Re: [PATCH] iommu/intel-iommu: set as DUMMY_DEVICE_DOMAIN_INFO if no IOMMU

From: Lu Baolu
Date: Thu Feb 06 2020 - 05:49:58 EST

Next message: Joe Perches: "[PATCH] rtw88: 8822[bc]: Make tables const, reduce data object size"
Previous message: Takashi Iwai: "Re: [PATCH] ALSA: hda: Clear RIRB status before reading WP"
In reply to: Christoph Hellwig: "Re: [PATCH] iommu/intel-iommu: set as DUMMY_DEVICE_DOMAIN_INFO if no IOMMU"
Next in thread: Jian-Hong Pan: "Re: [PATCH] iommu/intel-iommu: set as DUMMY_DEVICE_DOMAIN_INFO if no IOMMU"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On 2020/2/5 18:06, Jian-Hong Pan wrote:

Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx> æ 2020å2æ5æ éä äå9:28åéï

Hi,

On 2020/2/4 17:25, Jian-Hong Pan wrote:

Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx> æ 2020å2æ4æ éä äå2:11åéï

Hi,

On 2020/2/3 17:10, Jian-Hong Pan wrote:

If the device has no IOMMU, it still invokes iommu_need_mapping during
intel_alloc_coherent. However, iommu_need_mapping can only check the
device is DUMMY_DEVICE_DOMAIN_INFO or not. This patch marks the device
is a DUMMY_DEVICE_DOMAIN_INFO if the device has no IOMMU.

Signed-off-by: Jian-Hong Pan <jian-hong@xxxxxxxxxxxx>
---
drivers/iommu/intel-iommu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 35a4a3abedc6..878bc986a015 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -5612,8 +5612,10 @@ static int intel_iommu_add_device(struct device *dev)
int ret;

iommu = device_to_iommu(dev, &bus, &devfn);
- if (!iommu)
+ if (!iommu) {
+ dev->archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;

Is this a DMA capable device?

Do you mean is the device in DMA Remapping table?
Dump DMAR from ACPI table. The device is not in the table.
So, it does not support DMAR, Intel IOMMU.

Or, should device_to_iommu be invoked in iommu_need_mapping to check
IOMMU feature again?

Normally intel_iommu_add_device() should only be called for PCI devices
and APCI name space devices (reported in ACPI/DMAR table). In both
cases, device_to_iommu() should always return a corresponding iommu. I
just tried to understand why it failed for your case.

We found all of the DMAR featured devices's PCI Segment Number is *0000*.
But the devices locating under segment/domain *0001* hit the issue,
until the patch is applied.

Because of different segment numbers, none of iommu will be matched by
for_each_active_iommu(iommu, drhd) loop in function device_to_iommu()
and it will return NULL. So, intel_iommu_add_device() returns no
device.

I can share the DMAR:
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20200110 (64-bit version)
* Copyright (c) 2000 - 2020 Intel Corporation
*
* Disassembly of dmar.dat, Wed Jan 22 11:41:50 2020
*
* ACPI Data Table [DMAR]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/

[000h 0000 4] Signature : "DMAR" [DMA Remapping table]
[004h 0004 4] Table Length : 000000A8
[008h 0008 1] Revision : 01
[009h 0009 1] Checksum : 5E
[00Ah 0010 6] Oem ID : "INTEL "
[010h 0016 8] Oem Table ID : "EDK2 "
[018h 0024 4] Oem Revision : 00000002
[01Ch 0028 4] Asl Compiler ID : " "
[020h 0032 4] Asl Compiler Revision : 01000013

[024h 0036 1] Host Address Width : 26
[025h 0037 1] Flags : 05
[026h 0038 10] Reserved : 00 00 00 00 00 00 00 00 00 00

[030h 0048 2] Subtable Type : 0000 [Hardware Unit Definition]
[032h 0050 2] Length : 0018

[034h 0052 1] Flags : 00
[035h 0053 1] Reserved : 00
[036h 0054 2] PCI Segment Number : 0000
[038h 0056 8] Register Base Address : 00000000FED90000

[040h 0064 1] Device Scope Type : 01 [PCI Endpoint Device]
[041h 0065 1] Entry Length : 08
[042h 0066 2] Reserved : 0000
[044h 0068 1] Enumeration ID : 00
[045h 0069 1] PCI Bus Number : 00

[046h 0070 2] PCI Path : 02,00

[048h 0072 2] Subtable Type : 0000 [Hardware Unit Definition]
[04Ah 0074 2] Length : 0020

[04Ch 0076 1] Flags : 01
[04Dh 0077 1] Reserved : 00
[04Eh 0078 2] PCI Segment Number : 0000
[050h 0080 8] Register Base Address : 00000000FED91000

[058h 0088 1] Device Scope Type : 03 [IOAPIC Device]
[059h 0089 1] Entry Length : 08
[05Ah 0090 2] Reserved : 0000
[05Ch 0092 1] Enumeration ID : 02
[05Dh 0093 1] PCI Bus Number : 00

[05Eh 0094 2] PCI Path : 1E,07

[060h 0096 1] Device Scope Type : 04 [Message-capable HPET Device]
[061h 0097 1] Entry Length : 08
[062h 0098 2] Reserved : 0000
[064h 0100 1] Enumeration ID : 00
[065h 0101 1] PCI Bus Number : 00

[066h 0102 2] PCI Path : 1E,06

[068h 0104 2] Subtable Type : 0001 [Reserved Memory Region]
[06Ah 0106 2] Length : 0020

[06Ch 0108 2] Reserved : 0000
[06Eh 0110 2] PCI Segment Number : 0000
[070h 0112 8] Base Address : 000000006F58B000
[078h 0120 8] End Address (limit) : 000000006F7D4FFF

[080h 0128 1] Device Scope Type : 01 [PCI Endpoint Device]
[081h 0129 1] Entry Length : 08
[082h 0130 2] Reserved : 0000
[084h 0132 1] Enumeration ID : 00
[085h 0133 1] PCI Bus Number : 00

[086h 0134 2] PCI Path : 14,00

[088h 0136 2] Subtable Type : 0001 [Reserved Memory Region]
[08Ah 0138 2] Length : 0020

[08Ch 0140 2] Reserved : 0000
[08Eh 0142 2] PCI Segment Number : 0000
[090h 0144 8] Base Address : 0000000079800000
[098h 0152 8] End Address (limit) : 000000007DFFFFFF

[0A0h 0160 1] Device Scope Type : 01 [PCI Endpoint Device]
[0A1h 0161 1] Entry Length : 08
[0A2h 0162 2] Reserved : 0000
[0A4h 0164 1] Enumeration ID : 00
[0A5h 0165 1] PCI Bus Number : 00

[0A6h 0166 2] PCI Path : 02,00

Raw Table Data: Length 168 (0xA8)

0000: 44 4D 41 52 A8 00 00 00 01 5E 49 4E 54 45 4C 20 // DMAR.....^INTEL
0010: 45 44 4B 32 20 20 20 20 02 00 00 00 20 20 20 20 // EDK2 ....
0020: 13 00 00 01 26 05 00 00 00 00 00 00 00 00 00 00 // ....&...........
0030: 00 00 18 00 00 00 00 00 00 00 D9 FE 00 00 00 00 // ................
0040: 01 08 00 00 00 00 02 00 00 00 20 00 01 00 00 00 // .......... .....
0050: 00 10 D9 FE 00 00 00 00 03 08 00 00 02 00 1E 07 // ................
0060: 04 08 00 00 00 00 1E 06 01 00 20 00 00 00 00 00 // .......... .....
0070: 00 B0 58 6F 00 00 00 00 FF 4F 7D 6F 00 00 00 00 // ..Xo.....O}o....
0080: 01 08 00 00 00 00 14 00 01 00 20 00 00 00 00 00 // .......... .....
0090: 00 00 80 79 00 00 00 00 FF FF FF 7D 00 00 00 00 // ...y.......}....
00A0: 01 08 00 00 00 00 02 00 // ........

Here is the lspci:
0000:00:00.0 Host bridge: Intel Corporation Device 9b61 (rev 0c)
0000:00:02.0 VGA compatible controller: Intel Corporation Device 9b41 (rev 02)
0000:00:04.0 Signal processing controller: Intel Corporation Skylake
Processor Thermal Subsystem (rev 0c)
0000:00:08.0 System peripheral: Intel Corporation Skylake Gaussian Mixture Model
0000:00:12.0 Signal processing controller: Intel Corporation Device 02f9
0000:00:13.0 Serial controller: Intel Corporation Device 02fc
0000:00:14.0 USB controller: Intel Corporation Device 02ed
0000:00:14.2 RAM memory: Intel Corporation Device 02ef
0000:00:14.3 Network controller: Intel Corporation Device 02f0
0000:00:15.0 Serial bus controller [0c80]: Intel Corporation Device 02e8
0000:00:15.1 Serial bus controller [0c80]: Intel Corporation Device 02e9
0000:00:15.2 Serial bus controller [0c80]: Intel Corporation Device 02ea
0000:00:16.0 Communication controller: Intel Corporation Device 02e0
0000:00:17.0 RAID bus controller: Intel Corporation Device 02d7
0000:00:1c.0 PCI bridge: Intel Corporation Device 02b8 (rev f0)
0000:00:1e.0 Communication controller: Intel Corporation Device 02a8
0000:00:1e.2 Serial bus controller [0c80]: Intel Corporation Device 02aa
0000:00:1f.0 ISA bridge: Intel Corporation Device 0284
0000:00:1f.3 Audio device: Intel Corporation Device 02c8
0000:00:1f.4 SMBus: Intel Corporation Device 02a3
0000:00:1f.5 Serial bus controller [0c80]: Intel Corporation Device 02a4
0000:00:1f.6 Ethernet controller: Intel Corporation Device 0d4f
0000:01:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3
Bridge [Titan Ridge 4C 2018] (rev 06)
0000:02:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3
Bridge [Titan Ridge 4C 2018] (rev 06)
0000:02:01.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3
Bridge [Titan Ridge 4C 2018] (rev 06)
0000:02:02.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3
Bridge [Titan Ridge 4C 2018] (rev 06)
0000:02:04.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3
Bridge [Titan Ridge 4C 2018] (rev 06)
0000:03:00.0 System peripheral: Intel Corporation JHL7540 Thunderbolt
3 NHI [Titan Ridge 4C 2018] (rev 06)
0000:37:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3
USB Controller [Titan Ridge 4C 2018] (rev 06)
0001:00:00.0 SATA controller: Intel Corporation Device 02d7
0001:00:01.0 Non-Volatile memory controller: Intel Corporation Device 0000
0001:00:02.0 Non-Volatile memory controller: Intel Corporation Device 0000

So devices are sitting in PCI segment 1, while ACPI/DMAR only reports
IOMMU units for PCI segment 0. Do I understand it right?

Is it possible that hardware supports DMAR for both PCI segment 0 and 1,
but the firmware doesn't reports those for PCI segement 1?

Best regards,
Jian-Hong Pan

Best regards,
baolu

Next message: Joe Perches: "[PATCH] rtw88: 8822[bc]: Make tables const, reduce data object size"
Previous message: Takashi Iwai: "Re: [PATCH] ALSA: hda: Clear RIRB status before reading WP"
In reply to: Christoph Hellwig: "Re: [PATCH] iommu/intel-iommu: set as DUMMY_DEVICE_DOMAIN_INFO if no IOMMU"
Next in thread: Jian-Hong Pan: "Re: [PATCH] iommu/intel-iommu: set as DUMMY_DEVICE_DOMAIN_INFO if no IOMMU"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]