Re: [PATCH V3 1/2] mfd: qcom-spmi-pmic: Convert bindings to .yaml format

[Stephen Boyd]

Quoting Kiran Gunda (2020-02-06 05:55:26)
> Convert the bindings from .txt to .yaml format.
> 
> Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
> ---

Did something change? Is there a cover letter?

> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> new file mode 100644
> index 0000000..affc169
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/mfd/qcom,spmi-pmic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SPMI PMICs multi-function device bindings
> +
> +maintainers:
> +  - Lee Jones <lee.jones@xxxxxxxxxx>
> +  - Stephen Boyd <sboyd@xxxxxxxxxxxxxx>

Please change this to sboyd@xxxxxxxxxx

> +
> +description: |
> +  The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
> +  PMICs.  These PMICs use a QPNP scheme through SPMI interface.

This first sentence will need continual updating. Please drop it.

> +  QPNP is effectively a partitioning scheme for dividing the SPMI extended
> +  register space up into logical pieces, and set of fixed register
> +  locations/definitions within these regions, with some of these regions
> +  specifically used for interrupt handling.
> +
> +  The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
> +  interfaced to the chip via the SPMI (System Power Management Interface) bus.
> +  Support for multiple independent functions are implemented by splitting the
> +  16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
> +  each. A function can consume one or more of these fixed-size register regions.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,pm8941
> +      - qcom,pm8841
> +      - qcom,pma8084
> +      - qcom,pm8019
> +      - qcom,pm8226
> +      - qcom,pm8110
> +      - qcom,pma8084
> +      - qcom,pmi8962
> +      - qcom,pmd9635
> +      - qcom,pm8994
> +      - qcom,pmi8994
> +      - qcom,pm8916
> +      - qcom,pm8004
> +      - qcom,pm8909
> +      - qcom,pm8950
> +      - qcom,pmi8950
> +      - qcom,pm8998
> +      - qcom,pmi8998
> +      - qcom,pm8005
> +      - qcom,spmi-pmic

I think we want qcom,spmi-pmic to be there always. To do that we need it
to look like:

  compatible:
    items:
      enum:
        - qcom,pm8941
        ...
      enum:
        - qcom,spmi-pmic

> +
> +  reg:
> +    maxItems: 1
> +    description:
> +      Specifies the SPMI USID slave address for this device.
> +      For more information see Documentation/devicetree/bindings/spmi/spmi.txt
> +
> +patternProperties:
> +  "^.*@[0-9a-f]+$":
> +    type: object
> +    description:
> +      Each child node of SPMI slave id represents a function of the PMIC. In the
> +      example below the rtc device node represents a peripheral of pm8941
> +      SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
> +
> +    properties:
> +      compatible:
> +        description:
> +          Compatible of the PMIC device.
> +
> +      interrupts:
> +        maxItems: 2
> +        description:
> +          Interrupts are specified as a 4-tuple. For more information
> +          see Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt

Just make this bindings/spmi/qcom,spmi-pmic-arb.txt so that  we don't
have to worry about it. Why is max items 2? Isn't it 4? Is this property
supposed to be specified at all?

> +
> +      interrupt-names:
> +        description:
> +          Corresponding interrupt name to the interrupts property

Does this need to be specified either?

> +
> +    required:
> +      - compatible
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    spmi {
> +        compatible = "qcom,spmi-pmic-arb";
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +
> +       pm8941@0 {

pmic@0

> +         compatible = "qcom,pm8941";
> +         reg = <0x0 0x0>;

Why not include the header file to get the SPMI_USID macro?

> +
> +         rtc {
> +           compatible = "qcom,rtc";
> +           interrupts = <0x0 0x61 0x1 0x1>;
> +           interrupt-names = "alarm";
> +         };
> +       };
> +
> +       pm8941@1 {

pmic@1

> +         compatible = "qcom,pm8941";
> +         reg = <0x1 0x0>;
> +
> +         regulator {
> +           compatible = "qcom,regulator";
> +           regulator-name = "8941_boost";
> +         };
> +       };
> +    };
> +...
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>  a Linux Foundation Collaborative Project