Re: [PATCH v3 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040

From: Jonathan Cameron
Date: Thu Feb 06 2020 - 06:27:00 EST

Next message: Andrew Murray: "Re: [PATCHv9 01/12] PCI: mobiveil: Re-abstract the private structure"
Previous message: Michael S. Tsirkin: "Re: [PATCH RFC] virtio_balloon: conservative balloon page shrinking"
In reply to: Guido GÃnther: "[PATCH v3 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, 3 Feb 2020 10:17:02 +0100
Guido GÃnther <agx@xxxxxxxxxxx> wrote:

> This is modelled after the vcnl4035 driver. For the vcnl40{0,1,2}0
> we don't do anything since they use on demand measurement.
>
> Signed-off-by: Guido GÃnther <agx@xxxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.

I won't push this out as a non rebasing branch for a week or so yet,
hence plenty of time for others to comment even though I have it queued
up!

Jonathan

> ---
> drivers/iio/light/vcnl4000.c | 129 +++++++++++++++++++++++++++++++----
> 1 file changed, 117 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
> index 8f198383626b..3b71c7d538af 100644
> --- a/drivers/iio/light/vcnl4000.c
> +++ b/drivers/iio/light/vcnl4000.c
> @@ -22,6 +22,7 @@
> #include <linux/i2c.h>
> #include <linux/err.h>
> #include <linux/delay.h>
> +#include <linux/pm_runtime.h>
>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> @@ -57,6 +58,8 @@
> #define VCNL4000_AL_OD BIT(4) /* start on-demand ALS measurement */
> #define VCNL4000_PS_OD BIT(3) /* start on-demand proximity measurement */
>
> +#define VCNL4000_SLEEP_DELAY_MS 2000 /* before we enter pm_runtime_suspend */
> +
> enum vcnl4000_device_ids {
> VCNL4000,
> VCNL4010,
> @@ -87,6 +90,7 @@ struct vcnl4000_chip_spec {
> int (*init)(struct vcnl4000_data *data);
> int (*measure_light)(struct vcnl4000_data *data, int *val);
> int (*measure_proximity)(struct vcnl4000_data *data, int *val);
> + int (*set_power_state)(struct vcnl4000_data *data, bool on);
> };
>
> static const struct i2c_device_id vcnl4000_id[] = {
> @@ -99,6 +103,12 @@ static const struct i2c_device_id vcnl4000_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, vcnl4000_id);
>
> +static int vcnl4000_set_power_state(struct vcnl4000_data *data, bool on)
> +{
> + /* no suspend op */
> + return 0;
> +}
> +
> static int vcnl4000_init(struct vcnl4000_data *data)
> {
> int ret, prod_id;
> @@ -127,9 +137,31 @@ static int vcnl4000_init(struct vcnl4000_data *data)
> data->al_scale = 250000;
> mutex_init(&data->vcnl4000_lock);
>
> - return 0;
> + return data->chip_spec->set_power_state(data, true);
> };
>
> +static int vcnl4200_set_power_state(struct vcnl4000_data *data, bool on)
> +{
> + u16 val = on ? 0 /* power on */ : 1 /* shut down */;
> + int ret;
> +
> + ret = i2c_smbus_write_word_data(data->client, VCNL4200_AL_CONF, val);
> + if (ret < 0)
> + return ret;
> +
> + return i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1, val);
> + if (ret < 0)
> + return ret;
> +
> + if (on) {
> + /* Wait at least one integration cycle before fetching data */
> + data->vcnl4200_al.last_measurement = ktime_get();
> + data->vcnl4200_ps.last_measurement = ktime_get();
> + }
> +
> + return 0;
> +}
> +
> static int vcnl4200_init(struct vcnl4000_data *data)
> {
> int ret, id;
> @@ -155,14 +187,6 @@ static int vcnl4200_init(struct vcnl4000_data *data)
>
> data->rev = (ret >> 8) & 0xf;
>
> - /* Set defaults and enable both channels */
> - ret = i2c_smbus_write_word_data(data->client, VCNL4200_AL_CONF, 0);
> - if (ret < 0)
> - return ret;
> - ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1, 0);
> - if (ret < 0)
> - return ret;
> -
> data->vcnl4200_al.reg = VCNL4200_AL_DATA;
> data->vcnl4200_ps.reg = VCNL4200_PS_DATA;
> switch (id) {
> @@ -180,11 +204,13 @@ static int vcnl4200_init(struct vcnl4000_data *data)
> data->al_scale = 120000;
> break;
> }
> - data->vcnl4200_al.last_measurement = ktime_set(0, 0);
> - data->vcnl4200_ps.last_measurement = ktime_set(0, 0);
> mutex_init(&data->vcnl4200_al.lock);
> mutex_init(&data->vcnl4200_ps.lock);
>
> + ret = data->chip_spec->set_power_state(data, true);
> + if (ret < 0)
> + return ret;
> +
> return 0;
> };
>
> @@ -291,24 +317,28 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
> .init = vcnl4000_init,
> .measure_light = vcnl4000_measure_light,
> .measure_proximity = vcnl4000_measure_proximity,
> + .set_power_state = vcnl4000_set_power_state,
> },
> [VCNL4010] = {
> .prod = "VCNL4010/4020",
> .init = vcnl4000_init,
> .measure_light = vcnl4000_measure_light,
> .measure_proximity = vcnl4000_measure_proximity,
> + .set_power_state = vcnl4000_set_power_state,
> },
> [VCNL4040] = {
> .prod = "VCNL4040",
> .init = vcnl4200_init,
> .measure_light = vcnl4200_measure_light,
> .measure_proximity = vcnl4200_measure_proximity,
> + .set_power_state = vcnl4200_set_power_state,
> },
> [VCNL4200] = {
> .prod = "VCNL4200",
> .init = vcnl4200_init,
> .measure_light = vcnl4200_measure_light,
> .measure_proximity = vcnl4200_measure_proximity,
> + .set_power_state = vcnl4200_set_power_state,
> },
> };
>
> @@ -323,6 +353,23 @@ static const struct iio_chan_spec vcnl4000_channels[] = {
> }
> };
>
> +static int vcnl4000_set_pm_runtime_state(struct vcnl4000_data *data, bool on)
> +{
> + struct device *dev = &data->client->dev;
> + int ret;
> +
> + if (on) {
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0)
> + pm_runtime_put_noidle(dev);
> + } else {
> + pm_runtime_mark_last_busy(dev);
> + ret = pm_runtime_put_autosuspend(dev);
> + }
> +
> + return ret;
> +}
> +
> static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int *val, int *val2, long mask)
> @@ -332,6 +379,10 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> + ret = vcnl4000_set_pm_runtime_state(data, true);
> + if (ret < 0)
> + return ret;
> +
> switch (chan->type) {
> case IIO_LIGHT:
> ret = data->chip_spec->measure_light(data, val);
> @@ -346,6 +397,7 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> default:
> ret = -EINVAL;
> }
> + vcnl4000_set_pm_runtime_state(data, false);
> return ret;
> case IIO_CHAN_INFO_SCALE:
> if (chan->type != IIO_LIGHT)
> @@ -394,7 +446,22 @@ static int vcnl4000_probe(struct i2c_client *client,
> indio_dev->name = VCNL4000_DRV_NAME;
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> - return devm_iio_device_register(&client->dev, indio_dev);
> + ret = pm_runtime_set_active(&client->dev);
> + if (ret < 0)
> + goto fail_poweroff;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0)
> + goto fail_poweroff;
> +
> + pm_runtime_enable(&client->dev);
> + pm_runtime_set_autosuspend_delay(&client->dev, VCNL4000_SLEEP_DELAY_MS);
> + pm_runtime_use_autosuspend(&client->dev);
> +
> + return 0;
> +fail_poweroff:
> + data->chip_spec->set_power_state(data, false);
> + return ret;
> }
>
> static const struct of_device_id vcnl_4000_of_match[] = {
> @@ -422,13 +489,51 @@ static const struct of_device_id vcnl_4000_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, vcnl_4000_of_match);
>
> +static int vcnl4000_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + pm_runtime_dont_use_autosuspend(&client->dev);
> + pm_runtime_disable(&client->dev);
> + iio_device_unregister(indio_dev);
> + pm_runtime_set_suspended(&client->dev);
> +
> + return data->chip_spec->set_power_state(data, false);
> +}
> +
> +static int __maybe_unused vcnl4000_runtime_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + return data->chip_spec->set_power_state(data, false);
> +}
> +
> +static int __maybe_unused vcnl4000_runtime_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + return data->chip_spec->set_power_state(data, true);
> +}
> +
> +static const struct dev_pm_ops vcnl4000_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(vcnl4000_runtime_suspend,
> + vcnl4000_runtime_resume, NULL)
> +};
> +
> static struct i2c_driver vcnl4000_driver = {
> .driver = {
> .name = VCNL4000_DRV_NAME,
> + .pm = &vcnl4000_pm_ops,
> .of_match_table = vcnl_4000_of_match,
> },
> .probe = vcnl4000_probe,
> .id_table = vcnl4000_id,
> + .remove = vcnl4000_remove,
> };
>
> module_i2c_driver(vcnl4000_driver);

Next message: Andrew Murray: "Re: [PATCHv9 01/12] PCI: mobiveil: Re-abstract the private structure"
Previous message: Michael S. Tsirkin: "Re: [PATCH RFC] virtio_balloon: conservative balloon page shrinking"
In reply to: Guido GÃnther: "[PATCH v3 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]