[PATCH v4 09/18] usb: dwc3: qcom: Override VBUS when using gpio_usb_connector

[Bryan O'Donoghue]

Using the gpio_usb_connector driver also means that we are not supplying
VBUS via the SoC but by an external PMIC directly.

This patch searches for a gpio_usb_connector as a child node of the core
DWC3 block and if found switches on the VBUS over-ride, leaving it up to
the role-switching code in gpio-usb-connector to switch off and on VBUS.

Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Cc: Felipe Balbi <balbi@xxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Cc: linux-usb@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Acked-by: Felipe Balbi <balbi@xxxxxxxxxx>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 261af9e38ddd..b2d20b474029 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -550,6 +550,21 @@ static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
 	.ss_phy_irq_index = 2
 };
 
+static bool dwc3_qcom_find_gpio_usb_connector(struct platform_device *pdev)
+{
+	struct device_node	*np;
+	bool			retval = false;
+
+	np = of_get_child_by_name(pdev->dev.of_node, "connector");
+	if (np) {
+		if (of_device_is_compatible(np, "gpio-usb-b-connector"))
+			retval = true;
+	}
+	of_node_put(np);
+
+	return retval;
+}
+
 static int dwc3_qcom_probe(struct platform_device *pdev)
 {
 	struct device_node	*np = pdev->dev.of_node;
@@ -557,7 +572,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	struct dwc3_qcom	*qcom;
 	struct resource		*res, *parent_res = NULL;
 	int			ret, i;
-	bool			ignore_pipe_clk;
+	bool			ignore_pipe_clk, gpio_usb_conn;
 
 	qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
 	if (!qcom)
@@ -649,9 +664,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	}
 
 	qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
+	gpio_usb_conn = dwc3_qcom_find_gpio_usb_connector(qcom->dwc3);
 
-	/* enable vbus override for device mode */
-	if (qcom->mode == USB_DR_MODE_PERIPHERAL)
+	/* enable vbus override for device mode or GPIO USB connector mode */
+	if (qcom->mode == USB_DR_MODE_PERIPHERAL || gpio_usb_conn)
 		dwc3_qcom_vbus_overrride_enable(qcom, true);
 
 	/* register extcon to override sw_vbus on Vbus change later */
-- 
2.25.0