the very first frame sent by the transmitter to be
+ * accepted even if that transmitter were to use TSC 0 (IEEE 802.11
+ * described TSC to be initialized to 1 whenever a new key is taken into
+ * use).
+ */
+ if (iv32 < rx_ctx->iv32 ||
+ (iv32 == rx_ctx->iv32 &&
+ (iv16 < rx_ctx->iv16 ||
+ (iv16 == rx_ctx->iv16 &&
+ (rx_ctx->iv32 || rx_ctx->iv16 ||
+ rx_ctx->ctx.state != TKIP_STATE_NOT_INIT)))))
return TKIP_DECRYPT_REPLAY;

if (only_iv) {
diff --git a/net/sched/ematch.c b/net/sched/ematch.c
index b0b04b3c0896..d4d6f9c91e8c 100644
--- a/net/sched/ematch.c
+++ b/net/sched/ematch.c
@@ -242,6 +242,9 @@ static int tcf_em_validate(struct tcf_proto *tp,
goto errout;

if (em->ops->change) {
+ err = -EINVAL;
+ if (em_hdr->flags & TCF_EM_SIMPLE)
+ goto errout;
err = em->ops->change(net, data, data_len, em);
if (err < 0)
goto errout;
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index dde741f298de..0e66768427ba 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1715,14 +1715,15 @@ static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator)

static void handle_channel_custom(struct wiphy *wiphy,
struct ieee80211_channel *chan,
- const struct ieee80211_regdomain *regd)
+ const struct ieee80211_regdomain *regd,
+ u32 min_bw)
{
u32 bw_flags = 0;
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
u32 bw;

- for (bw = MHZ_TO_KHZ(20); bw >= MHZ_TO_KHZ(5); bw = bw / 2) {
+ for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
reg_rule = freq_reg_info_regd(MHZ_TO_KHZ(chan->center_freq),
regd, bw);
if (!IS_ERR(reg_rule))
@@ -1778,8 +1779,14 @@ static void handle_band_custom(struct wiphy *wiphy,
if (!sband)
return;

+ /*
+ * We currently assume that you always want at least 20 MHz,
+ * otherwise channel 12 might get enabled if this rule is
+ * compatible to US, which permits 2402 - 2472 MHz.
+ */
for (i = 0; i < sband->n_channels; i++)
- handle_channel_custom(wiphy, &sband->channels[i], regd);
+ handle_channel_custom(wiphy, &sband->channels[i], regd,
+ MHZ_TO_KHZ(20));
}

/* Used by drivers prior to wiphy registration */
diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c
index 6250b1cfcde5..4bf0296a7c43 100644
--- a/net/wireless/wext-core.c
+++ b/net/wireless/wext-core.c
@@ -659,7 +659,8 @@ struct iw_statistics *get_wireless_stats(struct net_device *dev)
return NULL;
}

-static int iw_handler_get_iwstats(struct net_device * dev,
+/* noinline to avoid a bogus warning with -O3 */
+static noinline int iw_handler_get_iwstats(struct net_device * dev,
struct iw_request_info * info,
union iwreq_data * wrqu,
char * extra)
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 2376b09c35cf..23e17a58651b 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -588,7 +588,7 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
runtime->boundary *= 2;

/* clear the buffer for avoiding possible kernel info leaks */
- if (runtime->dma_area)
+ if (runtime->dma_area && !substream->ops->copy)
memset(runtime->dma_area, 0, runtime->dma_bytes);

snd_pcm_timer_resolution_change(substream);
diff --git a/tools/include/linux/string.h b/tools/include/linux/string.h
index f436d2420a18..115ecca5f8b9 100644
--- a/tools/include/linux/string.h
+++ b/tools/include/linux/string.h
@@ -13,7 +13,15 @@ int strtobool(const char *s, bool *res);
* However uClibc headers also define __GLIBC__ hence the hack below
*/
#if defined(__GLIBC__) && !defined(__UCLIBC__)
+// pragma diagnostic was introduced in gcc 4.6
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wredundant-decls"
+#endif
extern size_t strlcpy(char *dest, const char *src, size_t size);
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic pop
+#endif
#endif

char *str_error_r(int errnum, char *buf, size_t buflen);
diff --git a/tools/lib/string.c b/tools/lib/string.c
index bd239bc1d557..0e071c0bb09e 100644
--- a/tools/lib/string.c
+++ b/tools/lib/string.c
@@ -76,6 +76,10 @@ int strtobool(const char *s, bool *res)
* If libc has strlcpy() then that version will override this
* implementation:
*/
+#ifdef __clang__
+#pragma clang diagnostic push
+#pragma clang diagnostic ignored "-Wignored-attributes"
+#endif
size_t __weak strlcpy(char *dest, const char *src, size_t size)
{
size_t ret = strlen(src);
@@ -87,3 +91,6 @@ size_t __weak strlcpy(char *dest, const char *src, size_t size)
}
return ret;
}
+#ifdef __clang__
+#pragma clang diagnostic pop
+#endif

Next message: Qais Yousef: "Re: [PATCH v2] sched: rt: Make RT capacity aware"
Previous message: Greg KH: "Linux 4.9.213"
In reply to: Greg KH: "Linux 4.9.213"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]