[PATCH net] net: systemport: Avoid RBUF stuck in Wake-on-LAN mode

[Florian Fainelli]

After a number of suspend and resume cycles, it is possible for the RBUF
to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
cleared which instructed the RBUF to exit that mode.

Avoid creating that problematic condition by clearing the RX_EN and
TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.

Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index f07ac0e0af59..e0611cba87f9 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -2736,6 +2736,9 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
 
 	umac_reset(priv);
 
+	/* Disable the UniMAC RX/TX */
+	umac_enable_set(priv, CMD_RX_EN | CMD_TX_EN, 0);
+
 	/* We may have been suspended and never received a WOL event that
 	 * would turn off MPD detection, take care of that now
 	 */
-- 
2.17.1