Re: [PATCH v2] dt-bindings: convert extcon-usbc-cros-ec.txt extcon-usbc-cros-ec.yaml

[Enric Balletbo i Serra]

Hi Dafna,

On 5/2/20 12:00, Dafna Hirschfeld wrote:
> convert the binding file extcon-usbc-cros-ec.txt to yaml format
> This was tested and verified on ARM with:
> make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
> 
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
> ---
> Changes since v1:
> 1 - changing the license to (GPL-2.0-only OR BSD-2-Clause)
> 2 - changing the maintainers
> 3 - changing the google,usb-port-id property to have minimum 0 and maximum 255
> 
>  .../bindings/extcon/extcon-usbc-cros-ec.txt   | 24 ----------
>  .../bindings/extcon/extcon-usbc-cros-ec.yaml  | 45 +++++++++++++++++++
>  2 files changed, 45 insertions(+), 24 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt
>  create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
> 
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt
> deleted file mode 100644
> index 8e8625c00dfa..000000000000
> --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -ChromeOS EC USB Type-C cable and accessories detection
> -
> -On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
> -able to detect the state of external accessories such as display adapters
> -or USB devices when said accessories are attached or detached.
> -
> -The node for this device must be under a cros-ec node like google,cros-ec-spi
> -or google,cros-ec-i2c.
> -
> -Required properties:
> -- compatible:		Should be "google,extcon-usbc-cros-ec".
> -- google,usb-port-id:	Specifies the USB port ID to use.
> -
> -Example:
> -	cros-ec@0 {
> -		compatible = "google,cros-ec-i2c";
> -
> -		...
> -
> -		extcon {
> -			compatible = "google,extcon-usbc-cros-ec";
> -			google,usb-port-id = <0>;
> -		};
> -	}
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
> new file mode 100644
> index 000000000000..fd95e413d46f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ChromeOS EC USB Type-C cable and accessories detection
> +
> +maintainers:
> +  - Benson Leung <bleung@xxxxxxxxxxxx>
> +  - Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> +
> +description: |
> +  On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
> +  able to detect the state of external accessories such as display adapters
> +  or USB devices when said accessories are attached or detached.
> +  The node for this device must be under a cros-ec node like google,cros-ec-spi
> +  or google,cros-ec-i2c.
> +
> +properties:
> +  compatible:
> +    const: google,extcon-usbc-cros-ec
> +
> +  google,usb-port-id:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +    description: the port id
> +    minimum: 0
> +    maximum: 255
> +
> +required:
> +  - compatible
> +  - google,usb-port-id
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    cros-ec@0 {
> +        compatible = "google,cros-ec-i2c";

Now that you are here ... could you use compatible = "google,cros-ec-spi" here?

The reason is that the label above, cros-ec@0 is not really correct for an i2c
device because after the @ you should put the address, cros-ec@1e will have more
sense here. But cros-ec-i2c is rarely used, so I'd change the compatible to use
"google,cros-ec-spi" and the entry "cros-ec@0" is fine.

> +        extcon {
> +            compatible = "google,extcon-usbc-cros-ec";
> +            google,usb-port-id = <0>;
> +        };

And maybe would be useful have a more complete example like this?

    cros-ec@0 {
        compatible = "google,cros-ec-spi";

	usbc_extcon0: extcon@0 {
		compatible = "google,extcon-usbc-cros-ec";
		google,usb-port-id = <0>;
	};


	usbc_extcon1: extcon@1 {
		compatible = "google,extcon-usbc-cros-ec";
		google,usb-port-id = <1>;
	};
    };